VW Volkswagen Skoda Seat Broken Key HOW TO Fix Snapped Blade

Подписаться 38 тыс.

Просмотров 855 тыс.

50% 1

This video has been a long time coming! We promised it over a year ago. This will show you how to repair broken VW, Seat and Skoda keys that break. The blade holder snaps and the key falls out.
You can buy everything you need by clicking the links below
To buy a new 2 button repair kit from Amazon click here amzn.to/36R6WIk
Or, you can order direct from our website by clicking the following link thecarkeyman.c...
To buy a 3 button case click here amzn.to/2IQzN7x
Or, you can order direct from our website by clicking the following link thecarkeyman.c...
To buy the key opening pliers click here amzn.to/2ZvvSzl
To buy a new key battery click here amzn.to/2LF0HOB
This needs a new case and you need to be very careful when you break open an old VW, Seat or Skoda broken key. If you have any questions please ask in the comments below.
Thanks for watching
Affiliate Disclaimer
Links on this website may lead you to a product or service. They provide an affiliate commission to the owners of this site should you make a purchase. In no way does any affiliate relationship ever factor into a recommendation. Nor does it alter the integrity of the information we provide.
Please note that we have not been given any free products, services, or anything else by these companies in exchange for mentioning them on the site. The only consideration is in the form of affiliate commissions.

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 351

@ceruscocr7825 8 месяцев назад

Thanks for the video, the real issue is the abusive and outregeaus prices these companies charge for a stupid replacement.

@TheCarKeyMan 8 месяцев назад

Yep, well said

@joshholmes1287 Год назад

Great video

@TheCarKeyMan Год назад

Thansk Josh, really pleased it helped :)

@abhineet_17 6 месяцев назад

Is there any alternative for pin removed tool?

@TheCarKeyMan 6 месяцев назад

Hi, well it needs to be something strong and below 1.4mm in diameter

@jasonplugowsky3086 Месяц назад

@@TheCarKeyMan I can't even find a punch that small. I hate VW with a passion. I thought the triple square drive was bad.

@tamelablake1401 3 месяца назад

It worked!!! Thank you so much for the video. The instructions were great and we were even able to get our old blade to work with a little bit of filing on the end to get it to fit. Cost us 7 dollars to fix! THANKS!!!

@TheCarKeyMan 3 месяца назад

That’s great news! Thanks for the feedback :)

@karlitosway441 2 месяца назад

Thank you very much for the instructions and the extremely clear way you put it across.. fixed my key for £12:99. Really appreciate it.

@griffog2001 7 месяцев назад

Can you just swap the entire old blade and holder over if you're just replacing a worn housing?

@TheCarKeyMan 7 месяцев назад

Hi, unfortunately the old blade holdr is built differently to the new one so will not work correctly in the new case

@griffog2001 7 месяцев назад

@@TheCarKeyMan I was lucky then. I’ve just done this as the buttons on my old remote were very hard to press. Swapped old blade over and all working.

@paulsmith6343 6 месяцев назад

Can you get just a replacement pin for the blade holder? For some reason it has come out of my key. The blade holder and blade itself look undamaged. Can't understand how that could happen but that's how it looks

@tomasznantka2030 4 года назад

Thank you very much for such a detailed course including those tiny but crutial pieces of information. I really appreciate it. Greetings from Poland! :)

@jonathanh8845 8 месяцев назад

Absolute genius! Found this video from a comment on AZ product B0B5DLHQP1 which also seemed to fit my old blade without any filing. Nice! Thanks again.

@TheCarKeyMan 7 месяцев назад

Great stuff, really pleased it helped :)

@Sprutolog 6 месяцев назад

No need to break the case, you need just to grind/cut 1 mm plastic around the locking pin and pull it out with small tweezers.

@OuttaHere7 3 года назад

Any idea where I can get the VW badge for the key fob? What do they call it? Thanks for your excellent instruction sir.

@TheCarKeyMan 3 года назад

Hi Paul, are you in the UK?

@dgirllamius____x Год назад

I bought a new housing for my key but of course the blade doesn't fit. Can I go to a regular locksmith and habe the new blade cut or does a dealership need to do it? I was by VW and they said I need a whole new key and they won't cut the blade that came with the new housing.

@TheCarKeyMan Год назад

HI, ok so the dealership cannot cut it. I would recommend going to a local key cutting shop and see if they will.

@alexwelle3816 Год назад

Best protocol on YT for this issue. Shown by a professional. Thanks mate!

@landonmosley3238 Год назад

I’m trying to get the pin out with a 1.5 punch. It seems like like I can’t push it out any further.. any tips?

@TheCarKeyMan Год назад

Well the punch I use is 1.4mm, maybe that's enough to make it too big. Sometimes if you turn the key over and try and push it from the other side it helps

@ravib2303 Год назад

Same problem here in India...I am facing with broken key....It seams hard to fix so I went to a key maker... He took 6$ for shell and 3$ to repalce it....job done in 10 minutes...I paid 900Rs.

@TheCarKeyMan Год назад

So did he fix it well? Did you save money? Not sure how much 900R's is , sorry

@allanmason3201 3 года назад

Thanks for the video. It helped me with replacing the fob for the key to my 2002 Skoda Octavia. My problem was that the metal loop at the end opposite the blade had broken off so I couldn't put the fob on a keyring, so I just swapped blade and circuit board. However, the immobiliser then stopped the engine from running. After quite a bit of Googling, I discovered that the RFID chip that the immobiliser system uses is in a tiny glass tube that's glued deep in a little recess right next to the blade pivot. Once I'd managed to extract the tube and get it glued securely in the new fob, the key worked perfectly.

@TheCarKeyMan 3 года назад

Glad it helped Allan :)

@bernardmichaud1099 7 месяцев назад

I did this exact procedure on my fob for a 2012 VW Golf. In the video at time stamp 6:08 when I removed the circuit board, the gold looking switch got separated from the board and was stuck to the flexible rubber part of the keyboard. It may have bee intentionally glued by VW, I don't know for shure. I managed to remove it from the rubber part and re-glued it with a very thin layer of instant glue taking care to place it to meet the section on the circuit board and luckily it worked. If not, I would not the unlock function on the fob would not function. So beware.

@TheCarKeyMan 7 месяцев назад

Hi, thanks for this advice. Yes I'm starting to see this a bit now. They are not glued, but ust become attached overtime I believe. It can just be placed back onto the switch and with a bit of carefull assembly it will still work ;)

@73squirrel Год назад

Thank you, my blade holder snapped and I was quoted £160 for a new key. Bought a case and pliers off a well known internet retailer for £13 and spent 45 minutes to swap over the original key blade into the new case. Used a sharpening stone to file a tiny bit off the blade so it fitted the new case. This video was invaluable in saving me time and money.

@slots-bj9do Месяц назад

I just wanted to say thank you i followed your steps and it worked i am a woman that usually don't do things like this and they come across your video i just really wanna say thank you you save me time and money

@TheCarKeyMan Месяц назад

You’re very welcome, good to hear it all went well :)

@ashkat4392 9 месяцев назад

Question.. So it doesn't have to be programmed?

@TheCarKeyMan 9 месяцев назад

No, because the important part of the key, the circuot board is transferred over to the new case

@adambentley4334 8 месяцев назад

thanks for this video. Managed to do re-shell my wife's Skoda key following your guide. Biggest issue was finding someone to cut the new blade (only) as i already had the shell. None of the chains will do it so ended up at a local locksmith. I had tried to knock the pin out to swap the blades but gave up after a while (must need a hell of a lot of force!). Worth the effort in the end. About £35 all in including £10 for a 12mm OEM Skoda logo. Still half the price Timpson wanted to charge... and i learnt something. Thank you.

@TheCarKeyMan 8 месяцев назад

Well done Adaam, you needed a small pin punch to get the pin out. Glad it's all sorted :)

@Denver1976Man Год назад

Hi am going to fix my friends 2007 Jetta wolfsburg. 1 question. Where is the immobilizer chip? Is it on the circuit board? If I get the key cut with the kit and just swap the circuit board it will work?

@TheCarKeyMan Год назад

Hi, no the chip should be a small glass tube, near the key blade. Be careful swapping this as if the glass breaks, the car will not start. I sometimes melt the plastic around the chip to ease it out slowly, using a soldering iron.

@Denver1976Man Год назад

@@TheCarKeyMan Thank you. Is there something that could dissolve the glue or make it soft besides heating? I would be afraid of hurting it with heat. This poor girl is being told so much garbage about her ignition switch. Her cylinder is locked up. Which I can fix. They want her to buy a whole column and prob end up with the same problem in short time. Then program the key for 100 bucks. I told her the original is always best because of the doors, trunk ect. So anyway. I am sending her your video to show her it is possible and a lot less expensive. Thank you again. Lol, I am used to hondas doing this. have done a few. Which helps. These Volkswagens are a little different.

@kellydgz5227 Год назад

Where do you take the new key to get cut to match old if you can’t file down

@TheCarKeyMan 11 месяцев назад

Hi Kelly, a good key cutting shop should do that for you :)

@BobBob30966 29 дней назад

Saved the day bro, maybe even my marriage lol. Followed your directions to a T and everything went smooth as could be. Instead of getting a new key cut I removed the blank key and filed down original key and it works great. Thank you!

@TheCarKeyMan 28 дней назад

Great stuff, always pleased to save a marriage 😉

@yungkurkotsgafftrooper9291 19 дней назад

I just broke mine 2min ago😢😢😢😢😢

@yungkurkotsgafftrooper9291 19 дней назад

I broke the blade holder

@timstaten1124 Год назад

Will the car start If the keys dissembled from the fob?

@TheCarKeyMan Год назад

Yes, if you can still tutn the key with the fob, it will start

@markyruss 5 месяцев назад

Just wanted to say big thank you. I ordered the key off eBay for £10 and I swapped over the bits and I just filed it down and it fit.. I used the silver pin and a hammer to knock out the key blade it fits perfectly

@TheCarKeyMan 5 месяцев назад

Great stuff, that’s a good result. Appreciate the feedback :)

@MrCaCoche 3 месяца назад

Hey there, Just wondering if this is the key fob for VW Jetta I have a 2014? It looks like the same, but I've already ordered the wrong one a few times, so just want to make sure.

@user-hs2ld8hy5h 3 года назад

Привет ! Педите свой расказ про ключь на русский язык

@TheCarKeyMan 3 года назад

Извини, я не говорю на твоем чудесном языке ;(

@roystonroberts1573 15 дней назад

Thank you so much for this clear and helpful guide. Without your help, I would have definitely mess it up.

@robinduckett9572 Месяц назад

Very very helpful. I found a neater way to remove the pin though, than breaking: two small drill holes either side using a dremmel, then a fine set of pliers to pull the pin.

@zarkoboyadjiev3061 3 года назад

I know this is a video tutorial but you kinda forgot the battery. It`s clearly at 7:47. P.S. Great video.

@TheCarKeyMan 3 года назад

Did I? Oh blimey, that won't work then ! Thanks for pointing it out

@pmas27 Год назад

Forgot to show Skoda badge removal without damaging it and what to stick it on with, excellent video though

@TheCarKeyMan Год назад

Hi, I normally melt the edge around the badge with a soldering iron, then gently lever up the badge

@Flex385 Год назад

Used a hair dryer

@aaronnissen7155 4 года назад

That was perfek. Thanks a lot ! All Best from Germany where i could not find a detailt cours

@TheCarKeyMan 4 года назад

Well done fixing it, really glad it helped :)

@hellfire447 3 года назад

Thank you for the detailed explanations. I wanted to ask how I would go about getting the key cut? I have no experience with this, and I don't have anyone to ask. If you were to go get they key cut, what would you do? Thanks for your time.

@TheCarKeyMan 3 года назад

Hi Jesse. Ok, so before you buy anything, do a search for 'Auto Locksmith' in your area. Or ask at your local repair garage if they have a number of a shop or mobile key service that could help.

@pricejames500 Год назад

Unfortunately, before I found your video, I was following another video on utube. On the other video, the instruction was to knock the pin through I don't think I knocked the pin all the way through but am not going to know for certain until I receive my new case and try to start the car. If by chance I've damaged the circuit board, what are my options? Warm regards James Price

@TheCarKeyMan Год назад

Hi James, sorry for the delay. Well you'll not know until you know. If it has damaged it, then you'll need a new key unfortunately. Do you have a second key?

@karlossmith3714 3 года назад

Maybe a silly question.. but say for example I decide to get a new key and take apart my spare key..will my original key always work lol.. if I ruin the spare there’s no reason why my other key wouldn’t work right?

@TheCarKeyMan 3 года назад

Hi Karlos, not a silly question, so here goes. Think of it like this. Each key has a chip in that acts like a unique fingerprint. In the car is a library of all the keys that are allowed to start it, like a list of allowed fingerprints. If you mess one key up, the other will still be stored in the library and it will work fine till. Hope that helps

@karlossmith3714 3 года назад

@@TheCarKeyMan perfect..thank you

@karlossmith3714 3 года назад

@@TheCarKeyMan done.. works perfect. Thank You 👍🏻

@iliaszaagougui5035 3 года назад

Just replaced the chip and had it cut out. All under 20 euro's. Love it

@TheCarKeyMan 3 года назад

Well done :)

@xxkaykittyxx Год назад

I have been using my broken key by just inserting the key and then the old remote in it, is it possible that I bent my key or something? I can’t even get the switch on anymore? Help. 😭

@TheCarKeyMan Год назад

Hi Kari, does it stil start the vehicle ?

@gitmoholliday5764 4 года назад

why not glue back that broken blade in its original place ?

@TheCarKeyMan 4 года назад

Hi, good question. It won't last. We see this a lot and the turning motion of the ignition means that there's too much pressure on the glue.

@koushikbingi Месяц назад

I tried and damaged my key. Sadly car not starting and showing safe in cluster. How much it's going to cost? Please help

@TheCarKeyMan Месяц назад

Hi, you”ll need a local Auto locksmith to sort it for you. Sorry to hear this. Did you open it with the circlip pliers?

@TheBlueFalcon337 5 месяцев назад

Thank you! It worked perfectly, except it took me 3 or 4 tines to get the key springy but I got it. 😁

@TheCarKeyMan 5 месяцев назад

Yes a bit tricky, you need three hands, but glad you got it done :)

@elliegraham1845 4 года назад

The 3 button case is unfortunately unavailable on amazon using the link. Does anyone know the product code or somewhere else I can find one? Thanks

@TheCarKeyMan 4 года назад

Hi Ellie, yes sorry there is a problem sending in stock to Amazon. I'll try and post a link to a different one for you

@elliegraham1845 4 года назад

@@TheCarKeyMan thank you so much, sorry, I didn't see the reply until now

@GeorgiHadzhiev-rw2hg 4 месяца назад

the key case looks a little bit different on my VW , does it matter or the one in your description will still work out? I have golf 7 2013

@TheCarKeyMan 4 месяца назад

Hi, is your key bigger? You may have the new style, in which case, no it will not be compatible

@TECHNO_TURK 2 года назад

why are they design something that has to be brake when opening, please car companys fire these designers !!!!!!!!!

@TheCarKeyMan 2 года назад

Yes, pretty poor, I agree

@TheElectricianOnHisMission Год назад

@@TheCarKeyMan Hi I have a 2013 Volkswagen Pasaat SE and my key broke off. Where can I find a replacement key from, and would I need to install the old key into the new button key?

@nigelallen9238 6 месяцев назад

Excellent video. Very easy to follow instructions and a new key successfully built for my van for a fraction of the price that VW wanted. Many thanks for showing us all how to do it.

@TheCarKeyMan 6 месяцев назад

Well done, really pleased it helped :)

@RussellHolborough Год назад

Hi, Great video. Can you tell me the size of the punch you used to get the pin out of the key? Thanks

@TheCarKeyMan Год назад

Hi, less than 1.4mm

@BellaAutosLtd2023 8 месяцев назад

You are a life saver! Followed each step after order a replacement key (£5 off eBay) and jobs a good un! Thank you! Very Professional!

@TheCarKeyMan 8 месяцев назад

Well done Mark, glad it helped you :)

@claudiupap3903 Год назад

There is a better way to take out those two pins.I drilled a small hole and then used a flat thin screw driver and push them out.Its better than breaking the pin holder.This way the key remains intact.I cannot post a picture here but you can DM me an i will email you the better workaround. 🙂

@TheCarKeyMan Год назад

So do you reuse the old case? how do you get the old blade held into the broken blade holder?

@claudiupap3903 Год назад

@@TheCarKeyMan I changed the case completely, but i managed to open the case to take out the electronics without effort, by drilling a really small hole

@luisdelavega7504 2 года назад

Thanks very much from LA, CA very helpful video it worked for my 2012 Jetta and it saved me lots of money form going to the dealer

@TheCarKeyMan 2 года назад

You're welcome Luis, glad it helped you and hope life is good in LA

@bigboi9611 Год назад

5 mins of filing with me leatherman and the old key fit no problem

@TheCarKeyMan Год назад

Nice! Handy tool to have ;)

@shinnyram3035 2 года назад

Helpful video thanks! Would you happen to know the size of the punch or have link to the one you used to knock the pin out to switch the key blade?

@TheCarKeyMan 2 года назад

Hi, a 1.4mm punch will work fine

@nordemoniac 3 года назад

I bought a Chinese key shell replacement, but it was assembled, with PCB and battery, everything. I assume it won't work or have to be programmed, so I guess I'll have to knock that pin through...

@TheCarKeyMan 3 года назад

Hi Glenn, yes you'll need to swap your circuit board nto the new case. Make sure you use Circlip pliers to open the case!

@nordemoniac 3 года назад

@@TheCarKeyMan Actually after messing with it for a while, the pin in it came out. I could the open it with those pliers. I had a tough time getting the key blade to fit the new mount (which I had to use, the button was a different diameter). But some filing and it did fit. I used the pin from the cracked open old case, as it was slightly larger, and was able to secure the new shell. Unfortunately there seems to be a bit different “click” with the old PCB in the new shell, it’s not as clicky as it was before, but it works, and looks a whole lot better.

@Lilhen123 4 года назад

This just happened to me. So I come to RU-vid to help me.

@TheCarKeyMan 4 года назад

Hi Lili, just be careful when opening the old case, use Circlip pliers and you'll be fine.

@stefordmackay5609 2 года назад

Golf 6 key

@TheCarKeyMan 2 года назад

Have you got a problem with yours?

@Re3Ns 2 года назад

I have a Seat Leon with exact same key fob. The key is slightly loose but the main problem I have, is that it discharges any battery I put in it within 3-4 days. I've gone through 6 batteries already, so I'm hoping I can use this video to take it apart, clean the fob (it's DIRTY) then put it back together with a new battery.

@TheCarKeyMan 2 года назад

I expect the key has got wet in the past, you'd be better off getting a spare before you take it apart

@Re3Ns 2 года назад

@@TheCarKeyManWould you mind giving a link where I can buy this model of key fob please?

@leojsantos1886 11 месяцев назад

Its so funny that we have the same fucking key

@BikeMates 3 года назад

I had a broken key on a seat Ibiza and managed to glue it back together with araldite and it works great 👍

@TheCarKeyMan 3 года назад

Good DIY, just mind the blade doesn't come loose and get lost, we see this a lot!

@MatzFilm 2 года назад

So once you do that you don’t need to reprogram the key fob? Thanks

@TheCarKeyMan 2 года назад

Not usually

10 месяцев назад

My key is not broken but came apart after the pin that holds the key to the fob came out. Can I get that one pin somewhere?

@TheCarKeyMan 10 месяцев назад

Hi Sofia, on eBay I expect. They don't normally fall out unless there is a hairline crack in the key holder

@Jcslim138 2 года назад

Of course my key doesn’t fit in the donor 🤦🏽‍♂️

@TheCarKeyMan 2 года назад

Hi, yes you'll need to alter the tang with a file if you want to reuse your blade.

@Jcslim138 2 года назад

@@TheCarKeyMan that’s what I ended up doing. I took a electric nail filer and shaved the whole end Length and width wise until it fit snug.

@matjazselic4733 Месяц назад

Thank you. The key works perfectly.

@TheCarKeyMan Месяц назад

Excellent, thanks for the feedback

@utekopka7920 4 месяца назад

Thank you so much for this very useful video which has helped me to repair my broken Volkswagen key. I have watched several videos on this topic and yours is the best by far. Your video has been the only one that has shown how to open the new case and how to safely open the old key. You have saved me a lot of money: the new case was only 9.95 Euros. Again, thank you a lot!

@rickardwallin6573 Год назад

What is the little pin called that you knock out at the end. Mine flew out when I click the key button

@TheCarKeyMan Год назад

Hi, it's just a pin, not sure of the name to be honest. If your pin has fallen out, but the blade is stil in the key, it maybe that you have a hairline crack around the area of the hole. When this happens, the hole widens and the pin falls out

@q7frkzq7frkz14 7 месяцев назад

XD yes since tonight this is how I use my key 🤣🤣

@TheCarKeyMan 7 месяцев назад

Oh dear! Make sure you don't lose the blade!

@steveellison7537 4 месяца назад

Very useful video, key repaired much cheaper than VW or even an aftermarket key supplier

@daveychainsaw961 Год назад

Thanks for this video. Ordered a replacement key body from you and just rebuilt my key. used a combination of a belt/disc sander and a file to shorten the key blade and didn't have to file a new groove. Works brilliantly. Only bit of info i would add is to make sure you wind the blade holder round so that you tension the spring enough so it pops out like the original. Test it before you tap in the locking rod.

@TheCarKeyMan Год назад

Hi Davey, thanks for this info, yes it will certainly help others. Thanks for leaving the feedback :)

@reinholdraabe8430 Год назад

Thank you for the video. I was also able to fit the old key after I made it shorter and thinner using a grinder.

@ElijahMCbeats Год назад

It worked for me. Thanks. Went to timpsons who told me they would charge me £15 to cut the key part. With no guarantee it would work and no replacement. But gladly it did work. When i confirmed the key worked. Popped the fob out just like shown here. No problems.

@TheCarKeyMan 11 месяцев назад

Great stuff Elliot, glad it worked out ok :)

@gregormorrison2342 Год назад

thanks so much for the video what a help it was. It helped me get over my dog dying so i really needed this! hopefully i can afford hot water and a mortgage next year! But at least i know how to fix a car if i can ever afford one. Thanks, Jan 🎉🎉

@Marcosjafco 2 года назад

Thank you for such detailed video. It gave me enough confidence to try it myself instead of taking it to locksmith. It saved me 💲💲. Thanks again

@TheCarKeyMan 2 года назад

Great stuff Marco, glad it helped :)

@TheElectricianOnHisMission Год назад

Where did you buy the replacement key from?

@InspiireVibes 4 месяца назад

So I need to push the pin but not too much?

@TheCarKeyMan 2 месяца назад

No don’t push the pin, it may break the key

@jesuscandia4356 Год назад

Bad video, too slow

@garrysavage3056 4 года назад

Thank you very much, very informative and a great help - Gary from NZ

@TheCarKeyMan 4 года назад

Hi Garry, really pleased to help you all the way in NZ, hopefully we'll get out to see you beautiful country one day. Thanks for watching :)

@DarkWaveOnSteroids 6 месяцев назад

You talk too much, just get to it lol

@TheCarKeyMan 6 месяцев назад

🤣

@ianhudsontlm 2 месяца назад

Just followed this video after my key broke in the same place. Bought a key body off amazon and then followed these instructions. It worked perfectly and was exactly the same as the video. I elected to use the blade from my old key vs getting the new one cut. The punch was a bit tough, but I got the pin out, I then ground down the old blade to the same profile of the new blade and it worked perfectly. Just grind a little at a time and test fit as you go. I also used a dot of blue thread lock at the end to hold the pin for the blade back in. Thank you for the video and instructions, worked perfectly.

@TheCarKeyMan 2 месяца назад

Thanks Ian, great information here and really pleased it all worked out :)

@pulseofthemoment 2 года назад

Well done! This has really helped me; many thanks! regards from Morocco

@TheCarKeyMan 2 года назад

That's great news, thanks for the feedback :)

@philtonks1286 10 месяцев назад

Fixed my VW key!! Purchased kit from The Car Key Man and followed this guide - all sorted and chuffed to bits! Thank you!

@TheCarKeyMan 9 месяцев назад

Brilliant Phil, really pleased and thanks for the feedback :)

@BB-qu4ev 2 года назад

If I have an MK6 key, this method will work right? Also, the current key fob I have has the red button on the side, the new fob I purchased doesn’t have that. Will this effect the exchange? Or can I still use the new fob without the red button?

@TheCarKeyMan 2 года назад

Hi, to be honest I'm not sure. I've started to see Caravelle keys and keys with a red button and I haven't tried to transfer one of these over to a standard case, so I'm not sure if it will fit, sorry

@MedalionDS9 2 года назад

I had the exact same thing happen to me today with my VW Passat fob!!! I used krazy glue to reattach it, but I don't think this is a good long term solution... it still kinda wants to move around than staying absolutely firm

@TheCarKeyMan 2 года назад

Yes unfortunately glue won't last long term ;(

@whatsdavedone104 4 года назад

Hi, i have a vw key and the led isn't working? Circuit board is getting current and buttons work....all tested with multimeter....my question is....if I replace the circuit board does it need coding or is it just the transponder that needs coding🤔

@TheCarKeyMan 4 года назад

Hi Dave, with VW keys after 2010 the transponder is part of the circuit board, so yes it will need coding. Have you visited a local key cutting shop to ask if they can test your key? Just because the led comes on, you need to find out if there is a signal coming out

@whatsdavedone104 4 года назад

@@TheCarKeyMan its a key for a mk5 not a mk6...it has separate glass transponder. The key isn't for my car, its for a friend. He has asked me to change the case to mk7 style....it might be working, I don't know as car isn't with me.

@schwarzermann3651 2 года назад

Very fine super express first class to-do-DIY-Video!! Now its all well done. Thank You very very much!!

@TheCarKeyMan 2 года назад

You're very welcome, thanks for watching :)

@apw969 Год назад

Hi.,thanks for the helpful video Replacement key fob ordered from you guys. Cheers 👍

@TheCarKeyMan Год назад

Thanks Andrew :)

@tomasznantka2030 4 года назад

Thank you very much for such a detailed course including those tiny but crutial pieces of information. I really appreciate it. I succeeded of course! Greetings from Poland! :)

@TheCarKeyMan 4 года назад

Hi Tomasz, hope you're keeping safe in Poland. It's easy to get this wrong, we see lots of keys broken because the pin has been pushed in. Take care and thanks for watching :)

@1171karl 3 года назад

Thanks for this, a good help although my circlip pliers broke on the first attempt. Went for the sprize apart with a screwdriver method

@TheCarKeyMan 3 года назад

Blimey, you had a tough key. Hope it's all sorted now

@antonpettersson8713 Год назад

Amazing video, very detailed and pedagocical. Just swapped for my VW Up. 👍

@TheCarKeyMan Год назад

Well done Anton, great job and glad it helped :)

@masumchoudhury1072 2 месяца назад

You forgot the battery

@TheCarKeyMan 2 месяца назад

Good spot!

@grahamhall1598 Год назад

That key will never work without a battery….

@LucyMeakin-wr7fj 6 месяцев назад

That was incredibly helpful, thank you!

@TheCarKeyMan 6 месяцев назад

That’s great, really pleased it helped :)

@rhyanfaqir9214 4 года назад

How would you do this with a Mk7 Golf key? It’s a little different and I can’t find any videos showing how to replace the circuit board. Only shows how to change the battery

@TheCarKeyMan 4 года назад

Hi Rhyan, yes the MK7 keys are a problem. The issue is getting the correct case. I'll have a look to see if I can do a video

@Trophy12321 2 года назад

Hi Friend, thank u for video, where can I buy a 4 bottom remote?

@TheCarKeyMan 2 года назад

Hi Farid, I don't know, really sorry

@ಠ_ಠ-ಡ2ಝ 4 года назад

Hello I have a question, I bought a Polo 5 that does not have remote centralisation, I bought a centralisation kit on eBay but there is no information on how to install it and I can't find anything on the internet for the Polo 5, have you ever done an installation of this type ?

@TheCarKeyMan 4 года назад

Hi, I'm sorry but I don't do electrics, to be honest I'm fine if I can see it moving, but electrics is black magic to me!

@Goloso333 3 года назад

'cut the same' you mean taking it where they make house key copies and duplicate the engraving of the key? or how do you propose that step? at the very end of your video.

@TheCarKeyMan 3 года назад

Hi Lenin. The two choices are getting it cut at a shops, as you suggest, or reusing the old blade. If you choose to reuse your blade you'll need to modify the blade. Let me know if you need a kit for that

@quangnguyenofficial2010 Год назад

Thanks for video

@TheCarKeyMan Год назад

You're welcome, thanks for the feedback :)

@Bourbonblues64 Год назад

Excellent. Just changed out my polo key. Thanks.

@TheCarKeyMan Год назад

Great job, well done :)

@zoegamble-beresford6234 4 года назад

No easy fix then. All this hassle because of a shitty piece of cheap plastic. Way to go VAG.

@TheCarKeyMan 4 года назад

Agree, not the easiest key to fix. Do you have a spare? In all honesty, the standard of VAG keys is getting worse and worse. We saw a 2018 transporter key broken last month!

@lightingspeedk 2 года назад

Thank you ! I ended being able to fix my Jetta key that accidentally got burnt on the back all pieces were still functioning ! And the new casing worked

@TheCarKeyMan 2 года назад

Good job! The fix is a bitt fiddly, but in your case definately worth it :)

@Cap661 Год назад

What if I do all this and the dashboard says “no key” when I go to start it?

@TheCarKeyMan Год назад

Hi, it means that the chip inside the key has been damaged. Did you open it with circlip pliers?

@Cap661 Год назад

@@TheCarKeyMan No I’m afraid I did not, it must have damaged something then, I used small screwdrivers to pry it open. I will have to get a pair.

@MickJ666 2 года назад

Perfect video😁😁❤❤my heart sunk near the end when you changed the tops over😲 but then you said you would show how to wind the blade back on if it comes apart at the end of the video, I cheered out loud🥳🥳🥳🥳 Thanks to you a have my flick key back after months of having to pick the blade out with the button pushed everytime I got on or out, as my central locking wasnt working 🤣🤣🥳🥳🥳💪💪💪💪

@TheCarKeyMan 2 года назад

Well done Mick, these keys are so bad, but I'm glad you're up and running again :)

@nigelwhitelightning8000 Год назад

This looks real good easy and cheap to get. Can anyone give me a name in Sussex who will cut the new blade? Everyone seems to want to do the whole job £120 - £250. Went ahead and transferred my blade. I have plenty of small files and a Dremel. I had to adjust just about every dimension, even the depth of the groove. The new pin turned out to be hollow and crushed rather than shift, had to drill it. More seriously the switches, which should be stuck to the PCB, were adhered to the buttons. Work of art to sort that. Hope the next one is easier.

@TheCarKeyMan Год назад

Sorry but I don't know anyone that way

@nigelwhitelightning8000 Год назад

@@TheCarKeyMan thanks for reply. I am pretty handy and have tools will try replacing blade.

@hongwenzheng3943 Год назад

This is the best! I actually used the old case with the knowledge of this. Thank you.

@TheCarKeyMan Год назад

Thats great, pleased it helped :)

@sogolondjata Год назад

Thank you very much for this very helpful video. This worked like a charm on my 2013 VW Passat key! I saved all my bother and got my key cut, and it was easy to switch. I managed to use a pair of regular needle nose pliers (didn't have those spreaders) and just pulled it apart. Took a little muscle, but I did manage to break it open without damaging the brains. Brain transplant was easy, and boom...or should I say, Bob's your uncle. Many thanks!

@TheCarKeyMan Год назад

Great stuff. Yes it's always easier if you can get the blade cut. Some chains of key cutting shops refuse to cut keys that they haven't sold. Glad it worked out well for you and thanks for the feedback :)