No video :(

VW T5 / T6 U-shape (Rear Lounge) Camper Interior Installation: Part 1 (Cabinets and electrics)

Подписаться 2,6 тыс.

Просмотров 4,5 тыс.

50% 1

In this next video in our camper van conversion series, we discuss preparing units for installation and pre-installing electrics. We also discuss some of the challenges associated with the U-shape configuration and how we have overcome them through careful planning. A really useful video if you’re currently thinking about converting a T5/T6 van or similar.
Please note that our units were supplied by Van Furniture and our electrics were supplied by Rayne Automotive. These were purchased at full price by us and are not sponsored in any way.
We’d very much recommend Rayne Automotive and Van Furniture who have been great to deal with.
The Rayne electrical system we purchased made installation so easy and the guys there have been fantastic in terms of their advice and support. A real credit to the camper van industry! Superb.
Van Furniture also deliver a great product that is extremely robust. So robust that we have actually chosen to lighten it in some areas. Again, a firm that delivers a great service. many thanks.

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@libasaurusrex 29 дней назад

I'm looking at buying the same furniture kit in the future. Thanks for this video - some great ideas and things to think about.

@highergroundlifestyle 29 дней назад

Glad it helped! Best of luck. N

@mdoignie 6 месяцев назад

great job and has given my some good ideas as im just in the middle of my electric s at mo. love the idea of the gas cartridge which save space and weight. keep it up......👍

@highergroundlifestyle 6 месяцев назад

Thanks for your positive comment. Best wishes. N

@LasseHuhtala 2 года назад

Good job Norm. Will be interesting to see the in-car build.

@highergroundlifestyle 2 года назад

Cheers Lasse! Van should be back from paint next week so we can progress then. Excited to see the paint job. Stay safe my friend. N

@nilsjohnsen7515 2 года назад

Amazing😁👍 Keep it coming

@highergroundlifestyle 2 года назад

Cheers!

@stevemanners7275 Год назад

Hi Norm, how are the gas cylinders working for you? Did you still have to put a floor vent in? Great video btw.

@highergroundlifestyle Год назад

Thanks Steve! The cylinders work great. Small, light and easy to carry spares - although we only used two during a full week away - so you don’t need that many. I didn’t fit a floor vent as the volume of gas in each is so low and you switch them off at the cylinder after each use. We do have a gas and a CO alarm however. Cheers. N

@gauthierblanpain773 Год назад

Hi Norm, I ordered the cadac regulator as per your recommendation. However, I’m struggling to make the connection from the quick connect (left hand thread) to the 8mm copper that attaches to the hob. Any help would greatly appreciated. Thanks

@highergroundlifestyle Год назад

It seems extreme but I cut off the threaded connector and pushed the rubber tube on to the copper pipe and secured with a jubilee clip. Sorry, I should have made that clear before. Let me know once you’ve got it up and running. Best wishes. N

@gauthierblanpain773 Год назад

@@highergroundlifestyle I thought that might be the case after trying to zoom in on your video. That’s no problem, I’ll add a compression between the pipe and the hose just to be extra safe. Thanks again for getting back to me. Your videos have been very helpful and one of the deciding factors in us also going for the u bed setup 👍

@highergroundlifestyle Год назад

@@gauthierblanpain773, many thanks. The u-shape works for us! I have a few more videos still to edit of our trip last Summer that will hopefully show it in use. Stay safe and enjoy the van. N

@eileenm5386 2 года назад

Hello, I'm thinking of getting this same conversion for my van. Where did you get the removable table? Did you specifically request not to get the folding table instead?

@highergroundlifestyle 2 года назад

Hi. The table was supplied by the same people who supplied the U-shape and cushions, Van Furniture. I asked for a free standing table instead of the wall mount as I think it’s a more sociable layout. The table is in oak and matches the optional oak work surface. There are two types of table mount, flush and “mushroom” (raised). The flush mount is neater but requires a hole in the floor. I went for this. Best of luck. N

@gauthierblanpain773 Год назад

Hi, which regulator are using with the canisters? And where do you get the canisters from? Thanks

@highergroundlifestyle Год назад

Hi, I’m using the cadac regulator. It’s designed to allow you to use screw in cartridges for their garden BBQ’s but works great. No regrets using the cartridges as they’re small, light, much safer and easier to carry. I tend to order on line as it’s cheaper but you can also get from any camping shop. Cheers. N

@gauthierblanpain773 Год назад

Amazing. Thanks for the quick reply 👍