Watercutting Abrajet 

Hi mango tango, It is indeed:) Regards Anders, Watech

We can assure you that it's real:) We have cut up to 500mm thick steel with the Abrajet.

WatechNorway what is the difference between lazer cutting and this

Dear Arturo, Watercutting is a cold cut, laser is hot. Basically, when you use watercutting, it does not -create heat in the cut, potentially creating a Heat Affected Zone, or discoloration -Produce sparks (meaning it can be used in Hazardous Areas) Also, laser is hard to use in the field, and has a certain range of thicknesses it can handle. Regards, Anders, Watech

WatechNorway hello dear my email address mughalarifiron@gmail.com plz tell me my Riqwerd cutting thickness 1 mm to 100 mm plz tell me what’s price this

Elcin Bagirov lp

Hi, Mostly 600 bar / 8.700 psi was used for this video. Regards Anders, Watech

Hi Uriel, The Abrajet can be used in hazardous areas due to the fact that the cut is cold, hence it won't produce hot sparks. The cutting process is not done by hand, it is controlled remotely by the operator at a distance. This is to ensure the health and safety of the operator, as well as ensuring the best possible cut. Regards Anders, Watech

Dear Shinji, The Abrajet uses 80 mesh garnet sand as abrasive. Regard, Anders, Watech

In many cases it is, yes. Especially when we are talking about cutting something big out in the field, or under water. Regards, Anders, Watech

The blades are cheap to replace lol.

tran hau sí

Hi. If you are interested in learning more about the Abrajet, please visit our website, or contact us via the "Contact Us" form on our website. Best Regards, Anders

TheVikram2011 smh at least have and actually use the bathroom

not only man kill too woman

Bhaskaran M yeah

Bhaskaran M es solo agua

Hi, The Abrajet uses high pressure water, combined with an abrasive slurry to achieve the watercutting / blasting effect. There is no hot water or chemicals. Regards Anders, Watech.

Hi Tyson, The abrasive used is 80 mesh garnet sand. Regards Anders, Watech

Adeel Syed I never thought a thing like this in my life till i came to see on youtube.

Harry Makongwa maybe

And woman..

Harry Makongwa no shit Einstein!

Harry Makongwa I was saw your face ..you thinking about kill the people?

Hi Afzal, Power consumption, capacity and pressure levels differ based on which Abrajet you have. But the power ranges from 15-55 kW on standard models, and pressure levels go from 350 bar to 1400 bar. As for maintenance, the Abrajet does not require much maintenance. It's basically seals / valves / oil in the pump, and some of the valves in the slurry unit. And of course checking bearings on the motor. Regards Anders, Watech

Dear Mani, No, when using watercutting the cut is cold. So the material does not get hot. Regards, Anders, Watech

it actually uses very little water. only 20% of whats in the stream is water. The other 80% is the abrasives

The Abrajet uses approx 15 - 20 l/min of water, based on the size of the Abrajet. It uses about 3,5 kg/min of abrasive, which is 80 mesh garnet sand.

That's over a ton of water every hour.

Hello gimnazijci četrti letnik B In many cases, using the Abrajet is the best option for cutting whatever needs to be cut. The locations where the Abrajet has been used, water is abundant. Also, it really depends on the application whether or not the Abrajet is more efficient than other tools. Like every piece of equipment, it has it's areas where it shines, and some applications where it doesn't. Regards Anders, Watech

Hi there! The Abrajet uses high pressure water, with an abrasive mixed in the water via a slurry system. The abrasive used is 80 mesh garnet sand.

Hi asd asd! Watech AS is the manufacturer and developer of the Abrajet. If you have any questions, of would like to learn more about the Abrajet, please contact us at: post@watech.no Regards Anders, Watech

Hi Farg Emam, If you would like a quote for the Abrajet, please contact us at post@watech.no , and we will find the optimal solution for your application. Regards Anders, Watech

lacika861 usually 20k psi or more

Dear Lacika, The Abrajet comes in pressure ranges from 350 bar up to 1200 bar. Regards, Anders, Watech

WatechNorway wau thats a massive pressure . And abrajet uses only water or something else mixed with water??

The Abrajet uses 80 mesh garnet sand mixed with the water. The Abrajet used in this film is the Abrajet 600 bar.

WatechNorway yeah i was sure something goes with water , because water havent got enaught power to cut through the metal . Thanks for reply

Dear Tarek, If you would like to get a quote for Abrajet, please send us a mail at: post@watech.no Regards, Anders, Watech