Voron 2.4 Step By Step Part 16 Skirts, Fans and Screen

Подписаться 4,5 тыс.

Просмотров 14 тыс.

50% 1

Voron 2.4 Step By Step Part 16 Skirts, Fans and Screen
This is the sixteenth of several videos where I will build a Voron 2.4 350 and show step by step. This step is adding skirts, fans and screen.
I just started using DaVinci Resolve so I'm a noob at it. Let me know what I'm doing right and wrong please. I want to get better at this.
My mailing address if you want to send me something cool:
Scott Corn
5411 State Route 261 #622
Newburgh, IN. 47629
A Link to all Voron information:
www.vorondesign...
I use Polymaker ASA for most of my prints. Affiliate link.
==========================================================================
us.polymaker.com?aff=345
Tools I use with affiliate links. Helps me out costs you nothing.
==========================================================================
3D Printer Nozzle Cleaner Brush amzn.to/3COSelZ
Amazon Commercial Heavy Duty Infrared Thermometer amzn.to/3X3inVH
BK Precision Multimeter amzn.to/3GfACk4
Excel Soft Grip Hobby Knife amzn.to/3WWKvK2
Hakko Wire Stripper 20-10 Gauge amzn.to/3Ck5wGW
Hakko Wire Stripper 30-20 Gauge amzn.to/3Il5bY4
Hakko FX951-66 Soldering Station amzn.to/3GELPw1
Hakko FX888D Soldering Station amzn.to/3D38gJ7 (Works with heat-set tips)
Heat-Set Insert Tips amzn.to/3G5A3sY
IWISS SN-28B Dupont Terminal Ratchet Crimper amzn.to/3iaQAnv
IWISS IWS-3220M Micro Connector Pin Crimper 32-20AWG amzn.to/3Z5wo77
IWISS Non-Insulated Terminal Crimping Tool 22-6 Gauge amzn.to/3WIhMcl
Kinex Solid Machinist Square 6 x 4 Inches amzn.to/3QffMpG
Klein Tools Twisted Pair Radial Stripper amzn.to/3jOYyD4
Klein Tools Crimping Tool Pass-Thru RJ45 Connectors amzn.to/3jDJ8l4
MOLEX Extraction Tool amzn.to/3WJsX4i
Shinwa 150mm Rigid Metric Machinist Rule amzn.to/3QaRrB0
Shinwa 1000mm Rigid Metric Machinist Rule amzn.to/3VCVYxf
Silicon Mat for Soldering amzn.to/3iUsePg (This is a very inexpensive kitchen mat that works great)
Starrett Pin Vise (Holds drill bits and reamers) amzn.to/3GEa1Pa
Super Lube 31110 Aerosol amzn.to/3WKdCk3
Tekpower Desktop DC Power Supply amzn.to/3Qdz8LJ
Uxcell Chucking Reamer Set (Cheap for plastic only) amzn.to/3WJrOK2
Weller Mini Butane Torch amzn.to/3GdqdVV
Wera Kraftform Electronics Micro Set amzn.to/3GC4Ejd
Wera Long ARM HEX Key Set amzn.to/3GcSg7Z
Wera Rapidaptor Bit-Check, 30-Piece Set amzn.to/3QakEMs
Wera Ratchet Screwdriver amzn.to/3GeJ82x

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@Daannyy9 2 года назад

I have to mention your videos helped me build my Voron2.4 350 . Very good quality, details and explanations! Great to follow along. I sincerely thank you for them.

@scottcorn 2 года назад

Great to hear! Thank you.

@mwp4600 2 года назад

Love your videos. You really need to make more. Keep up the great work.

@scottcorn 2 года назад

Thank you. I’ll try to not take so long on the next one.

@krapstarr 2 года назад

Good to see you back Scott! Been waiting for this video to drop :)

@scottcorn 2 года назад

I’ll try to make the next one sooner. Life got in the way and honestly a bit of burnout.

@scottcorn 2 года назад

And thank you

@krapstarr 2 года назад

Please take your time...burnout is a real thing and quality over quantity! Hope the new job is going well.

@scottcorn 2 года назад

The job is going well. Just a lot of work. lol

@ccamelo 2 года назад

Thanks man, I've never seen a video as complete as yours. Cheers!!

@scottcorn 2 года назад

You are welcome and thanks.

@Invaderjason123 2 года назад

Extremely helpful video series. I just printed my side skirts too!

@scottcorn 2 года назад

Thank you, glad to hear it. I'm waiting on a wire connector to make the ADXL harness for my next step. Should hopefully be here tomorrow.

@ZeonsZone 2 года назад

Great work on the build! Not sure if it missed it or not but have you been able to figure out how to program a "filament swap" function yet and possibly a command on the lcd screen to do so at a command? Ive been trying to figure it out but hit a roadblock. Keep up the great work!

@scottcorn 2 года назад

Thank you. I've not done it, but this might help you. www.reddit.com/r/VORONDesign/comments/r5wa20/filament_swap_on_voron_ignoring_m600/

@MS2Almalki 2 года назад

Love your posts.. I have project at my college to assemble voron 2.4 and I am seeking your kind support in some info: 1- From where to pay complete sit of the printer? 2- For the software, is there specific software for it or I can connect to arduino? What is the estimated time of assembling the printer because I am in Saudi Arabia and I need time for shipping plus I have to complete the project 8 weeks from now!! Thanks in advance 🖐🏻

@scottcorn 2 года назад

Thank you! All the information on this printer can be found at: www.vorondesign.com/ I've not seen the software Klipper on an Arduino. It may support it. Klipper information can be found at: www.klipper3d.org/

@dtCajun Год назад

Scott, do you still have those keystone skirts? I can't find them. The one panel that is there looks small for a 350mm Voron.

@scottcorn Год назад

I still have the STL file. The original seems to have disappeared from the Internet. I only see one sized for a 300. If you go to the about page on my channel and press the email button and send me a message and I'll send you the original stl.

@dtCajun Год назад

@@scottcorn Did you see my email?

@scottcorn Год назад

I did. I'm sending it now.

@OneLiterPeter 2 года назад

I added the USB and ethernet keystone jacks to mine as well. Hardwired ethernet is soooo nice. Had nothing but problems with WIFI and Raspberry Pi on my network.

@scottcorn 2 года назад

I'm a old school software engineer. IMHO anything that isn't mobile should hardwired. lol I already have too many IOT devices on my wifi.

@OneLiterPeter 2 года назад

@@scottcorn Yep, Agree. If I can run ethernet to something thru a cable, I do. In my house WIFI is for phones and tablets and IOT stuff. FWIW... I'm an old school ME / CAD Jockey. Hit me up on Team FDM - I'm Penatr8tor over there and am happy to help you out with any custom Voron parts you might want to create. Your videos helped me tremendously and I want to give something back if possible. Thanks for making these videos Scott.

@scottcorn 2 года назад

Sounds cool. I may take you up on that. Trying to figure out a ADXL keystone jack. I have a Molex connector arriving today that I think will fit.

@emmaRTX-x7u 2 года назад

Yah ❤ :::::: I can’t wait for the next video

@scottcorn 2 года назад

Soon, I was out in the Nevada desert for the last week plus for work. Have to get caught up on home chores and then I'll finish the next one. It's about 3/4 done.

@Da-Real-Gigachad 2 года назад

Nice, thanks for the vids bud :)

@scottcorn 2 года назад

Glad you like them!

@linuskloke6389 2 года назад

Hi, I am from Germany so not everything is perfect translated. So my question is where do you buy your voron 2.4 kit. Did your buy all parts separately or a kit and did your print your voron parts by your self or do you buy them?😅 I wanna buy the big one (350) Linus

@scottcorn 2 года назад

This one wasn't a kit. I self sourced the parts. I hear the LDO kits are of higher quality.

@TheAluminumCarpenter Год назад

Scott, where have u been? U havent been posting… will u contact me, i have a mod i would like u to try.

@scottcorn Год назад

Sorry, life has really been in the way lately. I have an input shaper video pretty much done. It will be out this weekend. I'll email you from your channel sometime today.

@2000Romu Год назад

Hi Scott. Do you have email adresse that I loups send a few questions. Love your work gonna start the same project in a few days!!! Thanks a lot !

@scottcorn Год назад

It's in the "about" -> "view email address" of my channel page. Sorry, don't want to publish it in comments and have bots pick it up. lol

@Константин-е2е5э 2 года назад

Super. very cool video👍. I also already launched my 2.4. But there are difficulties, I have VFA :(

@scottcorn 2 года назад

Thank you. You can get it, just keep going.

@Константин-е2е5э 2 года назад

@@scottcorn Hello. Here is my voron ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1yL2c_Z9z3E.html. Thank you so much for your videos. I used them as a manual, everything is very cool!!!

@Ahmed-ic9ft 2 года назад

LESSSSGOOOO WE BACK

@scottcorn 2 года назад

Thank you.

@petarbajai 2 года назад

I curious how you are going to auto update the mcu i have been looking for some info but cant find it

@scottcorn 2 года назад

I've not fully researched this yet. It may just allow the creation of the firmware and not installation. Don't know yet. docs.vorondesign.com/community/howto/drachenkatze/automating_klipper_mcu_updates.html

@petarbajai 2 года назад

@@scottcorn ratos (ratrig core 3) does have auto updates for the mcu. i have the core 3.1 and the minion

@scottcorn 2 года назад

Hopefully it can be done with an Octopus board. That link doesn't look to show this at first pass. I think just auto generation of the proper file and renaming of the file. I still haven't researched it so I may be wrong.

@emmaRTX-x7u 2 года назад

I’m planing to do it too

@scottcorn 2 года назад

They are fun to do.

@MrHeksas 2 года назад

Thank you so much for this video series

@scottcorn 2 года назад

My pleasure! I'm sitting here working/editing the next one right now.

@linuskloke6389 2 года назад

And I love the videos😁👍🏽

@scottcorn 2 года назад

Thank you!

@greliusz 2 года назад

This board has the ability to run two fans without connecting two cables, connecting to two slots, for example: [controller_fan controller_fan] ## Controller fan - FAN2 pin: PD12 kick_start_time: 0.5 heater: heater_bed [controller_fan controller_fan2] ## Controller fan - FAN3 pin: PD13 kick_start_time: 0.5 heater: heater_bed

@scottcorn 2 года назад

You are correct. Thanks for the tip. I try to keep things as close to the manual as I can to so i don't confuse people. The stock printer.cfg file only has the one controller_fan entry so I went that way. Depending on how things cool I may move one of the fans to the other side and have it blow out. I may not need to though. The only thing that was getting too warm without fans was the PI.

@greliusz 2 года назад

@@scottcorn That's right, you can work with one or two fans, for silence you can configure it. I did so, because I did not want to cut the cable, because I felt sorry for having fun with soldering. An interesting fact, on the manual from BTT Octopus they say clearly that you can connect up to 8 fans. And in the instructions from Voron (and fully upgraded) we see that 5 fans are connected, so you have 3 free slots to connect. So you only complain that PI heats up, you can also configure the klipper to take the results from the temperature sensor from the RPi plate, connect a small fan to PI and, for example, set: [temperature_fan board_fans] pin: PD15 kick_start_time: 0.8 #shutdown_speed: 0 off_below: 0.1 max_power: 1.0 #fan_speed: 0.6 sensor_type: temperature_host control: pid min_temp: -40 max_temp: 85 #max_delta: 5.0 pid_kp: 1.0 pid_ki: 0.5 And it will only auto-cool the PI.

@maxdolski904 Год назад

WOAH WOAH WOAH YOU SKipped the installation of the z belt cover :(( Great video(s) though

@martincastellano89 2 года назад

could u add the ebb36 canbus with the octopus and show us??

@scottcorn Год назад

I wouldn't mind it. I'll have to see about the time to do it. I keep hoping I have more time as the warm weather winds down. I've got a video about 3/4 done that has been sitting for about a month. Work is taking up too much of my time. lol I actually had to print some parts for work for the first time last weekend.