watch out !! using a angle grinder||how to mount a cutting disc onto an angle grinder correctly 

cutting disc position is not important,don't use grinder without disc guard. Best practice don't remove disc guard anytime,you can adjust disc guard by lossing screw and turning your hand.

no no this is wrong 🚫 must need to use safety guard for angle grinder

I had a lot of old pipes and rebar to cut up and from what I read ru-vid.comUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.

Although it is a good practice to keep the disc face with the printed label downward and tighten the nut on the plain side, but it is not advisable to tighten by gripping the disc. Reason for keeping the label side down is to avoid the emery surface damaging the bottom plate. Always use the supplied wrench and by holding down the lock on the back side. Similarly always use the wrench to unscrew and always remember to remove the cutting disc after use. Otherwise there is every possibility of the disc getting damaged. As mentioned by some others never use the machine without the guard and safety goggles. Thanks.

Always a good idea to check that the machine is disconnected from the power source (unplugged or remove battery) before installing or removing blades. And use the safety guard!!

One of the most important issues of using an angle grinder is the disc itself. Do NOT buy cheap discs! The cheap disc will break very quickly and at 10,000+rpm any small object flying out is deadly and without the safety guard the risk increase by x10.

No guard no gloves no face shield wow you the boss 😅😅😅

Unsafe because you forget to put or to install the grinding desc guard

Para que sirve el protector del disco y el mango para sujetar que trae la amoladora, por algo lo puso el fabricante.

Oh my bro... Disc guard is very important. Safety is number one.

RU-vid seems to be full of these self-proclaimed "experts". You're correct about the orientation of the disc but why are you doing everything without a guard? FAIL!

I bought a new grinder and it's my first time.. so thank you for the tips.

We had an accident while using the grinder. The disc broke and the pieces flew everywhere, sadly my dad was hit on the shoulder. He had 8 stitches. Safety first, put the guard on and wear protective gears. I know it's hard to grind if there's a guard attached but safety is the priority. You'll eventually get used to it.

Hahaha! The most important thing you missed out. That is the safety guard. Also one must not tighten the disc with hand as shown in the video. One must use the special tool suppled by the manufacturer. And again along with the safety Goggles one must also wear proper clothing, preferably of Cotton or Denim. Gloves is to be of Leather preferably and not Cotton. Keep the surroundings cleared of Flammable liquids, waste Cloths etc. The sparks coming out the Grinder will easily ignite them and the person using the grinder will not even know it. Thanks.

This is totally against the law of using.disc should turn over to prevent split,spinning should spin against the tightening screw to prevent losen.this you are right.disc guard is vital.

ਬਹੁਤ ਵੱਡੀ ਜਾਣਕਾਰੀ ਮਿਲੀ ਹੈ।

Mainly one wrong from you, must be use blade guard when cutter using.

It is unsafe to use the grinder without a disk guard. Always tight the disk with the provided key/ tool, not your hand. Cutting disk and the like have the arrow ➡ to indicate totation direction, always observe and follow that.

Very dangerous to use without blade guard. If blade brakes the flying parts can inflict fatel wounds

I have often seen welders not using disc guard. It is dangerous without disc guard. My disc broke 2 times during use. Luckily i was using disc guard and broken pieces of disc didn't come towards me.

this video help me to demonstrate during my welding class. thanks alot.

I used portable grinder big and small,sence 1978 until now ,but l make my own cover design if using the cutting disc, the original cover if l used grinding disc. I never meet accident if the disc is broken...Safety First Always...

модель очков мне понравилась ) стиль 1970 ых сейчас в моде

wrong the washer allows the mounting nut the ability to remove abrasive disc if the blade gets jammed

Legends not use disc Guard❗️😂😂😂 They are ready to stich body part❗️😃

Guard & handle are missing. Consider readinģ the disc label as it indicates the expiry date of the disc & its rate (rpm). The disc rpm should be higher than the machine rpm.

Correct way is not removing the guard

I think it is wrong placing of disc it should be inverted to loosen easily

You are very wrong from the very beginning my friend! Guess what's missing? 😂😂😂

Unsafe bec. You forgot to install Safety cover and hand gloves , maybe u dont also use eye protector

Where is the grinder guard?? and your gloves????...good to see you have utilize your eye protection.

Please wear safety hand gloves and don't forget to wear glasses too. Thank you.

بسیار متشکرم از آموزش خوب شما و نکات مهم که در این ویدئو آموزشی ارائه دادید......موفق باشید

Why manufacturers don't make clear / see thru guards??

.....And even handle to minimise shok in case the grinder kick back.

Common boy, You did not yet experienced a broken cutting disc that smashed your part of your body that's why don't install the guard while you work or use.

Friend, put on the protective cover of your angle grinder！

This is called how to loose eyes or faces cutting No Guards... very nice cozzyy

Valami még hiányzik. A szikra vezető burkolat, ami megvéd ha véletlenül leszalad a gép az anyagról. Ha megmutatsz valamit akkor azt helyesen tedd meg.

Always use safety eye glasses while grinding. 👍

Jamais usar sem a proteção da máquina.

Today only I purchased one ancle grinder. Your demo will be very useful to me. Many things (every thing) come to know me. Thank you very much sir..

You must use the key to tighten the disc and the disc guard must be in place before operating/using the grinder.

TU EQUIPO DE PROTECCION PERSONAL Y TU GUARDA EN EL EQUIPO

Cutting disc. Quality and date of expire. Watching. Or. Grinding mission. Amber. Disc amber. Calculated. Safety guard very important. Dead man switch. Cutting wheel removing key. Any time inspection after you're. Full. P P E. Chaking..... After Start you're working...

It seems you forgot to install the most important safety feature .... the disc guard !

Good

without angle grinder' s safety disc guard ?

Pourquoi vous avez enlevé le cache de sécurité

Re-do the video with safety guard and wrench for tightening the disc/wheel.

Even the elementery school boys,understanding this way...lol..

Tick sign is square root😂😂

Throw away disc guard

Si tú intención es enseñar a colocar correctamente el disco, al menos colócale la respectiva protección al esmeril y usa la respectiva llave para ajustar con la pieza el disco.

What about the disk guard? If you going to make saftey videos you need to be safe.

Cutting disk position is important and that sticker is danger that not properly stick it damage ur hand . First u must cheque power on button then plug and on.guard must for safety

Guard lagana bhulgaye kya . No safety

Why no disc guard?

No disc guard ! That’s the correct way to use the grinder for sure !

Und wo ist die Scheibenabdeckung bzw. der Handschutz? Ich selber hab mir schon mal geschnitten.

Use saftey guard first and use handle in stead of on body.

Sds-Clic is handy, doesn’t need additional tools to mount the disc.

the rotation arrow of the disc has its purpose.

Bro Machine safety Gard use..

Its okay to use back to back the cutting disc some angle grinder have rubber thier wheel placement

Very good👍

i think I have to go to manufacturers manual for proper instruction in mounting the disc

This is unsafe you sharing my friend

Where is your disc guard

A Mechanics Adventure

The most unsafe issue is using this angle grinder without disk guard, not the face of the disk grinder...

great tips.

Wihtout gard hataka

You will find that most people who use the grinder a lot have removed the guard. I think all the reasons for this can be summed up by saying the guard makes using tool very frustrating, So for these people (like me) it comes down to a matter of either avoiding the tool or using it without the guard. Also when the guard is on, I hate that I cannot see where the entire wheel is at all times, which makes me feel uneasy. For similar reasons, I take the guard off other power tools like the circular saw and table saw. I actually feel safer with the guard of and having the ability to see what the whole blade is doing. Lastly, I feel the direction of the grinder cut-off wheel is a major safety issue, because if it's in correct, the wheel can suddenly get full traction sending the whole grinder toward you while it's still spinning.

unsafe

Wear is the safety gard?

Great content !

very good information

Mester,hol marad a védőburkolat?

Good day Sir, Pwede po ba yung ordinaryong cutting disc na may butas na m10 sa angle grinder na may thread na m14?

My thee fingers were insured by using disc garud so do not use with out safety geares

POR ESO PASAN LOS ACCIDENTES SIN EQUIPO DE PROTECCION PERSONAL

cutting & grinding weel washer upon side very safety

Not using a guard is just plain stupid! One slip and you can do SERIOUS damage to your fingers!

Disc guard is the priority dude 🙄

Come-on boy, put Disc guard for safety, safety glasses too

thank you

thanks sa tip

வாழ்க வளமுடன்.nice working video

No remover guarda de protección.

Silently useful. Thanks.

what's kind of demonstration, agree to the disc, but where the grinder guard, unsafe...

Very. Good

Segurança em primeiro lugar.

Keep thumb on On/ Off Switch of Grinder. Do Practice to off it in Less than one second. Keep away from Body and Clothes.

good, thanks for share

Disks has no side today important is the protection

Think Safety Work Safely ✅

One more thing you didn't mount the safety cover.

What happened to the wrench used to tighten the disk?😊