VEVOR DIESEL SHOP HEATER DETAILED INSTALL & REVIEW 

For the 12V power source instead of using a car battery this is what i found as a solution which is right here amzn.to/3NudanI Thanks for your love yall. Remember this december Jesus Christ is the reason for the season. God bless yall!

you should maybe add a metal bracket to get that exhaust farther away from the wood exterior.

Great job man! Now you’ll be toasty and able to paint all year round! Had the same problem in Oklahoma, now that I live in Nevada not to much of an issue due to the warmer weather. Keep spreading the word of god!!!

The Heater is FANTASTIC for the set up your Doing my Friend ( BLESS Y O U 🙏)

Awesome 😎

You have the thermostat above the heat vent. The thermostat will shut the heat off before the far side of the garage is warmed up.

Great job

When I came to Jesus, everything changed. I was healed from several ailments. My then, girlfriend and I got married, our relationship is awesome. We put Jesus 1st and He has seen us through many thing that would have been hardships. We are blessed. God bless you for telling people about the gospel!

Well done, nice work. To improve the system turn the pump at an angle of 30° (inlet lower than out let), direct the exhaust tube toward the ground, remove both the muffler at exaust and the air filter at intake tube😉

Based and warm

I've fitted one to my off grid garage and there great that good I've fitted one on my house to. Good job 👍

That looks like it would be a great way to heat a garage.

I’m definitely gonna need one. My garage gets stooooopid cold.

Can you do an update video for this in the future? I've been looking for heat solutions for my garage as well and curious how this will hold up throughout the winter. As always, God bless.

You should do a video on how long it takes to warm up on one of you're coldest nights or simulate opening the doors and closing them back up. Good bless you buddy

I wish i had something like that when I had old aircooled VWs. Lol

Need to get my cnc shop area completely walled in and get some heat source in there. Trying to sit out there n do signs in the cold and wind isnt fun 😂

Good video bro GBY

1st!

👍💪

That thing needs a full motec exhaust😜

Question, do you think it would help if you put a fan in front of the heat outlet? To help circulate the heat better?

👍💫✨️💫💯💯😎

Damn I must be built different I had to turn down my heater (set to 60°) in my garage because I was sweating working in it today. I'm in IL

Sometimes you use 2x paint and primer by Rustoleum other times you use the Rusteloum Protective Enamel. Why? I’m trying to paint my sons bike without adding more cost by using a finishing protective coat.

You need to turn the muffler the other way, there is a hole on the bottom to allow the exhaust liquids to drain

You put the exhaust on the fresh air intake side and it has the great possibility to suck in the exhaust and send it into the building, for one thing, second,, the pump needs to be at 30-45 degree angle to vacate air in the system and pump to run properly,,, and your intake filter is also above the exhaust so can take in exhaust fumes into burn chamber.. and we all know the heated exhaust will rise, so it will be taken into fresh air intake for the heat and into burn chamber air supply...bottom line, for safety.. turn your exhaust to opposite side/way you have it.. plus as another said,,, your muffler is upside down, the drain hole for moisture should be pointed down,, Safety, Safety, Safety

Thirth!

What size converter would you need to run this on 110?

Mounted it right beneath the air intake. Going to be sucking in diesel fumes, no?

So I'm installing this OUTside?? The Chinese instructions are severely lacking....

Be careful because that exhaust pipe will get SUPER hot!

You need to do some research on those heaters before installing one. You did it all wrong. 1)Your fuel line should be replaced. That aquarium air line they send with is junk, can swell, leak and start a fire. Replace it! 2) Your fuel pump should be mounted at a 45 degree angle so the output end it up to pump out the air bubbles.(they're designed that way) 3) You should run a cold air return out of the building to the back of the unit so you re-heat the inside air and not try to heat cold outside air. It will work more efficiently as it's intended to. The whole unit should be installed inside the shop and just the exhaust and fresh air tube be going outside. That's the correct way in this case. 4) Your fuel filter is on backwards. 5) Take that low spot out of the exhaust. Moisture will settle there and shut the unit down (yes they get condensation in there) 6) Your exhaust gets over 500 degrees so you may want to get some other kind of brackets to hold it to the shed! You're going to start it on fire with it against the siding like that!! So...This video should have been titled, "How NOT to install a diesel heater"!

You are heating cold outside air to blow into a building? Interesting. If you noticed, furnaces are usually on the inside of a building and just re-heat the air, with a cold air return, which takes much less fuel. That heater is designed to be installed INSIDE the building. Then you just plumb the exhaust and combustion air intake to the outside. Yours is all backwards. And also you should not use that cheap green fuel line. It's not very good and could start a fire.

I do want to mention these heaters do not last!

Not sure if u mentioned the$$$ ? Very cool heater! Could you make branch’s for heat output, make several ducts to heat more space faster? Gotta love your enthusiasm and hard work ethics! Nice how the know it all’s are always there to call you out on mistakes! Like instructions are wrong or something!! Keep on keeping on Dude! GOD BLESS YOU!! Maybe there is hope for our beautiful country after all! 😎🫡🙏🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸