@@logicalsupportandsolutions7741 Actually I have lot of questions 1. We have a computer program (.net) which is act like SCADA which need to be modified, we used Micro Logix - AB plc, We don’t have that programmer support, So not able to do anything. after watching your videos, I thought Add an additional SCADA program (In a separate window) for the required modifications, Will this work? One PLC two SCADA program? 2. Please post the videos for using PID controller programming for Proportional clamping, I.e. We are the manufacturer of Refinery valves, for leak testing purposes used water pressure in the testing stands, to this test valves are to be closed on both ends with hydraulic pressure, this hydraulic pressure must be higher than the water pressure, which means two pressure can be raised, One should higher than other & The different not to exceed more than 100Psi. 3 How many i/o available in SCADA system
1. which programmer support you don't have either .net or AB? 2.if you use two different scada for one PLC is not cost effective. 3.you can use multiple PLC in single scada is a cost effective thing.4.may I know what is the maximum PSI that you are going to use. 5 do you speak tamil? if yes mail me at aravinth2995@gmail.com i will give you a whats app no...
Hello, I am Usuf from Uzbekistan When I turn on the HMI, the timer is again at zero How can I make the HMI timer keep the last set value after you turn it off and then re-enable Thanks in advance if you help