Video showing how the bonnet lock works and few ways to fix it - example made for Peugeot 307 SW (2005). LINK: (Removing & Reinstalling Front Bumper - Peugeot 307) • Removing & Reinstallin... Hope it helps.
The video is old and continues to help! I already knew how the mechanism worked, but when I saw what I could see from the outside of the engine's front grille, it was easier to imagine pulling it out with a hook. And it worked, congratulations on the video and thank you!
You are worth your weight in Gold , just bought a 206cc and the bonnet would lock properly , I dropped the bonnet as state and locked instantly thanks a million for this video .
Thanks so much for this. Got close to breaking a window in desperation when the battery went flat and was central locked. I managed to get into the car bonnet first time thanks to your tutorial.
Hi, I have 407coupe and 2 times The workshop broke the bonnet release. They said the bonnet is heavey and bonnet release is from weak plastic. Do you have another solution ? Or there is a strong one.
Hi Ryadh, The cable is connected to the bonet lock and the lever you use to open the bonnet. All that remains is to find the clips holding the cable to the car along the cable lenght. I will add your request to the video list for future ;) Cheers
Hi Vykintas, I believe so. Nonetheless, it takes some agility and hand bending. You can remove 4 pins and two side screws with star interface. I do it at the beginning of this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nrG68DjnZ9w.html&lc=UgzoJLVOhivfv6cnGcN4AaABAg Then you should be able to bend the bumper a bit. Just be careful not to pull to strong. This is plastic in the end :) Cheers and good luck!
