Victron powerwall - layout & install of hardware

Подписаться 1,8 тыс.

Просмотров 2,1 тыс.

50% 1

I this video I remove the old inverter/charger & cable gutters and start from a blanc canvas to install the victron inverters and chargers.
Don't worry wont bother you with the installation of all cable gutters, just one as an example.
DIY 60KWh powerwall built
More information about this and other battery projects: www.easypowerwa...
I share my documents, PDF, gerberfiles, circuit diagrams here: www.easypowerwa... click on: parts/tools scroll to the bottom of the page.
Victron gear used in this video:
Victron charger: amzn.to/42NTC2o
Victron inverter: amzn.to/3Jq435a
Victron shunt 500A: amzn.to/3Nj1ymp
Victron cerbo: amzn.to/3PlhcjO
Link to all other tools & parts to built your own powerwall: sites.google.c...
For recording my YT clips I'm using a DJI pocket: amzn.to/3N7rt26
Disclaimers:
This video is for information purposes only. Be aware building a powerwall is not like making a Bob Ross painting....mistakes can cause large unhappy accidents.
If you have no experience with electrical connections or solar, please contact an experienced technician.

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@jwsolarusa 9 месяцев назад

Hello and thank for sharing your thoughts. I am your 1,002 SUBSCRIBER.

@easypowerwall 9 месяцев назад

The pleasure is all mine sir.

@kevinmatthews2620 Год назад

Franky nice video as usual, BUT the links for the victron inverter do not work they just show either the cerbo or the shunt/charge controller nothing for the inverter ??

@easypowerwall Год назад

Thanks for the remark Kevin. I added the 3000VA/48V model.

@MrMoefke Год назад

Hey Franky, wil jij eens een voordracht geven over jou installatie ? Ik zoek nog een aantal speakers op een event dat ik wil organiseren rond zelf bouw. En aangezien je al redelijk wat ervaring hebt met bouwen.

@easypowerwall Год назад

Had gehoopt met de videos geen presentaties meer te moeten geven. Wie weet in de toekomst, stuur me eens een mailtje en dan kijken we wel wat er mogelijk is.

@Thunderst0rn 9 месяцев назад

Zeer interessante video, bedankt om te delen! Misschien kan een multitool iets handiger werken dan de decoupeerzaag voor de kabelgoten.

@easypowerwall 9 месяцев назад

Hey, bedankt voor de info. Idd een multitool was handig geweest, bedankt voor de tip.

@robjuurlink490 Год назад

Curious to know if you also installed some form of heating? To still be able to charge the batteries during very cold (and sunny) weather. For myself I have to decide to install heating. The installation is outside the house and in winter it can be very cold (Hungary). Two options. Disable charging during cold temperatures or install heating. Not sure yet.

@easypowerwall Год назад

Hi Rob. Concrete walls are 18cm thick, so temperature is pretty stable. I live in north Belgium we have very few days of temp below minus 10. During these short/cold days I prefere not to use the system. If temp goes below 2degr...charging is halted. In short no heating foreseen.

@wilcostienezen9403 Год назад

Nice video, zie goede tips voor mijn eigen installatie.

@easypowerwall Год назад

Bedankt voor leuke feedback. Volg het kanaal voor meer interessante content. Tot gauw.

@Electronzap Год назад

Nice build.

@mrgruisinge Год назад

Isn't Victron equipment wonderful? Never have to worry if it will work. Tried others and just gave up on them. Victron has just worked as it should since install 11 months ago.

@easypowerwall Год назад

I agree, you pay a premium price but it works out of the box, no hassle.