Watch This video Before You Buy the xTool D1 Pro!!!!! 

WE COULD REALLY DO WITH OUT THE BAD JOKES i neeed precise and concise information

Love the video! It's always best to make friends with the voices in your head, but to be able to share him with us is next level 😉 To make videos is a full time job, and then some! Shame on the haters for not realizing the amount of work needed before companies ask you to review their stuff. Props to you for reaching that level of YT. It's a lot harder work than most realize.

Ugh. Anyone complaining about someone getting free stuff needs to get off the "woah is me for not getting the free stuff too". Make yourself a video channel, work, make stuff, and get enough subscribers the companies want you to demo their products. Stop worrying about what everyone else in the world is or is not getting. Just worry about your lazy little self.

Finished the vid, an loved it. Thanks for being honest with it, and for showing off all the stuff. That roller jaw is amazing! Glad you finally got a tumbler done!

I couldn't have made that pumpkin in 40 minutes on my scroll saw even if I went max speed! Really want to get one of these to add to my shop!

Good lord i thought i had a nightmare when i saw two of you on the screen. keep up the good work that looks like it would be fun to have before Christmas but assuming a small learning curve.

You earned your place in the world to heck with the you get free stuff. They didn't do what you did to get where you are and get to review these products. More power to you!!!! Enjoy your Lazer printers.

Thanks for sharing. Be well

Lord knows I could never deal with two of you. 😂 Great video. If ppl only knew all you put into your videos. I know. Love you My Forever! Signed, Shop Widow ps Thanks for the Halloween spirit. 😉

Good evening, Ken. Very interesting video. Well done.

So I've been looking at getting one of these xtool machines and am torn between this one and the f1 so far I noticed that the f1 has a air purifier do you need one for this one as well

Sir, how long did it take the tumbler to make? Thank you.

Wow that is a great looking machine lots of good stuff

Would you recommend this over the Atomstack X20 Pro?

Can it cut through thin sheet metal? Like 0.15mm nickel sheet? I am thinking about custom electrode shapes for battery packs type of use.

I am a new user for xtool d1 pro I need to do lot of wood cutting 3mm with very fine edges, sharp edges , corner ets The question is to get clean cut what should I try? Can I slow down speed ? The edges are very close to each other sometimes it just burn the whole wood Please guide me

Can this laser be used for stone and granite ?

can you raise the lazer legs on blocks to scribe/ etch something larger?

did you tried to cut 18mm pine wood with that laser?

It’s amazing

¡Hola! Tengo problemas con mi Xtool D1 Pro Laser. Lo recibí y lo probé, el primer intento fue perfecto. Luego, la segunda vez que lo intenté, no funcionó. El láser se movería, pero la luz del láser apenas tenía fuerza. Se movería como si estuviera haciendo el trabajo y tomaría la cantidad de tiempo que tomaría el proyecto, sin embargo, no había marcas en la madera contrachapada ni nada y la luz era muy, muy débil. Apenas podías ver. Envié un correo electrónico al servicio de atención al cliente y ahora ha sido una batalla de 3 meses o recomendaciones y cambios que quieren que haga, pero nada ha resuelto el problema. Seguí adelante y probé con otro cabezal láser que es el de los metales. Hice 1 placa de identificación que salió hermosa. Seguí adelante y traté de hacer otra placa de identificación... sucedió lo mismo... la luz era demasiado débil apenas visible, el láser se movía como si estuviera haciendo el proyecto pero nada grababa. No cambié nada en la configuración del primer proyecto al segundo. Trabajaba con escenarios materiales preestablecidos. Velocidad de potencia y todo fue verificado y aún nada. ¿Tienes idea de qué puede ser o cómo solucionarlo?

awesome

The problem with xtool is customer service, its non existant. I'm have a problem with the laser head jerking back an Fourth. I've send emails whth no response or help....

$399.00 at Walmart

Stop the bs. You’re getting free stuff and you’re not going to talk bad about a company that gives you free stuff because then they would stop giving you free stuff. Your opinion on these products have to be taken with a grain of salt.

Those people who bitch about you getting free stuff can build their own RU-vid channel and work their asses off to become popular enough for manufacturers to take notice.

Awesome video Moonpie....and Ken! 🤭 Not only are your reviews entertaining, they're also thorough and come across as open and honest. Plus you commonly have cool guests. 😆

Rubbing and caressing your machinery - hmmm ... someone needs to step up and gives this peep some loving !!!

Don’t let negative people bring you down and you owe them no explanations!! I love what you share.

Love your videos. You are a bit late with this one though. Got my xTool D1 Pro about a month ago and have been coming up to speed on it since then. You are correct, the potential with this machine is pretty much limited only by your imagination. My initial motivation for getting this was to be able to add signatures and embellishments to my turnings. It will definitely do that. When I get around to it. This has been another rabbit hole of project possibilities and things to explore. I also got the 1064 nm module to provide additional capability for engraving metal and plastics. I've done some tile engraving, metal business card engraving, cutting up to 1/4" plywood to make boxes and have experimented with cutting 1/2" plywood. I can also say that xTool support is very responsive; I had an incident and they were quick to respond and resolve the issue; as an aside I will add that the xTool Extra care is probably good insurance and worth getting. (DAMHIKT). Bottom line: Get this laser and you have entered a new rabbit hole of projects and possibilities. The good news is that you aren't going to be purchasing lots of new tools and accessories for the laser if you get the full complement you showed in your video and add the midwave module if you are wanting to do lots of metal engraving. I now have a use for all of those plywood scraps in the shop I've been too cheap to throw away, you can do quite a bit with them while learning to run the system. I'm building a holder for my Beall collet chuck system that will mount on my french cleat system using plywood I've had for years but that was too small for other projects. One thing I would recommend, especially if you get the D1 Pro -- get Lightburn software; it is a very powerful tool and lets you fully exploit the absolute positioning possible with the D1 Pro. Sorry for the length of the comment -- you just posted something that matched exactly with what I've been working on.

See, it's reviews like this that make me want to buy the product! Honest, straightforward, with product in use. I just sent this vid to my son and told him I want this thing!

Nice video. Put some sign-making app tape over your wood before you engrave it and you will eliminate scorching, put two thick rubber bands on your glass on each end and you will get traction on the rollers

2:00 🤣💀

And I appreciate you inviting me to stop by. Extremely interesting as always: twins being idiots 😂🌞

Love love love it ... your camera work is awesome! You seem like the kinda guy that would be great to have a beer with !!! Keep it up

I loved your work, but for 40 minutes of work plus material and the laser tools and selling for $ 30.00, I can’t see making money out of that x tools

Loved the video. I really think you just talked me into getting one. Hahaha. What’s the max thickness this thing cut through? Is that known?

On glass items try putting I rubber band on each side. You will get better grip on the rotary

Appreciate the review, sounds like you have previous laser experience. For those of us just starting out how long would you expect it to take us to start engraving after the initial assembly? Thanks.

will the xTool D1 engrave metal ie ... ammo cans, metal magazines and or real dog tags ??? I have a SMERNIT 5W and it will not looking to upgrade slightly ??? $$

Hello xTool guys. Loved the video. I have few questions. I have mac, is that ok to use with D1? Also, I am planning to use it in my apartment, can I? how noisy is it? Thanks

What software doe it use? I already have Vetrisc software for a CNC. Could it work on this laser?

I just got my Xtool As a new I can you tell us what materials and thickness of the material you cut.

I love how varied your vids are. You make my day!

I m new to laser machine and in market to use for making pop up cards from cardstock paper and some miniature wood pieces. I have Cricut maker machine. 1) Does it work on cardstock paper making intricate cuts or too strong for it? 2) Other tools like air assist or honeycomb is optional in such application? like to try first and gradually like to add accessory. 3) What is longevity of this machine? I read mixed review on amazon - concern before jumping to spend 1k+$ 4)Looking at xtool d1 pro 10w or 20w . I see diff of 500$ between them. Should I go with 20w ? Does 10W cut more intricate cuts then 20w? Quick reply (if u can) will be great as some deal may over soon by cyber monday.

Creative start.. could have done without the language. Had to move on

I got the xTool D1 10 Watt ( with air assist and the rotary chuck and event th fan and cover case thingy etc...) and I really like it... just after it arrived and I set it up the bought out the D1 Pro 20 Watt which gosh darn it I really like the colour and the extra power would b nice as well.

I love my Xtool! I have the D1 10 Watt (non pro).... I bought it to mainly replace my sandblaster for etched glasses... I still have not tried glass.... maybe soon! Thanks for awesome review!!

This one looks fantastic but conversion to CAD sucks!!!

Thanks for the video! Does this work on concrete? Thanks

can you tell me if you can make a line width .013' and .050" deep

I'm really enjoying the laser beam action buddy. Keep it up! Well done. 👍🏻

They show it cutting sheet metal on insta, I cannot believe that.

To make it better they could make it orange!

Great review. Can it work off an iPad or only off a PC?

Moon pie? What a time to be alive.

Boring

A great video both of you doing a great job .😂😂😂

Three questions: 1. Will this be able to engrave Aluminum cuff bracelets? 2. What's the black stuff you put on tumbler before engraving? 3. Do you recommend this over the longer ray 5? I've been looking into both

Great video! I have searched and searched for a video demo of engraving a wine bottle and the results. I've seen many videos of engraving drinking glasses and flat glass and mirrors. But none of a wine bottle. There is a video of engraving a full beer bottle. But the beer bottle explodes. I'm guessing it's due to the carbonation but they don't exactly say what the actual problem was. So I'm at a loss if it will work on a full wine bottle. I have a business that uses several sizes of wine bottles and would love to offer engraving services for customers. Got any advice? Or have you tried to engrave a dark green/brown wine bottle? Thank you in advance!

Great video. Quick couple questions if thats ok. Do you think it could cut 3 mm carbon fiber plates? Do the items being cut need to be on the same plane? The parts I need to cut are of carbon fiber, with a 7 mm raised wave profile. Think it would work?

That was a very informative video. Thanks for that, because I have been wondering whether I should get one. Curious of your recommendation between this and the Sculpfun S30 pro max 20W

What sort of ventilation is needed? The laser, if not used much, will it waste away and what’s the cost of a replacement? You mentioned CAD software….what other programs can I use to upload designs or create?

Great review, Ken. It's just not in my future as far as I can tell. That assistant of yours may be really handsome but he's not the brightest bulb in the pack (or laser on the machine). Bill

Good video, Ken. Thanks. Now that you have used more than one laser - if a person is on a tight budget, which one would you suggest?

you need air!

Helpful to all would have been: If you had total times of each run for some common items, with their area size, to calculate the cost to of running it.

Great video! I'm brand new to the laser cutting world. Which Starbond CA glue do you use for glueing the pieces together?

Who cares where it came from.. The review is all that's required and I'm happy with that as an xtool owner... Thank guys

hahahah best video for xTool D1 Pro laughed almost the whole video!! very creative and informative!!! ⭐⭐⭐⭐⭐

Oh just wait until it goes all Christine on you. You're gonna wake up with something engraved in your forehead.😱

Hi, can I cut transparent or othe colors such as gold acrylic/ plexiglass and metal such as silver 925?

Thanks for the review. I have Xtool D1 Pro 10W should've spent a bit more and got a 20W.

That first part is me when I get a new tool for the shop. Lol I name it and talk to it and whisper sweet nothing's to it.

Hi thank you so much for this video. What is the material and thickness you are using for the pumpkin?

Are u able to later etch 3d prints?

So where do you have yours set up?

@Moonpie Creations - I watched a video where a guy sprayed the reverse side of a clear sheet of perspex and engraved through that perspex onto the back side of it instead. My lower powered laser does successfully engrave through perspex, but I'm curious to know if this 'through' technique would work with glass too? 👍🏻‍

Oh and when you said it had jaws in it, you missed an opportunity for a killer dad joke. 😏

I would love to get one of these machines, but it will have to wait till next year. Moving this weekend, consolidating from a 3 bedroom house to a hotel room for a while, till me, my daughter & grandkids can find a nice house for us. Most of my crafting stuff will be in storage, and I don't plan to get anything new until after we find a place. I was looking at your fingers and didn't notice any deformities. How are they feeling?

I came on RU-vid for reassurance, I’m definitely getting one right now

Thank you for the review, I think this would be perfect for what I want to do

You’re having waaaaay too much fun! You work hard for all that free stuff!🤣😉

DUDE! Did you get two of them by chance? Excellent work with the video too.

Great now I need another tool. I might need a bigger shop. 🤔

I just purchased mine yesterday!!! Can't wait!

Thanks, good info. Seriously considering this laser!

Great review. I want one but I’m waiting until Xmas.

Beside himself as usual..

ok fellas- I am ready to purchase my XD1 Pro.....two questions and I thank you for helping all of us! I need to engrave shot glasses....they are wide on top and narrow at the bottom...what tool holder / roller should i use to etch a shot glass and the other question : is the light burn program recommended or needed for the XD 1 Pro? of is the internal soft ware sufficient? or does it even come with software? Im about to spend a lot of money and you guys tips would be appreciated! PS Happy New Year in advance! Dave/Texas

Thank you for making a great video! :)

Very Cool 🔥

I used tempura at first but quickly switched over to spray chalk. Its a bit messy but from the time you spray it on to the time you start etching is seconds. It dries in like 5 seconds and my etchings actual improved. When you've got a hundred glasses to etch, tempura wont cut it. It will take forever that way. I can have a hundred glasses sprayed in 10 minutes.