Vaillant Diverter Valve Leaking. Simple Maintenance to STOP it from Leaking

Подписаться 45 тыс.

Просмотров 23 тыс.

50% 1

Vaillant Diverter Valves very often leak. I will show you a simple bit of maintenance which will stop it from leaking or significantly extend its life. So you don’t have a leaking boiler and a costly repair.
I will also show you a setting on your Vaillant boiler which may be on with out you knowing about it. Which may be wasting gas. I will show you how to turn this setting Off which will reduce your gas bill.
If you want to support me further you could get me a cup of coffee and leave a donation in my “TOOL BOX FUND”.
That is really appreciated.
www.paypal.com/donate/?cmd=_s...
Please don’t forget to SUBSCRIBE and click the BELL for notification for my new videos.
Share me with your friends.
Visit my Web site where all my videos are categorised to make them easy to find.
With links to parts and products I recommend.
www.markballard-ltd.com
If you have a similar story or a question you can leave it in the comments.
“As an Amazon Associate I earn from qualifying purchases”.
Links To Other Help Videos.
VIDEO: How and Why you should add "INHIBITOR" to your heating system. Including "System Cleaner" and other "Chemicals"..
• How and Why You Should...
VIDEO: How to Operate Your Vaillant ecotec Pro Combination Boiler .
• How to Operate Your Va...
VIDEO: How to Operate Vaillant ecoFit Pure Combination Boiler.
• How to Operate Vaillan...
VIDEO: How to Operate Your Vaillant ecotec Plus Combination Boiler .
• How to Operate Your Va...
VIDEO: How to Replace a Vaillant Diverter Valve.
Coming Soon.
VIDEO: How to Use a Vaillant Diverter Valve Repair Kit.
Coming Soon.
VIDEO: How To Operate and Adjust Your Vaillant 24 Hour Time Switch.
• How To Operate and Adj...
VIDEO: How to Clean Vaillant Filter and Glowworm Filter, Vaillant Protection Kit Cleaning.
• How to Clean Vaillant ...
VIDEO: 10 Money Saving Heating Tips. Simple Things You Can Do Which Will Improve Efficacy Save Gas / Money.
• How to Reduce Your Gas...
Video: How to Balance your Heating System. Which will reduce your Gas Bill.
• How to Balance Your He...
VIDEO: Is your boiler continuously losing pressure. What's the problem.
• Boiler Keeps Losing Pr...
VIDEO: How to Fix a Radiator NOT Getting Hot! Most common Reason.
• How to Fix Cold Radiat...
VIDEO: How to replace a leaking Radiator Valve. With out draining the system.
• Replace Radiator Valve...
VIDEO: How to replace a Radiator with out draining the system.
• How to Replace a Radia...
VIDEO: How to replace a Central Heating Pump. All you need to know. With out draining the system.
• How to Replace Your Ce...
VIDEO: How to remove a radiator for decorating.
• How to Remove Radiator...
VIDEO: How to refit a radiator after decorating..
• How to Refit a Radiato...
VIDEO: How to repair leaking radiator blanking plug.
• How To Repair a Radiat...
VIDEO: How to flush out your radiator.
• How to flush Out a Rad...
VIDEO: How to Paint/Spay your Radiator. with a sparkle finish.
• Radiator Spraying / Pa...
VIDEO: How to clean the MagnaClean Professional 1
• How to Clean the Adey ...
VIDEO: How to clean the MagnaClean Professional 2
• MagnaClean Professiona...
VIDEO:, How to add Inhibitor to a MagnaClean Professional 2
• MagnaClean Professiona...
The Gas Safe Register.
www.gassaferegister.co.uk
Chapters
0:00 Vaillant Diverter Valve Leaking, How to Stop it from Happening! Intro
2:44 Vaillant Diverter Valves Leaking, How to Fix.
3:32 Vaillant Diverter Valve Squirting out Water!!
3:50 Vaillant Diverter Valve Removing the Motor.
5:49 Vaillant Diverter Valves Spindle sticking.
6:42 Vaillant Diverter Valves Greasing the Spindle.
7:54 Vaillant Diverter Valves Fitting the Motor.
8:58 Vaillant Diverter Valves in Operation.
10:34 Vaillant Comfort Setting, Warm Start, Pre Heat.
Recommended Tools.
LINK: Monument 15mm & 22mm Olive Removing Tool
www.markballard-ltd.com/recomm... (amazon).
LINK:Nerrad Fire Jet Blow Torch. Highly Recommended.
www.markballard-ltd.com/recomm... (amazon).
LINK: Nerrad 15mm Pipe Slice.
www.markballard-ltd.com/recomm... (Amazon).
LINK: 15mm and 22mm Cheap Pipe Slices Pair. Really good value. Recommended. www.markballard-ltd.com/recomm... (Amazon).
LINK: Water Vacuum. I use this vacuum daily. Highly Recommended. www.markballard-ltd.com/recomm... (Amazon).
LINK: Head Lamp torch. I use this daily. I keep it in my pocket supper bright. Highly Recommended. www.markballard-ltd.com/recomm... (Amazon).
If you want to support me further then please leave a Donation in my
“TOOL BOX FUND”.
www.paypal.com/donate/?cmd=_s...
“As an Amazon Associate I earn from qualifying purchases”.

Опубликовано:

31 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@douglaughton7626 7 месяцев назад

This is a very good video. Vaillant divetor valves are amongst the best

@Carl-re6zb Год назад

Very clear and concise Mark. Thank you for sharing

@russellgadbury364 7 месяцев назад

Excellent video Mark many many thanks for this, I am looking at a failed Vailant tomorrow and this may cut down some time spent faultfinding :) Keep up the good work! :)

@maher8653 Месяц назад

thankyou Mark

@MSKChess Год назад

top notch Mark, I used to think it was a design fault on the vaillant never thought it was simply the o-rings drying out.

@masa4936 Год назад

This guy is brilliant!

@orhan2674 6 месяцев назад

Thank you very much for this useful sharing.

@takeiteasy6154 5 месяцев назад

Thanks for your help, regarding diverter valve, I had the boiler short cycling only for hot water, and it was the spring loaded valve in the stuck open position, a replacement solved it.

@KingdomAmbassador-du9rh 9 месяцев назад

Excellent video and explanation.

@nihalhirani4105 8 месяцев назад

great, good video work very clear

@johnpemberton5837 5 месяцев назад

Thanks, mine was not leaking, but making a lot of noise every time it moved which probably meant it was very dry. Put some silicon on it and now much quieter. Always wondered why this valve activates randomly during heating, even when no hot water is being drawn.

@leonulas1106 2 месяца назад

Excellent video Mark.Many thanks. After trying to replace the diverter valve cartridge, I over tightened diverter valve's "motor retaing nut" and it broke. Do you know anywhere that I can buy the motor retaining nut only , not the whole plastic set?

@luisangelrevillavallecillo7166 Год назад

Hola muy interesantes tus vídeos te propongo poner subtítulos en español para tus seguidores de España y nuestros hermanos que hablan español que somos muchos y nos interesa tu contenido. Un saludo desde Cantabria 🇪🇦

@byEY 3 месяца назад

How about grease the spindle through the little hole up there since you can see the spindle from there?

@russellsification 26 дней назад

excellent instruction. My rads are getting warm when i use the hot water. The valve looks like it is working ie going in and out. Any suggestions?

@davidwilson2248 9 месяцев назад

Hi Mark Vaillant Eco Boiler not heating radiators. What I found the brass nut holding the diverter had become very loose to the point it was ready to fall off. I what I need to know the shaft that screws into the motor is there a position setting for this shaft. If I operate the diverter by hand I can get the radiators red hot when we have a bath I have to pull the diverter shaft back to get hot water, I just can't seem to find the correct position for this shaft in the motor. Thank You

@harpssingh1477 Год назад

Trying to get hold of silicone grease can we use plumbers grease instea

@Hu4est Год назад

I have one of those boilers, and recently I've noticed that when the central heating comes on, the radiators only get lukewarm until I run a hot water tap till the water gets hot. Then the radiators heat up like they should. Could it be the diverter valve sticking, and would this simple fix help?

@jasonannesley5889 Год назад

Does the motor screw left & screw right to pull the plunger in & out.

@RayMondElec Год назад

Excellent video. When servicing the spindle. Do you have to drain the boiler down first. Since if the shaft is seized and one is not careful would the white plastic assembly come out . And you would have a flood situation? Thanks

@MarkBallardLTD Год назад

If it did come out you would have a flood. But its under pressure all the time from boiler system pressure. So wont come out unless you unclip it from the sides.

@davep4703 Год назад

Hi great video on the greasing of the diverter valve, but because there is a inspection hole at the top of thd valve motor assembly, can't you regrease the shaft from this hole using the front reset button to get the shift to move in and out greasing the dry running O ring. Regards Dave Porter London

@MarkBallardLTD Год назад

Yes sure you can

@machiavelli6996 4 месяца назад

I’ve changed my diverter valve and it’s still leaking when I put the heating on? Any tips pls

@harpssingh1477 Год назад

Mark, my valliant ecotech plus 831 has a drip at the bottom of the divertor vale. It has been slowly losing water needs top up every month. But recently i just put it in hot water mode and it need top up every other day. What greese do i need to greese up the spindle.

@harpssingh1477 Год назад

However when in heating mode it doesn't drip

@147seamus Год назад

Could this valve be the reason I only get luke warm water ?

@MyProjectBoxChannel Год назад

It's very easy to get to the o-rings that seal on the spindle shaft and replace them. O-rings are very cheap and it's the only thing that need replacing, and not the entire diverter valve. You can get a tool to remove the cartridge. Then remove the retainer washer, and the o-rings are easy removed. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FsaE4aLehrE.html

@michaelward7690 Год назад

Hi my diverted valve is leaking at the back is this anything you have come across.many thanks.

@MarkBallardLTD Год назад

Just unlucky. Probable just needs new seals. That does mean removing the whole Valve.

@michaelward7690 Год назад

Hi Mark just a quick update.i was told I needed a new back plate.so I went and got 2 o rings at£3.74.and Did it myself whilst cooking Sunday dinner.and yes it was fab .and fix the leek.

@masa4936 Год назад

Hello Mark is there a link on how to purge air from a Vaillant after installing a diverter cartridge?

@JayGasEssex Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Lj5Tqwzw0uM.html&t

@horizon8386 Год назад

So let me get this straight, you are saying a “DIY’er” can do this maintenance?? But the diverter is inside the boiler! Your saying an unqualified person can do this?!? But unqualified removing a front cover ( critical case seal!! ) is ok?? It’s against gas regs!!!! If that case isn’t put back correctly and a burner/ flue seal fails then POC could enter the room!! Remember these are positive pressure from the outlet of the fan onwards!!! YOUR ADVICE IS FLAWED AND DANGEROUS!!!!!!

@NeilRidley1 Год назад

I was just about to write the same thing ,after watching some of his videos offering poor advice, no way should any gas safe engineer be endorsing a DIYer to be removing the case of a balanced flue appliance, absolutely clueless !

@horizon8386 Год назад

@@NeilRidley1 absolutely crazy!! And another video showing people how to “fix” and F76 fault by just changing the thermal fuse instead of the complete heat exchanger!! This guy is dangerous!!

@NeilRidley1 Год назад

Are you seriously suggesting a non gas safe registered engineer to remove the front case on a vaillant boiler?

@NeilRidley1 Год назад

Can I take the case off my gas appliance? It depends on whether the case is purely decorative or whether it is an integral part of the appliance. Decorative casing: These cases can usually be removed by the consumer e.g. can be lifted off or are hinged panels and do not need to be unscrewed. A decorative case can be removed safely by the consumer or anybody else remembering to follow any manufacturer's instructions and warning labels and making sure you have safely isolated any electrical parts. However, if you are in any doubt, always use a Gas Safe registered engineer. Integral casing: Many appliances have cases, which in addition to being decorative, function as a part of the combustion circuit and form an important seal around the gas carrying components e.g. burner, combustion chamber, gas valve etc. If removing the case involves undoing a number of screws, this normally means it is a functional case and it should not be removed by the consumer or a person who is not Gas Safe registered.

@TheBadoctopus Год назад

In the case of these vaillant /gloworm /heatline shared architecture boilers, the front cover is purely decorative and not sealed at all. This valve is a weak point and well within the realms of DIYer capabilities, also it's not near any gas, combustion or pressure parts. People are generally smart enough to leave the "explody" bits to the professionals and handle basic maintenance of wear and tear items like these themselves - whatever the law or regs say. That's the reality.

@NeilRidley1 Год назад

@@TheBadoctopus your as clueless as this muppet if you believe the front cover of a vaillant ecotec does not form part of the case seal and if you are gas safe registered it’s time you resit your ACS

@MrKonquer Год назад

@@TheBadoctopus no you’re completely wrong, if you look on page 10 and 11 of valiants part list, item number 7 is the called the cover, that’s the front panel swing arm which covers the controls, this you are allowed to change yourself as a diy’er, but to remove the whole front panel you need to be gas safe registered as inside it’s covered in a foam seal, that front panel is part of the burner assembly because it’s a negative pressure flue if you look at the black plastic air duct inside it’s attached to the fan and that’s on the gas valve, negative pressure flues push the products of combustion out of the flue which in turn draws air in from outside into the boiler itself not directly into the burner that’s why if I stabbed a hole into the case with a screwdriver your boiler would be categorised as AR “at risk of causing damage to life” that’s why rubber grommets missing on wires in are classed as AR too