Тёмный

Volkswagen TSI Engine Production (Chemnitz, Germany) VW Factory, Engine Assembly 

KondorCars
Подписаться 188 тыс.
Просмотров 26 тыс.
50% 1

Volkswagen Engine Production, TSI Engine Factory,TFSI Engine Factory, VW Engine Assembly, Engine Manufaktur,
SUBSCRIBE for more videos 👉 bit.ly/KondorMedia 👈
Since the Volkswagen Group is German, official internal combustion engine performance ratings are published using the International System of Units (commonly abbreviated "SI"), a modern form of the metric system of figures. Motor vehicle engines will have been tested by a Deutsches Institut für Normung (DIN) accredited testing facility, to either the original 80/1269/EEC, or the later 1999/99/EC standards.[citation needed] The standard initial measuring unit for establishing the rated motive power output is the kilowatt (kW);[citation needed] and in their official literature, the power rating may be published in either the kW, or the 'Pferdestärke' (PS, which is sometimes incorrectly referred to as 'metric horsepower'), or both, and may also include conversions to imperial units such as the horsepower (hp) or brake horsepower (bhp). (Conversions: one PS ˜ 735.5 watts (W), ˜ 0.98632 hp (SAE)). In case of conflict, the metric power figure of kilowatts (kW) will be stated as the primary figure of reference. For the turning force generated by the engine, the Newton metre (Nm) will be the reference figure of torque. Furthermore, in accordance with European automotive traditions, engines shall be listed in the following ascending order of preference:
#Volkswagen
#Engine
#Production

Опубликовано:

 

2 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 4   
@mqbitsko25
@mqbitsko25 3 года назад
Where's the part where they install the Insta-Fail plastic chain tensioners?
@gustavoataria4778
@gustavoataria4778 Год назад
Los mejores del mundo...... Alemán
@neyverdandi1704
@neyverdandi1704 3 года назад
Why VW does not recommend overhauling its 1.0 TSI engine, due to the change in the dimensions of the connecting rods, pistons and crankshaft not being in accordance with the original standard, making it necessary to change the engine?
Далее
HYDRAULIC PRESS AGAINST BMW CONNECTING RODS
8:02
Просмотров 2 млн
Вопрос Ребром - Серго
43:16
Просмотров 1,5 млн
Understanding Porsche's New Six Stroke Engine Patent
21:57
Volkswagen Golf 8 production: Factory tour in Wolfsburg
16:25
lets discuss 1.0 TSI engine...
5:34
Просмотров 49 тыс.
Вопрос Ребром - Серго
43:16
Просмотров 1,5 млн