Vevor Vinyl Cutter: Unboxing, Set Up and Use 

The 60 degree blade is for very small letters and for material like reflective and some htv vinyls. I install my blades to where you can barely see the blade ...it's always good to do a few test cuts to make sure you're only cutting barley thru the vinyl and marking the paper backing ..not cutting the backing paper

VERY helpful even for other models (I have a 720T). Thank you so much for taking the time - the instructions manual is very basic.

Very comprehensive tutorial. I have a smaller Vevor coming and found this very helpful!!

I have had twp vevor vinyl cutters that took a dump with in a month. I found for affordability US Cutter has been great I have a 28in and 48in..I'm also not a fan of the sign software it comes with.

Interesting technology. I can think of a lot of applications for it.

That was great!! Very helpful video, thank you very much sir.

thanks a lot this video helped heaps

LET'S GO CLAY!!!🏁 19:30... that's a really nice option in a pinch if you need to get a gasket for an old car that isn't readily available you can get some gasket material Trace that sucker out and make your own Btw...(Vee-Vor)...Clay...👍 Vevor Home sells alot of hobby stuff...

Thank you! Very helpful 😊

Great job, I needed to see for myself. Just bought one. Double click to set home is the only thing I noticed.

Great detail video. I was thinking of getting one

Vevor vinyl cutters have a major flaw. I know I have owned two. The pinch rollers dig into the material. Its fine if its a small piece you only use the rollers on the edge of the material but when cutting larger pieces you need the center pinch roller so it tracks. You get what you pay for!!

Great detail video. I was thinking of getting oneand i make 200 liks for U😉

Nice Tutorial. Will Signmaster cut inside Adobe Illustrator. I do most of my vector inside Illustrator. also what is the cache storage on the cutter? Thank you sir

I made my son a sign for his popsicles with that magnet. I didn’t realize ,until a month ago, where that roll of magnet came from. I’ve had my machine for over 2 years now 😂

Svg is scalable vector graphic. Not all software will read svg, cdr or ai eps is probably the easiest vector because of all the different software that will read the eps image. Svg is the basic format most crafters use for cricut and other cheap craft cutters.

The oracal 651 is a 5-6 year exterior life 7-9 year that was quoted is for oracal 751

This is a very thorough review. Thank you. I will share this with someone who just unboxed one of these. I’m considering getting one myself. Do you know if it will work with the Silhouette Studio software? It allows you to save as SVG files as well. Again, thank you.

How can I put in a design I have already made/ Do I have to create from scratch cannot find any info. Thank you. great video

Awesome information

So you are not using the program to let the device know what you want to cut? Could I use Design Space and send it to this cutter?

Love this video

I just bought one because the only software that I know for sure will run my Seiki plotter cost way too much. The only Flexi license I have only works on Wln 7. If I knew Vinylmaster would do it, I would just buy the software. As for the Vinyl that ships with it, it's useless to me, as I use plotters for low tach masking film only.

Is there alternative software I can use I have a machine but don't have all the original extras or software

Cool machine..... Now can you make me some Snap-On stickers to put on my us general toolbox?

Hey Clay, how about making some Koon Trucking stickers? I'd be happy to send you some $ for them!

question..the serial number from sign master is lifetime or 3 pc uses only?thanks

Good review

Hi, how is the plotter holding up? Still going good or did you have any sort of issue now that it's been a few months since you got it?

Is this able to do contour cutting for labels/stickers

Can it be used to cut mylar stencil for smt pcb stencil. 0.5mm pitch size. Mylar thickness 0.3mm.Thanks

How many cost of this cutting plotter

Can I use this tool to put customized vinyl on my corn hole boards.

What is the best laptop to use with that cutting machine ?

I just set up my vinyl cutter and I cannot get it to cut

I have been loooking to do some vinyl work, this machine looks like a good deal for what I am wanting to do. Is it a different type of vinyl that would be used to make vinyl lettering for a vehicle since you don't peel and stick it?

Do you know how to change the offset for blade angles?

I agree with you on Illustrator. I used it for years. upgraded several times. but then had to stick with CS3. had a computer crash and attempted to reinstall and couldn't. contacted Adobe and they said it was no longer supported and said I couldn't use it. So PO'd I just threw my $250+ software with the box and the registration codes in the trash.; But I do have Corel. most recent was 17. Pretty sure I didn't have any issues reinstalling. I used Signtools for my old Panther cutter. now for the questions and a little history. A friend bought a USCutter MH-871 several years ago and never used it. She gave it to me since she was moving and thought I could use it. I was unable to get it to cut properly. It's still sitting here and not working. it won't move side to side............it just grinds away. The tech support guy was very nice and did give me something to try, but though it was most likely a bad MB which could be replaced for $80. What is your opinion of US Cutter vs Vevor? Seriously considering buying this one. My old Panther cutter is only 24" and the original software that I got - won't work with Windows 10. I have all the old disks, etc. Flexi-Sign was the software. too expensive to upgrade. How is the customer support on the Vevor and are there any dealers around the country. USCutter only ships cutters. They don't have any 'shops' around. I'd really love some input. thank you and thanks for the video. If I purchase one - I'll most likely be re-watching it.

Where do you find a spare cutters?

Hi Can i cut directly from corel ?

what size of vynil should i use i have the exact same cutter and want to order some but what measurements should i look for

I got a 53" but my blade holder doesn't sit flush like yours the gold knob tightens though. What should I do?

Does this support Coral draw?

👍💯

Inkscape is my go to.

good Sunday morning Clay. how is your new foam gun?

where is justin located in tupelo

Whats the longest the cutter can cut?

so the vinyl that comes with the plotter is only for stickers?

Can you use this for tshirts

Great video!! But please clean those finger nails before fillming next time!! Still a great vid, just a little gross-LOL 🙃

My man you was keeping pieces of black vinyl under your nails😅😅😅😅

No rundown on the tools used, heresy 🤣

What kinda wire cutters were they??