Vlan and Inter Vlan Routing using Cisco Packet Tracer Vlan configuration step by step #cisco #ciscopackettracer #Vlan #intervlanrouting #routeronastick
Holy shit was this a life saver, easy to follow and understand I managed to do this in Cisco packet tracer and in an at-home lab server with cisco actual routers. This is the perfect video to just do first then research afterwards get more descriptive of what each command does documentation
Turn on simulation and check whether the broadcast traffics are divided between your vlans. If your broadcast messages(by default pink envelops) from one vlan is not travelling to the other vlan, then your vlan is proper.
11:27 i followed all the steps except the router, i used 2901. But i dont have a fa0/0, it always says "Invalid interface type and number", what should i do?
She made an error when configuring the Router sub-interface by giving both VLAN 10 and 20 an IP address of 198.168.X.X. Should have been 192.168.X.X. How did it ping with the wrong config?
encapsulation dot1q is not the standard developed for intervlan route?????? encapsulation dot1q inserts a vlan tag to the packet. So that when the packet reaches the switch from the router, the switch can use the vlan tag to identify the vlan through which the packet will be directed.
Follow some other video sir. This youtuber is a fraud. She made mistakes after mistakes. Now to answer your question, I dont see any pc 3.But the reason for having separate gateways for each vlan is because- for the trunk cable to be able to connect both vlans to one interface we need to do sub-interface, hence providing a different ip address to each sub interface. Thus for pcs under different vlans will have different gateways accordingly.
the Rx pins of the switch are 1 and 2 and the Tx pins of the switch are 3 and 6. Whereas, the Rx pins of the router are 3 and 6 while the Tx pins of the router are 1 and 2. So how the did you connect the router and the switch with crossover cable? Its not necessary nowadays because of the introduction of Auto MDI X, so just automatically choose the cable as you have very poor knowledge.
Please don't try to teach people when you lack proper knowledge. You are misguiding so many people. Guys please report to take down this video so that other people do not suffer.