This video shows how to fix the vertical barline of a Viewplus curve monitor. model MH-24CH. Tips and Tricks. please like, share, and subscribe. thanks.
So it's possible that those resistors have short circuited and that's why they were quiet but they unsoldered to see if the cables from the screen were unsoldered from the pcb but they stopped resisting
How to fix when the screen is blurry and cloudy I'm using VIEWPLUS | ML-24CH | 165HZ MONITOR | 23.6" currved gaming monitor? is there any best setting for the issue?
The LCD panel has a two-gate signal on the left side and right sides of the LCD screen. the left and the right gate signal is connected in parallel. If one of the sides has shorted gates, the screen will flicker or distort the image. If you cut the shorted side, the image will be normalized. Because the connection is parallel, The LCD still has the other side work. But the side has the shorted will be darker or like lower resolution.
Hi, I have a samsung curved monitor model C27HG7x and this problem occurs when I turn it on, but it heats up and the lines disappear. what would be the solution?
sir in lg s70a monitor i have logo normal and set the menu but when i try to connect with someone source via hdmi it says it doesnt exist signal i noticed the basic ic of the mainboard is very very hot in your opinion from where is coming this hot bad contacts between ic and pcb via balls and needs reballing or there is someone shunt ? thanks on advance
My monitor has this flickering at the bottom side of the screen. It starts to appear after a few minutes of using. Do i need to buy a new one or can i still fix it?
I have the same problem, exept i dont know how to fix it and theres no obviously bad chips or anything, tried the ribbon cables and display cables but nothing had changed
hello san po location niyo? and may naririnig ako na nag iiloco,may viewplus 27 165hz din po ako and kakasira lang. black screen lang siya and parang working naman siya. di ko lang sure baka backlight or anything. kasi pag sinaksak ko hdmi/dp may audio naman siya and nadedetect pa rin ng pc ko as monitor. so if po baka po dalhin ko sa inyo pag malapit lang kayo sa location ko thanks!
@@tevzTVTevatronics I have a 60 pins (2 30 pins connectors) display that I wanna put in a tv with a 80 pins (2 40 pins connectors) display, have yoy already done a video about an adaptation like this one?
There is a shorted CLK line on the side where thous resistor is been removed. It can solve the problem by disconnecting the bad clk lines. Its still work because the other side has healthy clk lines.
@@tevzTVTevatronics how about po yung screen flickering lang, hindi kana maka pag trabaho kasi panay ang flick. I check it already sa cable niya ganun padin. Same po ba ng gagawin pag binuksan ko sakin?
@@JenilynFajardo Malamng sira na yong LCD panel. Baka may crack sa loob ng panel hindi lang halata. hindi na magawan ng paraan tulad sa video content ko. Bili nalang ng bago.
@@tevzTVTevatronics If I cut even one line on right or left image is pernamently distorted with lines. I try cutting and soldering lines one by one on both sides.
