support.micros...
How to configure an L2TP/IPsec server behind a NAT-T device in Windows Vista and in Windows Server 2008
INTRODUCTION
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 How to back up and restore the registry in Windows
By default, Windows Vista and the Windows Server 2008 operating system do not support Internet Protocol security (IPsec) network address translation (NAT) Traversal (NAT-T) security associations to servers that are located behind a NAT device. Therefore, if the virtual private network (VPN) server is behind a NAT device, a Windows Vista-based VPN client computer or a Windows Server 2008-based VPN client computer cannot make a Layer Two Tunneling Protocol (L2TP)/IPsec connection to the VPN server. This scenario includes VPN servers that are running Windows Server 2008 and Microsoft Windows Server 2003.
Because of the way in which NAT devices translate network traffic, you may experience unexpected results when you put a server behind a NAT device and then use an IPsec NAT-T environment. Therefore, if you must have IPsec for communication, we recommend that you use public IP addresses for all servers that you can connect to from the Internet. However, if you have to put a server behind a NAT device and then use an IPsec NAT-T environment, you can enable communication by changing a registry value on the VPN client computer and the VPN server.
To create and configure the AssumeUDPEncapsulationContextOnSendRule registry value, follow these steps:
1. Log on to the Windows Vista client computer as a user who is a member of the Administrators group.
2. Click Start

3. , point to All Programs, click Accessories, click Run, type regedit, and then click OK. If the User Account Control dialog box is displayed on the screen and prompts you to elevate your administrator token, click Continue.
4. Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PolicyAgentNote You can also apply the AssumeUDPEncapsulationContextOnSendRule DWORD value to a Microsoft Windows XP Service Pack 2 (SP2)-based VPN client computer. To do this, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\IPSec
5. On the Edit menu, point to New, and then click DWORD (32-bit) Value.
6. Type AssumeUDPEncapsulationContextOnSendRule, and then press ENTER.
7. Right-click AssumeUDPEncapsulationContextOnSendRule, and then click Modify.
8. In the Value Data box, type one of the following values:
* 0
* A value of 0 (zero) configures Windows so that it cannot establish security associations with servers that are located behind NAT devices. This is the default value.
* 1
* A value of 1 configures Windows so that it can establish security associations with servers that are located behind NAT devices.
* 2
* A value of 2 configures Windows so that it can establish security associations when both the server and the Windows Vista-based or Windows Server 2008-based VPN client computer are behind NAT devices.
*
9. Click OK, and then exit Registry Editor.
10. Restart the computer.
More Information
For more information, click the following article numbers to view the articles in the Microsoft Knowledge Base:
818043 L2TP/IPsec NAT-T update for Windows XP and Windows 2000
885348 IPSec NAT-T is not recommended for Windows Server 2003 computers that are behind network address translators
8 сен 2024