VW T25 T3 Vanagon Power steering conversion Pt 1

Подписаться 25 тыс.

Просмотров 23 тыс.

50% 1

How to install electric power steering to your VW T25 T3 Vanagon or caravelle. Campy the camper gets the mechanical upgrade in this video and the electrical install and new Mountney wood rim wheel in part 2. For more details on this and other projects visit
www.tothegarage.co.uk
Links to products in the video are:-
POWER STEERING KIT
rover.ebay.com/rover/1/710-53...
WOODEN STEERING WHEEL AND BOSS KIT rover.ebay.com/rover/1/710-53...
BATTERY QUICK RELEASE
www.amazon.co.uk/MOTOPOWER-MP...
“When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.” I also earn from the Amazon affilliate network when you make qualifying purchases. Using these links does not increase the price that you pay.

Авто/Мото

Опубликовано:

28 май 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@petersullivan3012 5 лет назад

I have to admit I didn't fit my conversion myself, but it makes driving the van a completely different experience, parking is a doddle and my wife struggled driving it before but can now drive with no problems. Highly recommended bit of kit!

@ToTheGarage 5 лет назад

Thanks for watching Peter.👍

@Paul_VanGo 5 лет назад

One might respect that 'odd' coupling when in an accident and the steering shaft decouples, preventing you get a deadly uppercut from the steeringwheel. Since that's what it is for. ...which is now absent, I might add...

@ToTheGarage 5 лет назад

Good point well made Paul👏

@Galphs 6 лет назад

I have one of these kits on my Christmas list. It looks relatively easy to install although most jobs on my van require a large hammer, blow torch, reciprocating saw and some profanity!

@ToTheGarage 6 лет назад

Hi Steven. If you have such high tech toys as a reciprocating saw (tool envy) then I am certain you would find this a breeze. You might need a hammer to get them pesky anti tamper bolts off that hold up the old column though! You have made me start to consider what should be on my list to santa this year🤔

@Galphs 5 лет назад

@@ToTheGarage With the help of your video, I got the kit installed in just under 3 hours. The difference is amazing! The first of many upgrades to the van this year.

@ToTheGarage 5 лет назад

@@Galphs Fantastic News Steven and congratulations on the install time. Obviously making the video increases the time to fit substantially. However, Im convinced that you would have beat me by at least 2 hours. Good work sir. I set mine for the higher level of assistance I take it you did the same. I could not get my hat on re the level of assistance provided either. Its a real game changer of a modification.

@JamesAkers 6 лет назад

Great video, thanks for sharing!

@ToTheGarage 4 года назад

Thanks James

@chimpmoon1856 5 лет назад

Excellent videos, I`ve bought one of these kits not long ago, and your video has made it very clear what to do, thanks. I`ve got the one you have to weld, so will post on how easy that is, I`m not a professional welder but have learned much, as my van looked deceptively good when bought :)... Cheers...

@ToTheGarage 4 года назад

we all learn to weld when the VW van bug strikes!

@ToTheGarage 6 лет назад

No Problem James. I am loving your site too. (I am a subscriber)

@floringhetu4005 11 месяцев назад

Nice work very detailed instructions. Do you wire the eps to the main or the leisure battery?

@speedboatbuilder 5 лет назад

Hi, just letting you know that I bought the same kit from tecscan on ebay. The welding was done very very badly. I took the outer shroud off to inspect the weld on the actual shaft itself, as I had a strange feeling about it and I was shocked. Really really bad welding and pinned with a nail. Yes, a nail. Still had the head on the nail. I ground off the bad welds and redid it myself. I'm replacing the nail with a roll pin and doing 2 extra plug welds. Scary to think how many people could be driving around with tecscan's dodgy columns... just though I would give this warning, as some people might buy from tecscan because you mention it in your video. Also, I would strongly suggest you take yours out, cut the welds on the outer column tube so you can inspect the weld inside. All the best....David

@ToTheGarage 4 года назад

Thanks for the intel

@tonysummers9875 4 дня назад

Hi could you help me out where get your power steering kit from as I need to fit one on my t 25 so the wife will be able to drive her it quite a unusual one it's always owned by three Gloucestershire people my nabour was the very first one to drive it and take to a local garage can't wait to here from you. Thank You Tony & Sandra Summers

@ToTheGarage 2 дня назад

Hard to get the exact same unit as mine now. Have a look at this one though www.ebay.co.uk/itm/223620251896

@ataykivrikoglu 4 года назад

Hello friend, congratulations, it looks very nice. I have a question, have you changed the position of the fuse box? because the electric motor is right there.

@ToTheGarage 4 года назад

Hi Atay. The fuse box is on the left behind the glove box. Is yours left hand drive?

@ataykivrikoglu 4 года назад

@@ToTheGarage Oh yes my car is left hand drive. Thank you, I will continue writing if I have any other questions.

@philomenagoodman1803 2 года назад

The original , cranked lower column is a safety device. It allows the column to collapse rather that end up in your chest. Remove this at your peril. Legally you are reducing the front impact protection designed in my VW that formed part of the vehicles safety approval. As the steering components are close behind the front bumper on this rear engined vehicle this is even more important that on many cars with a long bonnet and a steering rack on the bulkhead. Just my thoughts.

@ToTheGarage 2 года назад

Good Intel, thank you Philomena goodman

@sueball3421 4 года назад

Any links to where I could buy this conversion kit as in looking to do just this to my T25 thanks in advance

@ToTheGarage 4 года назад

Try this link Sue Not the same supplier as i used (dissapeared!) but appears to be the same kit www.ebay.co.uk/itm/VW-T25-T3-Vanagon-Power-steering-PAS-Conversion-Kit-RHD-PRE-ORDER-/223620251896

@kavehaha 5 лет назад

Greetings I'm based in Namibia and I'm interested in the product. How will get it delivered here? Regards Boetie

@ToTheGarage 5 лет назад

Hi Boetie. You would need to contact the suppliers that I provided links for in the description. They may be able to get the products to you. Obviously, the delivery cost may be considerable given the weight of the product and the distance involved.. Good luck with that my friend👍

@carlpinchen5058 4 года назад

Hi there, how much would power steering cost if you were to get it done at a garage? I’m looking to buy a t25 and this would be one of my first additions to it. Thanks

@ToTheGarage 4 года назад

Hi Carl. Here is a link to one outfit offering a fully installed kit for £550 ultimate-engineering.co.uk/powersteering.html No idea if that are good or bad. You would have to check that out for yourself. Thanks for watching and I hope you find your dream Bus.👍