Washing Machine Not Spinning Just Hums: SAMSUNG FIX 

If you found the video helpful and want to buy me a coffee i have a page here, every coffee makes a huge difference, so thank you in advance. www.buymeacoffee.com/zeroto60tube/why-i-buy-me-a-coffee

We are in South Africa (we live on a nature reserve so nearest service support is a mission) our washing stopped spinning and only hummed. We found your video, then we found some broken wires, joined them….now we spinning again. Thank you so very much…..your video saved us PLENTY.

Absolute legend. Looked at so many videos. Just about to give up. Sure enough a broken wire. Thanking you

thanx for the video. Had 3 broken wires repaired them now spinning again. U saved me alot of money to book it for repairs

Hi thanks for the upload, your video guided me in the right direction. Had 2 wire breaks ,red and black in loom, machine is working 100% again. Exactly the same machine. Your video definitely a money saver for me. Greetings from Cape Town, South Africa

That round thing you unplugged is your shifter actuator it helps the washer determine what speed you’ve selected for your cycle.

Cheers, fixed mine today after watching the video. Turned out the blue and red to the capacitor had snapped at the join in the wiring harness. What a silly design, why not mount the cap just near the wire start point instead of adding in 50cm of wire that could snap haha.

So helpful mind was not spinning the blue wire was broken put it together and boom my machine started spinning again.Thank you so much gor the video

Thank you so much The outlet pipe was just clogged up in my washing machine

Never rely on a switch at the mains, always unplug the power at the mains!! Be safer!!

Eureka! Thankyou! Your video saved me a ton of hassle. Having already raided and old aircon for a capacitor, I did a continuity test from capacitor to motor plug, as you showed. This was open circuit, prompting a closer look at the harness. What I saw next reminded me to don a head torch and have a darn good look in the first place, because the broken red wire and its burnt ends were right there in plain view! This is pretty poor work for Samsung... a heavy bundle of red wire (presumably some small current-limiting resistance for the starter winding), poorly supported at its ends, that leads to stress and breakage. I'm just waiting for the next broken wire now. Any other ideas why this metre of wire is in a bundle? Dave, Adelaide SA

Thanks so much - wires had dropped down and burned out on something. Mine's still humming, but is spinning at least!

Thank you very much for explanation of E6 problem iwill have to buy a new part thank you so much

Thanks for sharing

Good bro thanku for way of explaining , not an Engh can explain this way

I saw the video, did a visual check and I found a frog in the middle of the pulley and the belt, I removed the frog and reinstalled the belt and now it's working perfectly. Note: my washer machine is outside.

Hi there, my Samsung microwave makes the same Humm noise, do you think the same combobulator would be broken also?

My washing machine isn't broken... still watched the video! Is that a Estoril blue e36 m3 in the background?

Thanks

Well some woman is missing out on a great catch! LOL.

THANK YOU SOOOOO MUCH

mine is not spinning while on wash cycle only the water is filling but spinning while on rinse cycle. please help

This Help me am thankful 🥂

Ever experienced where the machine doesn't wash? but the spin cycle works. U only hear the hum during the Wash.

Sir my Samsung washing machine rotates empty but when I put clothes it wash rince but when going for spin it stops with a cling and taking water again and again 😢 please reply thanks

is it ok or safe to lay the washer face down?.. wont cause issue with balance??

Tysm 😘

Why is the Samsung top load washer very cheap and what is the model number of this washer?

Did you get any codes? EKP module overheat?

My Samsung only spins when the outlet pipe is on the ground (flat) 😞

Samsung had no right making washer machines I bought one a year ago and now it's giving me lots of trouble with that OC code.

Hi did everything you showed it started working again now only thing is everytime I turned the machine it automatically starts spinning and even when turning it off it would continue to spin for a bit please help

just noticed bout the red wire loop wnder why?

hello sir the problem of my washing machine is that the wash and spin is not working but I already check the capacitor and the drain motor, both of them are in good condition, i tried to spin the wash motor manually also in good condition, what is the other possible that my washing machine is not wash and spin sir?

On mine, I tried changing the motor but the machine keeps burning the motor

Goog jobe

Why dint you just unplug the damn washing machine from the electrical socket in the wall. Why just turn off the black switch . Youre nutz.

The ohms for the capacitor is about 1200

What is this channel!?!? You didn’t even let us know!

I have a brand new Samsung and it it's doing this right out the box. It also trips the breaker

Bricked CAS module 😂

💯😎

Trash company makes trash products 🤷‍♂️

Lg

❤,❤,❤❤❤,❤❤❤🤑