Wagner / Titan won't spray 

Yours is tbe only video that fixes the problem without the repacking kit. The trick is freeing the upper AND lower ball. The lower ball is easy to access but your method gives access to the ball inside the piston. Also, I didn’t need to remove the cage however as mine was clean. After freeing the second ball in the piston, I sprayed brake parts cleaner all over both balls to make them extra clean. Works like a new unit now. To avoid the balls freezing in the future, it’s important to clean thoroughly until clear water comes out of gun, then suck up some full strength pump armor before storage. Cheers!

Mine stopped priming, thanks to your video I pulled it apart, found the dried paint around the ball. Fixed it !Thanks so much.

Thanks for this! I have a titan xt250 and this gave me the confidence to pull it apart. I’m a carpenter by trade so I’m always Leary or pulling machines I don’t understand apart. Much appreciated

Thank you so much! My Titan 440 had been sitting for over 10 years and wouldn't prime. I wasn't willing to give up and try to go to bed tonight with the thought that I might be using rollers to do the whole job tomorrow. Fortunately, I found your video and it gave me confidence to find the problem. Just needed to poke the little ball with a screw driver to free it up and wipe a little loose rust and grime out of the lower ball and seat assembly. Only problem now is the water came flowing out of the selector, until I switched to spray mode. Will take a closer look tomorrow morning. Worst case, I'll just be ready with a bag of old towels.

I had not used my 440 in about 1 year. It would not prime. I watch your video and did what you said, now it works fine. Thanks for your help

Hey thanks for this video. You saved me from having to take it to the pump repair shop.

Wow dude you just saved me 400 dollars. I did exactly what you did and mine had a piece of rust keeping the ball space opened.

Thank you for the video helped get the sprayer going!!

Thanks for this worked a treat. Absolute life saver 👍

thank you for giving a very clean clear and straight instruction good teacher.

Mate this saved me big time. Thanks so much! Turns out that bearing on my gun was completely locked up

Really great staff Thanks helpful man you are amazing I have two wagner but was don't know how to clean properly thanks again

Hi Ali. Thank you so much for this very video . You really made my day. Good On You

Thank you sir.You did a great job explaining everything

I owe you a beer 🍺, saved me hours , cheers

Just want to thank you your video help me, keep up the good work and thanks again.

Best explanation! Thank you

Cheers for the tutorial. I'll try to disassemble mine tomorrow. It's been playing up 👍🏼👍🏼

Thanks mate your a legend you have saved me heaps of $$$

Thanks for the video mate, I bought a new titan 440 and it wouldn't prime or spray" brand new out the box" I took it apart & whatever assembly grease they used gummed up around the ball seat I scraped the dry grease off with my fingernail & a shop rag. I put it back together and she runs fine.

Mate thank you for this video, I have wagner ps.3.20 been great to use only i don't use pump armour , I will from now.👍👍 thank you great video

Great video thank you

That was so good to know. Thanks. You saved my machine.

Legend, thank you very helpful

Great video helped us out !!!!!

Thanks bro. It works now!

You are the man

Hey Ali did the clean up and everything what you mentioned but still getting stock no prime should I replace everything for new parts??

Hi Mate.Thank you For the video. I need to trouble shoot a problem on my Wagner3.29 pro spray. It was okay before but now it turns 360 all way round when I try to switch from prime to spray. The machine Goes to spray mode when I don’t press the trigger but as soon I press the gun trigger it automatically goes to prime mode but still I can see some water from gun but no water comes the prime hose even when the Machine is in prime. Plz assist me.

great stuff man , my wagner was playing up its not now thanx man

Hi pal I have a wagner 250R which has got a blocked pump assembly, can I take this off the machine if so how? Can't figure out how to get it off. Any help would be much appreciated. Cheers Steve

I get pumps destroyed by being left in water constantly. I have a graco 390 ultra that I have used to death with two repacks and the cylinder and piston are still smooth with a slight swage. I clean and thoroughly fill with thinner with a little bit of red trans fluid mixed.

Thank you very much

Thank u Sr.

Sub'd & Liked. Good descriptive video Sir.

You are a legend mate, your video really helped me . However, I have fallowed exactly your instructions with my Wagner 321 and re assemble it but it spray and then lose the pressure . Please guide me of what is the issue with my sprayer ! Thanks Ali

Hi, Do you know where i can get a replacement motor for the ps3.21? what is the motor model #?

Thank man

You are a legend Ali 👍👍👍👍👍 Just saved me a massive headache… it was the exact problem and the exact machine I have .. New Subcscriber and customer 👍👍👍

I have a three wagner 3.21, only one running now, so just pulling one apart and having trouble, you helped a lot. Thanks Where can i get cheap kits for them?

Thanks

why is paint still coming out when i shut off the prime tube valve ..is my prime valve clogged or broken...

hi, i have 4 sprayers, 2 grecco and 2 titan, both are well clean but they stop sucking paint every 2 or 3 minutes while spraying and i have to hit it with hammer to make them work, what might be the problem?

Thx

Hi Arley, mate my machine isn't priming, I've cleaned out the bottom as in your video but the ball above the piston ball I believe you called it isn't moving and seem stuck in the up position, any hints on what to do as I don't have time to put in for service as I've got a priority job that needs to be finished in a week and I'm relying on the airless to get the job done in time.

Thank you brother ali did you have another video we can to watching

I know this isn't a titan 440i but maybe you would have some general idea of what to look with my problem. my titan 440i motor keeps smoking and blowing the fuse. i pulled it apart and see that the brushs on the motor are heating up and smoking then blowing the fuse . would you have any ideas what it could be?

Hello man i have a question is wagner ps 3.20 the same as titan 440i? Thanks in advance

I have the same machine ,while spraying the power goes off and will not turn on: sometimes it will turn on in 10 min some times next day, what is the reason?

I guess you just fixed mine also

Thanks. Having prime issues on my 440. I will try this. Also my 395graco primes is weak. Same fix???

👍

Do you have any tips for an old sprayer like a Wagner 505?

Hi Ali can you please offer me some help regarding Wagner project pro 119 spray unit . After cleaning inlet and outlet valve thoroughly machine still fails to prime completely. Machine won't even prime an inch of water. Would you suggest a pump kit is required? Their are no signs of pump leakage Really would appreciate your urgent feed back. Thanks , Steve

Hi. Can't get that first clip on again. Pls help

Hi