Watch Me FAIL Trying To Complete The FJ40!

Подписаться 253 тыс.

Просмотров 47 тыс.

50% 1

Get your powder coat here! www.prismaticpowders.com
Stone Black: www.prismaticpowders.com/shop...
Check out my hood struts and engine bay lights here!!
avrcustoms.com/collections/ez...
avrcustoms.com/products/bay-l...
Get your FJ40/45 ditch light brackets here!! avrcustoms.com/products/fjditch
Get 15% off these Auxbeam pod lights!! Use code "ASN1" auxbeam.com/ASN1/X-PRO
Where I buy parts:
amzn.to/3B7SKuw
ebay.us/wuVMNx
(I may be compensated for purchases through my affiliate links)
Sponsors/ Discounts:
Summit Machine: "ANIEMELA10" (Call or email) www.summitmachine.com
Evolution Power Tools: "ANIEMELA" aspireiq.go2cloud.org/aff_c?of...
Deep Saws: Use code "niemela5" www.deepsaws.com
PerformanceTDI: "AUSTIN10" at performancetdi.com
CT Sounds: www.ctsounds.com
EcoFlow: amzn.to/3Uw0mO7
Atoto: amzn.to/3Y0Khms
Vevor: (Use code "savemore5") www.vevor.com
www.prismaticpowders.com
www.cerakote.com
Check out my website! avrcustoms.com/
Follow me on Instagram! / austinniemela
Camera equipment used in the video!
Sony ZV-1 Camera: amzn.to/3N0SksQ
Rode Mic: amzn.to/3OnQUKw
GoPro: amzn.to/3TCBGX2
Tripod: amzn.to/2WjasJM
Send me stuff!
PO Box 133
Chattaroy WA 99003

Развлечения

Опубликовано:

4 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 130

@KH102695 2 месяца назад

With all the custom touches and modifications you've done on this FJ, those tail lights are so sanitary. Fitting glass can be super frustrating for sure. Awesome job on everything, defiantly one of the best builds for sure.

@austinniemela 2 месяца назад

Thanks man! Yes glass is no fun when you have the wrong gaskets!

@KennyHepundjua-ff2fd 2 месяца назад

Even with the right gasket it’s super hard too. I’ve tried to replace my Land Cruiser pickup canopy glass and it was an epic fail

@RM_Garage 2 месяца назад

Man I understand the struggle. It's difficult as a creator too because you have to publish a video. You can't just leave it in the garage and take care of it later. You kind of have to figure things out on the fly and it makes working on projects that much harder and time consuming. Still, the 40 looks amazing. Great job so far on this build.

@austinniemela 2 месяца назад

Thank you! Yes exactly! I can't just go work on something else especially when I haven't put a video out in 2 weeks! It's gotta get done NOW! lol

@robbricknell1789 2 месяца назад

I must admit to having a quiet chuckle regards your window gasket woes, its nice to see that you are the same as the rest of us, window instals always got the better of me too (at least you haven't broken one yet). I admire your engineering, and like that you admit your failures along with your victories. This is definitely a project that seems to be a case over build, in that a stock FJ would probably go everywhere this one will go, just not quite as fast or as pretty. One would hope that you will make some vids of you actually wheeling this beast. One suggestion regards the looks .... consider powder coating/painting the bolt/screw heads, the silver looks out of place. This isnt a criticism of the build , I love it, would I want it, hell yes ... would I wheel it, NO its too nice to bend or break ( I'm not a lot different to you in that regard). Keep up the great work.

@kflo1219 2 месяца назад

Bro…this is one if not THE SICCCKKESSSTT FJ’s I’ve EVER seen!!! Geez😂🙌🏻

@austinniemela 2 месяца назад

Thanks bro! Sheesh! 👍👍

@wfyfwfyf 2 месяца назад

Austin here trying to hold back the profanity in the wrap up of this video. We’ve all been there brother.

@Nilezy 2 месяца назад

Awesome work Austin! If you still have the third gasket, you could try using bug screen spline in between the main gasket and the glass in the channel. You can get pretty small spline that will compress and fill that gap and keep the glass secure. Might be a pain to install as it will be pretty tight, but it might work

@Anders0nic 2 месяца назад

Why not use OEM gaskets for the windows? They aren’t discontinued.

@austinniemela 2 месяца назад

I can’t find them for a 71! I’d love to see where you are finding them!

@Mr_Ruhl 2 месяца назад

The tint will be fine for wheeling if you add some side and rear flood lights. Some rock lights would be useful as well and not just for show. 👍

@walterphillips9950 2 месяца назад

Don't beat yourself up. Failure is the BEST teacher

@johnbagley1441 2 месяца назад

Hello from the uk, your build s are on. Another level

@robertopereira9418 2 месяца назад

Estou ansioso pra ver este projeto andando... Trabalho magnifico.👏👏

@tomsloger4073 2 месяца назад

I get it about thr windows,you just have to step back and try them another day. It will all come together the next time. Great video as always , looking forward to the finished FJ.

@Owl566 16 дней назад

This rig is amazing - I’m binging all the episodes. You’ve done such a great job! My only thought was, is there any drainage from your tail light frames? If water makes it past the light gasket it looks like it might pool against the body?

@batanaibaureni7765 2 месяца назад

Your knack for excellence is inspiring Austin, go on brother!

@ronthompson2366 2 месяца назад

As always enjoy watching the build progress. It is funny that you mentioned everyone thinking it's been so long since you last posted. But it has felt like it has been longer lol. Just really enjoying seeing the progress and it's not letting anyone down. It's a great rig.. 👍 it looks fantastic. The hiccups with the windows will work out. Curious, did Toyota have two bumperettes on the rear bumper ? Anyway, again this is a great looking rig and seeing it all come back together. It's a lot of fun. 😎👍

@donigor9549 2 месяца назад

Austin, I know this kind of frustration, take it easy and take your time, everything will gonna be fine. Great job, congrats, man.

@user-ir6xb8ux8z 2 месяца назад

I'm watching all these great project videos in Korea. I praise you for your persistence and outstanding ability

@SheaRibbster 2 месяца назад

Awesome work as usual! I'd love to start blasting and powder coating some parts. What media are you using in your blasting cabinet?

@austinniemela 2 месяца назад

I usually use aluminum oxide media! I just bought some green diamond but haven't tried it yet, supposed to be good stuff too!

@SeanFinland 2 месяца назад

Looking great so far. Well done. You are going to make it a lot easier for the next person who has to go through the same challenges. 👍

@StormbornJKU 2 месяца назад

It’s really coming together. So much custom work. An insane amount of modifications. It’s wild how you’ve got the abilities to do it all. Great work and I look forward to the next one!

@austinniemela 2 месяца назад

Thank you man! I learn as I go!!!

@landb1873 2 месяца назад

Looking good--love the updates as you go. Would really enjoy seeing an "outakes" or "blooper" video. Lots of cussing, throwing stuff around, etc. That would be a fun way to see a little more behind the scenes. Keep up the great content!

@joshuamorris1955 2 месяца назад

I think all the hard ball days make ya really appreciate the project more when it’s done. If it all went together like legos we’d all forget the things we get done pretty quick

@caseyrriddle 2 месяца назад

Take a look at Jeep wrangler windshield wiper arms. Not sure if the splines and diameter would match, but it would get you into a more readily available wiper blade setup.

@radomvids187 2 месяца назад

Keep up the good work bro, you are almost there. You are inspirational to all of us following your channel.

@austinniemela 2 месяца назад

Thank you so much 😀

@randy6350 2 месяца назад

Your tint DOTS is dirt between the glass and the tint! Use more water to clean the glass and DO NOT LAY the glass flat! Lean them against something so you can soak the crap out of them.! The soap and water washes out the dirt. You have to use a lot of water.!

@JakeMartin-qm5iz 2 месяца назад

You edit these videos perfectly!👏

@Jmonzy1 2 месяца назад

I’ll just weld an updated wiper arm end (where the blades connect) from a more modern design and get better blades. Those old blade design don’t do a good job.

@CGGarage 2 месяца назад

Not gonna lie, this is what I would do too. I know he's spent a lot of time on this, but he should totally do this to save some $$$

@TurkiAlsubiee 2 месяца назад

Great work, man. Thank you and I wish you success. Your follower is from Riyadh, Saudi Arabia.

@toddblewett319 2 месяца назад

No stone unturned! Going to be an amazing truck 💪🏼💪🏼 nice work bro

@austinniemela 2 месяца назад

Thank you man!! I can’t wait to finish it!

@stevendouglas6593 2 месяца назад

I always enjoy watching you work Austin. You’re always so careful and precise. You never seem to get annoyed or angry when things go wrong. A true craftsman.

@austinniemela 2 месяца назад

Thank you! I definitely lose my cool sometimes, just not on camera haha

@jasperbumgart1891 2 месяца назад

Fantastic so far! Glass can be frustrating. Still the cleanest looking FJ40 around.

@oscarag5640 2 месяца назад

Those headlights 😮‍💨 mamá mía!!

@lknakoa 2 месяца назад

Fj looking hella dope bro..🤙🏽

@austinniemela 2 месяца назад

Thanks man!

@somdood3292 2 месяца назад

cant you try the string trick on the newest gaskets you bought that looked like theyd work?? they just look like they need some love, maybee put the gasket on the glass and then try installing or use a plastic trim removal tool and run it around the window edge under the rubber to pull the flappy flap... idk man been watchin this build since you had chassis complete which was when i found it through youtube and binge watched it and now its just sick... glass or no glass, also those dots are dust under the tint....

@Tfr2135 2 месяца назад

All the rubbers you showed in your video needs an aditional strip inside the rubber. You should put the rubber inbetween the window and the car with the "third" opening on the side pointed outwards. After placing the window you ad the filler stip. This strip compresses te rubber so it locks te window in place.

@austinniemela 2 месяца назад

Yes this is exactly how I did it, the gaskets are simply the wrong size!

@pukargurung4200 2 месяца назад

I would buy that jeep in a heartbeat if i was in the states. Great work Austin

@b.j.carpenter1976 2 месяца назад

factory window gaskets there are several vendors selling them. There still going to be a giant pain but atleast they fit...

@citizenone3442 2 месяца назад

Looking great man.

@beatsnbeards3798 2 месяца назад

nice job!

@deadspeed6679 2 месяца назад

This has to be one of the best builds on Utube ever

@josestanziola7764 2 месяца назад

Hola Austin excelente video,donde esta el toyota hilux blanco?

@appleguy6708 2 месяца назад

I really like these builds I haven’t been this excited since Trevor from motion auto built the Supra

@EdwardRoss-tb5hz 2 месяца назад

Hang in there bud you'll get it. Rig is looking killer

@willarkoncel4413 2 месяца назад

👍🏻👍🏻👍🏻

@marinmarinov1020 2 месяца назад

I felt your pain brother! The FJ is looking killer!

@bobbywatts7472 2 месяца назад

brother I truly enjoy and love your custom work and would pay you if I could to do work for me awesome work a true fan you inspire me honestly in Eastern KY.

@hookset4137 2 месяца назад

I retrofit third or 4th gen 4Runner whipper arms on my 85 u may be able to do the same thing just swap the 75 whipper on

@cattfsh 2 месяца назад

Great build. Where did you get the driver and passenger mirrors? Looking for a set that mounts to the old doors.

@austinniemela 2 месяца назад

Thanks! I built the mirrors!

@codyfinchum890 2 месяца назад

Hopefully you read this Austin you can buy a cheap wiper blade modern and take them apart and cut them to make those wiper work

@beadblaster9508 2 месяца назад

You could run a small bead of windshield urethane under the rubber to seal it.

@tonyalas9427 27 дней назад

What suspention did you use on your Land Cruiser?

@smplyizzy 2 месяца назад

Why not contact ICON in CA I bet they can tell you what they use for the gaskets

@gregh7457 2 месяца назад

that advice will cost you $199.99

@hgwmfg703 2 месяца назад

If this is locking window gasket then I would think it’s missing the plastic locking strip that goes in the groove to actually lock the window in place like on a Chevy squarebody truck???

@MamayFreeride 2 месяца назад

Here are three things you can watch forever: fire, water, and Austing working =) Good Job!

@austinniemela 2 месяца назад

Haha thank you!!

@Eeropolvasti 2 месяца назад

Good Job, young man, "Finn", couple questions: You have to heat up your items, before you Power Coat them?? How long, How hot?? And, after you done Power Coating, same thing: How long, and How hot??, Does it depens, how large/ small is item?? Thank You, greeting from South Florida, from another Finn, only 90 F today ;o)

@mrm4155 2 месяца назад

good job!

@drgunit893 2 месяца назад

Hard work but this thing will be so worth it!

@TheNickademas1 2 месяца назад

Of all the years I have been watching you Austin and all the ups and downs of fabricating and mechanics which pisses me off to no end and watching you Just truck on through….i would have never guessed window jams/seals would be your demise. 😅

@austinniemela 2 месяца назад

Haha no kidding!! I just need to find the correct size gasket and it should be a breeze!

@kemboijonathan9766 2 месяца назад

I wont mind being your assistant man on the restoration jobs. Holla back

@denbrown8301 2 месяца назад

Incredible JEEP👍🏻 Good luck to find normal gasket))

@deepinderdhaliwal9453 Месяц назад

U r Genius bro

@douggrunberg 2 месяца назад

Looks awesome!! 👍 Thanks!!!

@mikeingalsbee2959 2 месяца назад

Did you think of using smoked headlight paint on the corner windows?

@Pigtrapper 2 месяца назад

I've wanted to try that. We used to put clear coat on the paint booth glass... once it got covered in paint dust... take an air hose and blow the clear coat off. We couldn't have electric inside the booth so the booth was made of glass with exterior lights

@sirjareq 2 месяца назад

This car looks amazin man!

@robco6997 2 месяца назад

Two observations from your window install. Put para cord in the rubber seal and use it to pull the seal through ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QvcJ_lU_VpQ.html ) . The second install the lock seal into the rear window and check the fitment before rejecting that seal size as the lock rubber may take up the slack.

@ChrisAdams-hn2ih 2 месяца назад

That's it sometimes the best thing to do is walk away ,..clear your head and start again.....the fifth time.....windows argh.......and then when they have brand new gaskets and leak....oh boy.....

@marceloquerci1752 2 месяца назад

Very very good

@douglasclauson3133 2 месяца назад

Days like that happen 🤷‍♂️ your FJ is going to be awesome when it's done

@gerardogomez1544 2 месяца назад

Nice

@michaelcarnline556 2 месяца назад

I like wd-40 for windows. Most of the locking strips are a pain in the ass.

@smartmonkey8187 2 месяца назад

Молодец! Прям приятно посмотреть! Привет из Владивостока (Россия), смотрим тебе с удовольствием.❤

@user-qq3rf2nh1b 2 месяца назад

Привет из Тувы, сижу смотрю и думаю как ему написать что у нас на уазиках стекла с такими резинками залетают за 2 минуты. Сочувствую его жопогари.

@smartmonkey8187 2 месяца назад

Как там погода в Туве?

@shelbydog1100 2 месяца назад

3M makes a epoxy for glueing windows in the channels

@samisonline99 2 месяца назад

give yourself credit ! I would have been ordering cameras and monitors half way welding pieces of sheet metal onto those windows ! 😇

@austinniemela 2 месяца назад

😂😂 I was about there!!

@NASTYcraftX 2 месяца назад

Take the back door to a window shop and they'll figure which gasget you need.

@oswardg8285 2 месяца назад

Austin are you related to Devin neimela?....... ......... Great work I really like your work 👌

@austinniemela 2 месяца назад

Yes Devin is my brother! And thank you!!

@marshallgerow3277 2 месяца назад

Put the tinted glass in the sunlight let the sun works it’s magic.

@bobbyjones2363 2 месяца назад

You will get it .!

@mahdialsenussi3066 2 месяца назад

👍🏼👍🏼👍🏼

@johnnycashh7148 2 месяца назад

Getting sooo close... 😮

@eduardoalfredo5484 2 месяца назад

First, a canvas is inserted into the rubber. the glass is installed and then the canvas is removed

@jclc4201 Месяц назад

You forgot to use the heat gun for shrinking the tint. Nevertheless great video man!

@justingibbons5559 2 месяца назад

I thought the second gasket looked fine but someone was mentioning a locking strip

@austinniemela 2 месяца назад

The locking strip was in!!

@juneferpanulde1720 2 месяца назад

U should use rope put inside the ruber then slowly pull as u slowly push the rubber. Its easy to install if you know the technique

@ukash08 2 месяца назад

После этого 😂😂

@elijahsparrow966 2 месяца назад

Good effort mate, don’t lose heart haha

@isairomero89 2 месяца назад

give it to me 😅, that would salve all your problems lol

@davefury66 2 месяца назад

Wuz up 😎🤘🏼

@austinniemela 2 месяца назад

What's upppppp!

@ukash08 2 месяца назад

Ford bronco 1966-70😊😊

@FredieFarmer60 2 месяца назад

👍🏽🇺🇸👍🏽

@osama120ks9 2 месяца назад

How tiring is adjusting

@jsvallee567 2 месяца назад

windows are pain man !!!!

@austinniemela 2 месяца назад

They sure are!!

@betodegra6218 2 месяца назад

Nice job 🇵🇦🇵🇦🇵🇦🇵🇦🇵🇦🇵🇦🇵🇦🇵🇦🇵🇦

@user-wg4oh2bh9e 2 месяца назад

Супер! Україна дивиться.

@tnguy9696 2 месяца назад

those dots in your tint should go away in a couple of weeks

@mj_forli 2 месяца назад

First to watch 🎉

@THE_Tyler_Rogers 2 месяца назад

My fingers hurt just watching this

@travisarnold8872 2 месяца назад

Jesus Christ no other name given whereby men can be saved.

@arvindriddick 2 месяца назад

Awesome job on the tint man. You did a great job. And don’t beat yourself up about the window gaskets. You will find the right one. You got this man 💪🏼 Im a little curious about the boxes tho. What are they for 👀 did you also film the fabrication process? I’d love to see a video about it 😬 or is it confidential 🥲

@austinniemela 2 месяца назад

Thank you! The boxes are to cover huge fiber cable reels, and no I didn’t film it!

@francistam1263 2 месяца назад

I enjoy watching all your videos for this fj40. Just wondering if you accept working for an individual project?

@arvindriddick 2 месяца назад

@@austinniemela If u ever fabricate stuff other than car and truck stuff. I’d like to see a vid about it 😬 unless it’s too much work for little ones profit. But please consider filming your other work too 💪🏼❤️