Gracias, saludos desde Polonia. Części do kopiarek www.copy-expert.pl/ Facebook: facebook.com/Copy-Expert-113431678801597/ Części używane www.copy-expert.com/
my mp 5002 device is sc 819 error. I did the hdd exchange but still the problem continues. Can you show me a way to reset nvram? machine does not enter sp mode continuously please wait
There is no NVRAM reset. It's not a bad idea. You can put your NVRAM on the new PCB BOARD. If you have a problem with NVRAM, insert an SD card with new software and update nvram, but there is no procedure to reset nvram.
Hi Fandy or Tomasz. Can someone please tell me where the waste toner bottle is? I cant seem to find it. Tomasz says there no element there closed circuit?
hi,i have ricoh 5000 it shows that my toner bottle is empty but its not i am sure , it makes me print some paper and then it shows again, what i did is just pull out the bottle and put it again, it worked at first but know this problem wont go away.
Hello, sc670 Engine startup error. • Engine does not respond within 30 s after power on. • Engine down detected suddenly during power on and warmup. • BCU installation incorrect • BCU defective • Sudden communication reset occurred between the BCU and the controller. Części do kopiarek www.copy-expert.pl/ Facebook: facebook.com/Copy-Expert-113431678801597/ Części używane www.copy-expert.com/
Hi Fandy or Tomasz. Can someone please tell me where the waste toner bottle is? I cant seem to find it. Tomasz says there no element there closed circuit?
in my opinion, you must first check the sensor over the paper cassette. I know you have dupx jams, but check this sensor first, it breaks out www.copy-expert.pl/produkt.php?%20iden=15966
This code describes the error polygon motor (spinning mirror motor). If you write that earlier you "howled" it probably rubbed off. Try to undress and cleanse, sometimes helps
I understand this is not bad I would exchange the display for the beginning I do not have it but it looks like this: copy-expert.com/pl/searchquery/wy%C5%9Bwietlacz/1/phot/5?url=wy%C5%9Bwietlacz
@@MrRicoh hello, thank you, i have ricoh 4001, but i have paper jam in fusing specialy when the paper background is black. Please help me, Someone say for sensor, someone say for press, i replace press, but the problem exist. How i train service of ricoh, i mean could you kindly please introduce me resources that says all part of rico (name, instruction)? Thank you before
• ID sensor connector defective • Poor ID sensor connector connection • I/O board (IOB) defective • Poor writing of ID sensor pattern on the drum • High voltage supply board defective
Jest kilka możliwości: • Uszkodzone złącze czujnika ID • Złe połączenie złącza czujnika ID • Uszkodzona płyta we / wy (IOB) • Słabe zapisywanie wzoru czujnika ID na bębnie • Uszkodzona płyta zasilająca wysokiego napięcia
The error code in the Ricoh MP sc672 is probably a damaged controller, but you can replace the HDD first, maybe it will work. Write back if it was successful.
Description: Main fan error The main fan motor lock signal goes high for 5 s while the fan is on. Causes: • Fan motor overloaded due to obstruction • Fan connector disconnected
Description: Image transfer belt contact motor error The image transfer belt contact sensor does not detect the movement of actuator at the sensor while the polygon motor rotates. Causes: • Dirty image transfer belt contact sensor • Defective image transfer belt contact motor • Disconnected connector of image transfer belt contact sensor or motor • Disconnected cable Remedy: Check the operation of the ITB unit motor with SP5804-077. No operation: 1. Check the harness connection of the ITB contact motor. 2. Replace the ITB contact motor. Operation: 1. Check the harness connection of the ITB contact sensor. 2. Replace the ITB contact sensor.