WE ARE DONE!

Подписаться 19 тыс.

Просмотров 8 тыс.

50% 1

IUTBC SHIRT PRE ORDER HERE!
noworneveraus....
The final episode of our caravan renovation!
Remember to like this video, subscribe to our channel, and leave a comment if you are enjoying our content!
If you would like to support us by joining our patreon, head on over to / nowornever_aus , any support is greatly appreciated!!
If you want to buy some of our merch head to www.nowornever...
🔔Subscribe to the Channel and join us on an unforgettable journey through Australia's
hidden gems: / @nowornever_aus
✅Brands we work with!
👉Seeker Brewing
www.seekerbrew... (discount code NOWORNEVER15 for 15% off)
👉Custom Lithium
customlithium.... (discount code NOWORNEVER for 5% off)
👉 iCheck
www.ichecktpms... (discount code for 10% off is NOWORNEVER)
👉GrubRug
www.grubrug.co... (discount code for 10% off is NOWORNEVER)
👉 Beach2Bush
beach2bushaust... (discount code for 10% off is NOWORNEVER)
👉 Cowfish Technologies
www.cowfish.co... (discount code NOWORNEVER)
👉1Key Caravan
1keycaravan.com/ (discount code for 10% off is NOWORNEVER10)
👉 Mountain Air Dust Reduction System
www.cgearmats....
👉Meat at Billy’s
meatatbillys.c... (discount code NOWORNEVER for $20 off your order - Select Locations only - see website for details)
👉 Apricate Sand Free Towels
apricate.com.au/ (use code NOWORNEVER for 10% off)
✅ Stay Connected With Us.
👉Facebook: / noworneveraus
👉Instagram: / nowornever_aus
👉Website: www.nowornever...
✅ Recommended Playlists:
👉 CAPE YORK
• CAPE YORK
👉 Caravan Renovation
• Caravan Renovation
✅ Other Videos You Might Be Interested In Watching:
👉 REALITIES of WATERFRONT FREECAMPING OFFGRID in our RENOVATED 24Ft
OFFROAD CARAVAN
• The Unseen Side Of Off...
👉 4x4 24ft CARAVAN on TIGHT BEACH TRACKS to FREE BEACHFRONT CAMP
• 4x4 24ft CARAVAN on TI...
👉 LOW-COST FAMILY CAMPING / THINGS to SEE & DO TRAVELLING AUSTRALIA
in our RENOVATED OFF-ROAD CARAVAN
• LOW COST FAMILY CAMPIN...
👉 Full of FAILS! / Our new addition / Barramundi fishermans heaven!
• Full of FAILS! / Our n...
👉 Different things to do in the Atherton Tablelands / hidden gems / lost cost camping near cairns
• Different things to do...
=============================
✅ About Now or Never.
Hey Guys! We are Alex and Erin. With our 2 kids and 2 dogs, we live the caravan lifestyle, exploring new and exciting places off the beaten track. We like to get off the grid in our newly renovated 2008 Retreat Daydream and show you, that you don’t need the biggest, most flash gear to get out and explore!
Our channel also features 4x4ing, fishing, camp cooking, and tips and tricks to make caravan living easier! We'd love you to join us for the adventure!
🔔Subscribe to our Channel for thrilling adventures, caravan tales, and the beauty of Australia unveiled: / @nowornever_aus
=================================
#renovatedcaravan #caravan #aussietravel #caravanjourney #offgridcaravan #australianviews #offgrid
Disclaimer: We do not accept any liability for any loss or damage incurred from you acting or not acting as a result of watching any of our publications. You acknowledge that you use the information we provide at your own risk. Do your research.
Copyright Notice: This video and our RU-vid channel contain dialog, music, and images that are the property of Now or Never. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to our RU-vid channel is provided.
© Now or Never

Опубликовано:

12 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@craigpickworth864 9 часов назад

You could use the No Overtaking when Turning Vehicle stickers, on the black rear plastic

@stuartkcalvin 3 часа назад

Beat me to it.

@themacs488 8 часов назад

You need the yellow and black DO NOT OVER TAKE rather than the boring black plastic. Get them made same size and stick them on. They will take away the bareness, cheap and super easy to fit.

@paulwashere.2121 3 часа назад

The problem with getting them made is they might be illegal. The Do Not Overtake Turning Vehicle signage has to be a specific size and at a specific height and made from a specific reflective material.

@JanShephard 6 часов назад

Either add the black all the way across or add the checker plate in the middle

@Foolish_Paul_Australia Час назад

Awesome job on fixing up good ol' Bertha. 🙂 I agree with a lot of people suggesting the overtaking signs on the black sections. However, I saw a great sticker once that would also work on Bertha. It had one arrow point right saying, "Overtakers" and an arrow pointing left saying, "Undertakers." It's a bit of fun that might be something you'd like to try. 😉

@treeman3663 3 часа назад

Hi guys The whole Reno has been awsum enjoy your travels

@Anthony-and-Donna 7 часов назад

Congratulations, van looks great!!

@maxmckenzie2560 8 часов назад

I’m goin to Bunnings to get a “litre-metre-reader-thing” 😂 On a serious note I really appreciate the caravan plumbing lesson in this ep Thanks

@bradleyatherton4546 3 часа назад

Overtaking stickers will look good on them

@richardrhodes6259 Час назад

Well done guys always good to watch,one thing I’ve done similar to mine try filling with the caps on this will force the water through up to the breather which should come out water when full and I’ve never seen those counters so thanks for that😎

@filthyoffroadadventures Час назад

Hey guys. If you got another piece to go between so it’s black all the way across that would look better. Then put your supports stickers on it would look awesome.

@justcruisinwithmicksally837 Час назад

We did a water fill system on our van years ago which works the same as you have just done. The only difference was we used reinforced garden hose which allowed for easier routing of the hose in the confined spaces. You will find it will work very well without any issues. Great for when you buy your water from a water outlet where you pay by the litre.

@brigittedossor8167 4 часа назад

Great job but....love Erin's laugh😂😊

@aladslife7963 6 минут назад

Seriously Dude. I recall the first vid I watched and you were on Fraser and your awning collapsed in the wind. Although you struggled a bit, you had help and strapped it all together to finish your holiday. All I could think at the time was 'so embarrassing, the poor bugger'. I thought you really had guts to put that up for public viewing. I have watched every episode since. Seen you change vans, tell your story openly, honestly, and go from strength to strength. You cut off the locks, shared your family with us, and "IUTBC" taught us all in the caravan world a thing or two. Well done my friend. I'm old enough to be your father, be proud of what you have given FREELY to the caravan world. Keep up the good work. All the best to you and your beautiful family.

@lackatit 8 часов назад

Another option for the back of the caravan is to get stickers made up that say Big Bertha Thanks for a bit of an insight to the plumbing, also the Bunnings flow metre thingy 😅

@prospectorpete 7 часов назад

I think the black strip would look better if it went the full width of the van

@diannecain1 3 часа назад

Or painted white to match the van

@todddienhoff4223 9 часов назад

Hey guys , My is toddy and I’m 42yo type 1diabetic and am suffering with complications from diabetes which has me down to 42kg.I had to sell everything to pay for treatment and it didn’t work so I had enough money left to buy a 2007 Jeep Patriot so I’m asking if you can help me with some advice on what I should do to it so I can go camping and what would I need if i am able to come to the next camp for a cure.The nurses at the Mater hospital showed me your channel and they literally come and watch an episode with me while I get an infusion to make me smile and I’m so grateful that now iv found something to make me smile every single day and that’s catching up on all your past episodes.thanks so very much for your continued content and please know that they make me feel a little bit better each day.hope to meet you guys one day hopefully I’m able to camp for a Cure Much love Little Toddy D T1D❤

@DeneOLoughlin-ek9ee 3 часа назад

If you insert the internal pipe sleeves available for John Guest pipes at the join with the fitting you will get a much more stable connection less likely to leak.

@carolmcmillan1108 7 часов назад

Enjoy your travels with all your modifications 👌👌

@PeterLongworth-u8d 5 часов назад

I did the same with the bottom fill. I don't have a litre counter but I slow the flow right down when nearly full to give the water time to level out that way I don't think you would need to block of the Fillers. Love you're Videos

@jenafraser7470 6 часов назад

Add more stickers to the black panels as you travel 😊 then intentional and will match your drop down bench

@beercooler 6 часов назад

I have the exact same tanks in our Gator X and fill will the standard fill point and get about 85lts using the same litre meter reader. As you would know the Gator X has air bags and I raise the fill side of the van to get the breather outlet in the tank to the highest point.

@slowboat6021 36 минут назад

well done guys, enjoyed your rebuild immensely.

@brenjud 8 часов назад

Enjoy your videos. We will be coming to Camp for a Cure 25

@lynparsons6539 8 часов назад

Yay!! Yep we agree with the other comments snd reckon get the Do Not Overtake Stickers. 👍👏👏👏👏looking forward to your adventures, 😊 Lyn & Bobby

@SuperHosko 6 часов назад

Those plates look like johnny Howard's eyebrows 😂 I agree with previous comments though about the yellow do not overtake turning vehicle

@mattbirks7032 6 часов назад

Now my Sunday arvo is catching up on videos!! Good seeing you repping the best mechanic in the business! JGMS❤

@Kevo10 40 минут назад

When filling your tanks, you can put the locking caps on the gravity fill points. This should block off the filling hole. The breather vent goes around the seal of the cap to allow air into the tank. 😎

@jasonstratman1618 6 часов назад

I cant unsee the new eyebrows on the back of the van.... looks great!

@peterrutter3622 7 часов назад

Really enjoy your content guys. Like the humour and down to earth approach. Maybe to sort the water tank issue you could move the breathers to the top of the tank to eliminate any airlock. Hope this helps.

@davetunbridge6637 4 часа назад

Breather would work better if on the top of the tank and possibly if it was bigger. Also filling the tank is a bit like charging the battery, bulk fill initially then top up a bit slower towards the end to get max capacity. Agree with others regarding putting some “ Do Not Overtake Turning Vehicle “ stickers on the black plastic.

@ab7406 7 часов назад

Yes best to fill tanks from bottom and remove filler caps when filling ( air needs to escape and tank fills faster ) Cover caps to water inlet and mains inlet for dirt and bugs. White JG pipe ( reinforced ) is better for hot water system. 1/2in black pvc pipe would of done from filler manifold, same as draw to pump. Accumulator tank after pump are great

@sandrinalangston1112 2 часа назад

A cartoon picture of eyes would look good on the back of the van

@cathbp4089 3 часа назад

Going to miss the shed build. safe and happy travels. Could you paint the black plastic white?

@JacksonBiggles 8 часов назад

Could you let people know the size of the ball valve you use to block off the gravity feed inlet please that's a lot of extra water you're missing out on ! To save Bunnings trauma in the plumbing section.

@philipwest2091 34 минуты назад

Nice work guys, just thinking about your filling issue, maybe because your filler and breather are on the same end of the tanks and they are baffled, the flow volume is not allowing all the air out. Possibly try letting them sit for a minute or so after initial fill, then slowing the flow down and see if you can get more in. 🤔 may or may not help but worth a shot.

@georgenenadic9168 Час назад

Hi Alex, I think a full length strip of the same checker plate with the same width as the black plastic that you silasticed on the back of the van would look better than the two blacks strip's that you silasticed and screwed to the rear of the van Best Regards George

@Davwaltech 4 часа назад

Am working on the same issues you have with water tanks but I have one filler and one breather for two tanks which is a bit of a pita..just wondering what you will do when you want to drain the tanks? Good work on the van btw!

@Nosaesoh 5 часов назад

Decal 400mm Font “Do not Overtake Turning Vehicle” allows you to legally swing wide at an intersection. And cover the black plastic

@jimmyintel 8 часов назад

Definitely need stickers on the black panels

@Panda55 6 часов назад

I'm a bit confused. If you fit the ball valve to your gravity fillers how is the air going to get out of the tanks when you are pressure filling them? I don't think the vents that come up to your filler caps will be big enough to let the air out quickly and I've seen people split their tanks if they try to fill too quickly. Also you will need to make sure the air vent pipes don't have air locks from the water or you won't get air back into the tank when pumping from the tanks. Just a couple of things to think about hope this helps.

@JoshBarnes Час назад

I also fill my tanks from the bottom, to force the air out of the tanks, to prevent air locks.... I use the exact same flow meter from bunnings.... I have 2 95l tanks.... Hypothetically I should be able to hold 180lts, however my Max is 145l until my pump surges So I'm getting 72.5l from a 95l tanks.... I think there's just some usable space somewhere... I also use a Topargee Flow meter in my van. Glad its not just us 😂

@geoffcathcart7154 5 часов назад

You wreck it when Aaron was standing underneath the filler tap outlet . 😂😂😂 . Hay why don’t you put a one way valve on filler pipes instead of the ball valve thing .

@BazzMann48 4 часа назад

The inlet on each tank need to go in the top. At least near the top, otherwise, the pressure will eventually cause the tank to crack at the joint (like the example you showed at the beginning of the clip). Cutting the "eyebrows" on an angle (inside edge [/ \]), would improve the look. I like the "Give Way to Turning Vehicle" signs as others have suggested. I think this episode, was more interesting/entertaining than watching the Super Cars at Mt Panorama today. Cheers..

@kristinaobst15 4 часа назад

I'm a bit like you Erin, not really sure with the black bits. What about continuing it along the back so it's like a strip? I feel that wouldn't look so random

@paulwashere.2121 3 часа назад

Check your water delivery meter. I have one the same and it shows 18L when I fill a 20L jerry so it reads under. Yours might be the same.

@PaulJunor-sv9wn 5 часов назад

I have the same water tanks and the most I can put in is 75 litres. I think they are labelled wrong.

@krisbookham5629 Час назад

It might be worth making sure the litre meter reader is accurate with a known bucket size or equivalent?

@kerryscott2552 6 часов назад

kerry see you on the road somewere

@michaeldallimore8590 Час назад

Put a couple of yellow "Do Not Overtake Turning Vehilce" stickers on those black plates. Then it looks like they serve a purpose. Sorry looks like Craig below already suggested that!

@luckycountrytravellers6488 4 часа назад

Erin you won’t even notice the two plastic pieces after a while.

@Rosco_Y 3 часа назад

Enjoy you content…Think you need 3 x 12mm John Guest non return valves 1 for each tank to ensure you don’t lose any water if a tap leaks or gets knocked.

@brendomow1001 2 часа назад

2stroke exhaust bung to block the filler and easily removable if you need to fill remotely

@tim18118 6 часов назад

Alex, what’s the right silicone to use to seal the connections in the water tanks? About to do some mods on mine to add an extra tank.

@jasonconnell8619 2 часа назад

I’d suggest just turning the pressure down and filling a bit slower once it overflows, you’ll get more in those tanks. The higher pressures are too much and shoot out the filler/breather .

@johnboyle4355 6 часов назад

While you are at it, were is you DO NOT OVERTAKE TURNING VEHICLE, as you are over 7,5 Mts in length, I think it is a legal requirement.Put it on your new bit of plastic.on LEFT side.

@jamesfox653 2 часа назад

You could put your Do not overtake signs on the new black ‘eyebrows’

@Livedaybyday71 9 часов назад

Wicked shirts

@alanheather8441 7 часов назад

Are you happy with your suspension on the van or would you change to off road suspension

@jonnythunder92 2 часа назад

Erin....."you used to build caravans".....I think she has had a gut full.

@johnWestwood-vb8pp Час назад

on the black plastic strips put a do not overtake turning vehicle sticker on it

@Accolades70 6 часов назад

Noice...

@shanewalker2257 Час назад

Put a do not overtake turning vehicle sticker on the black plastic

@gregthornton3125 36 минут назад

Maybe attach some more reflectors over the holes.

@GraemeLowry-v9b 3 часа назад

What about a simple non return valve in your old filler lines.

@keithchad661 Минуту назад

I put ant caps on the blue hose fitting. there in the irrigation department

@petercruickshank9633 5 часов назад

Use checker plate

@causewecan514 2 часа назад

Put your DO NOT OVERTAKE TURNING VEHICLE Stickers on the black plastic strips on the back of the van. They should stick out like dogs 🏐🏀's & noone should say they didn't see them. Can get them from supercheap autos.

@diannecain1 3 часа назад

Paint the black plastic to match the van

@aroundtuit.australia 2 часа назад

They look like eyebrows You do need the “no overtaking stickers “

@claytonsmith3644 Час назад

Agree, why are the black plastic so big? Listen to Erin

@shanewalker2257 Час назад

Most water gauges are plus or minus 5%

@rickbailey1074 8 часов назад

I done the same thing with our tanks I fill them from the bottom but I just used our water hose that I had a metre of left over Wish you would have sliced open that split water tank to see the internal baffles because we have the same problem 95l tanks but can only get about 70-75 in them