We Bought a 2-Post Car Lift for our Driveway - Part 1 

If you're lifting your discovery up on the post lift put a tarpaulin over the roof first and when up secure with ropes to wall eyelets and or ground spikes, so if it rains you can continue to work, and leave overnight if necessary. Kindest Regards.

Loved watching this you two never cease to amaze me what you get up to its great to see 2 people really enjoying life doing what they love doing ( apart from the digging Christian) when your cleaning the mixer throw 2 half bricks in with a bucket of water and just let it run for 5 minutes it will clean itself 😀

Wow, fantastic job, those foundations will be excellent for your "two poster". As usual, this job so far carried out with ultimate precision. Nothing wrong with having your lift in the driveway, I think it will give you a lot of flexibility in doing your LandRover stuff. But remember guys the lift will be of no use to you if you ever buy a Toyota 😂

Add a little squirt of washing up liquid to the water you are mixing in your concrete. Makes it stronger. Very nice job.

Another brilliantly executed job.❤A bit of research and bravery and you can save a fortune on so called professionals. I built an extension on our kitchen around 8 yrs ago with very little experience. The structure rests on a concrete raft of 300mm with a central 150mm mesh( A393) core with 50mm of concrete cover over all mesh ends to prevent corrosion. When I looked into concrete curing, keeping the concrete surface moist for around 28 days was critical for the raft to cure and produce 2 calcium compounds for longevity. You can get a product called concure that you apply and this regulates the moisture release if you carnt water the surface. I dont think in your case any of this would of been necessary as its more about down forces and mass! Just thought I'd share this bit of information and what I researched before digging out 36 tons by hand into buckets!!! And you thought Germans were mad!!!

Such a smart lady.

I have interesting idea to pitch both of you. With your vehicle lift installed, it would be nice to add high powered floodlights in the ground, so when you are working under the car at nighttime, the job will be done quickly.

Now I know where I will service my Jeep while driving to Europe for holiday :)

I wish you were my next door neighbours. I cannot think of anything technical (or not so technical) that you two would not be able to repair or construct. If half my house fell down - "no problem but we might have fix it over three episodes." Another great video, thanks.

Just the thing for those body of job's absolute precision lift and lowering may be add inverter for the motor control for ultimate precision

Noooooo...... I am very jealous lol save your back now Christian and save going in the pit bravo! Christian and Vera is be lost without you guys much love from UK 👍🔥⚡😎 Any spare rooms for a fellow "knows nothing about Toyotas" lodger lol

At least when Christian fits a lift it will be done properly, I would also cut the back wall out of the existing garage to drive through to the other drive way. Can wait to see the progress.

A Garage addition/ renovation is needed! love this out of left field purchase. Installing lift in my shop has made for very happy car hobby!!

Great job, I prefer to call for a concrete delivery !!!

Good job Guys... the only thing I would have done differently would be the use a vibrating poker on the concrete, it gets rid of any air pockets and adds consistency and strength to a concrete foundation. On building sites foundations are always pokered.

Great video and not many RU-vidrs could pull off a installation of a two poster lift and make it interesting. Well done. Looking forward to part 2. I went for the four poster but regret it as it takes up so much room.

A great investment , that lift will make all future repairs and projects much much quicker and easier. I can't wait to see what car you get for a project

13:44 No No ! The K is silent, its Nipex. Trust me I'm an electrian in the UK and use them! Only kidding, I love how you both work together and how you can turn your hand to anything. I guess you hear it all the time, but you are a great, entertaining couple to watch. And mostly, thank you for speaking English.

Love watching these, you both have such an awesome dynamic! Very nice idea with the lift.

Anything I can add is to get inspected regularly and use a professional to do the first service on the hoist there after make sure we have a log book of all the services you do on

Decent stack of firewood you have there Christian and Vera, which will stand you in good stead when Germany’s gas supply gets cut off this winter. I’d love a two post lift, but my wife would never agree to such an installation. Lucky you!

Great job guys👍Next time I build something Vera can come on a working holiday as long as she brings her shovel🤣

My heart would want to do the lift in the back with that lovely technical drive to it. My head says Vera is right and having had to hand winch my dead engined 90 up our steep drive head wins 😁 Thank you Vera for the patch and stickers.

We think Vera will probably sew up some nice winter covers for the posts! Nice work!! Bob & Jill

Looks great! Not a silly idea at all. It's a fantastic selling point when you decide to move house. Of course, the new buyer would need to be a total car nut.

Something to consider is that the nuts which run on the Acme screw are a wear item and may need inspection or regular maintenance.

Man there's a lot of work and skillsets required for Land Rover ownership. I like it a lot... It will make life easier for you and for all of the friends you didn't know you had once they find out about this.

OMG you guys are totally crazy. But I love it !! I don’t think I know anyone anywhere that has installed a two-post lift at their home. Guys you have taken a simple maintenance pit to a whole new level. I can’t wait to see your first body off job. Greetings from London. Ty

We call that a “whacker plate” great entertainment guys.

Great teamwork, cannot imagine how hot it must have been for you guys with that heatwave hitting. Lift changes everything in a good way. The lift looks strong enough to hold the series 200 once you get all the gremlins worked out if you can find one that needs attention. I always held my breath whenever you guys were in the garage with that work pit. All the best from Landcruiser / Lexus owners in Dallas, TX.

With it being outside Vera will need to sew some canvas covers to protect it when not in use.

Looking forward to seeing the rest of the installation. Very impressive building work!

Great idea to have a two post lift. If I had the space to have one I'd have bought ne years ago, they make life so much easier. The two of you work so well together, much respect 👍 Looking forward to next week, take care.

You two are crazy in the best possible way and I encourage you in your delightful madness. I fully expect Vera to now sew a magnificent cover for the lift to protect it from the elements.

Great news, looking forward to see you not having to work on your knees and back.

Love the work ethic of both of you. Go and get yourselves a nice cold Beer .

Great video meanwhile in Britain we’d just bolt it to the block paving and hope for the best

Well done again guys , I used my 2 post to lift my Toyota 🤠 but it struggled with it so I guess an updated model for my Landrover ( my wife stitches so no help here ) 🏴‍☠️ great job again love seeing wats next cheers

Nice to see you both working hard together one thing though in the UK I think most people would have just ordered a load of ready mix cement then you just have to barrow it in if you cannot get the mixer truck in just a thought.

Make 2 canvas bags to slide over each post for the winter months

since its going to be outside vera needs to get the sewing machine out and make some covers for it for the winter or maybe a huge tarp to hang off the side of the house as a cover to work under

Putting in a lift on your driveway is a massive thumbs up from me 👍😁

Great video guys, I love how family come together. Christian it was great to see your dad helping you and with another project 😆, family support is always important. You are right, if Vera wants to dig you let her dig. Looking forward to the next video, take care 🙂 .

Great commentary Vera - Best You tube channel !

Just got back from Germany, cleanest cars in the world.

Vera wins! Yay good on ya. Very Nice!

I notice who is doing all the digging and at least you will not have to get on the floor when you have to fix something when you have got it all fixed up make sure everything runs fin before putting the car onto it ,because my friend who has a garage he got on and one side did not stop and the car was flipped over he had a lot of explaining to the customer . thanks for the video

Precision with concrete, wonderful. Such a great project. Every new house should have one🤣👍🏻

If only I had the room. Very precise mixing laying and cleaning. Great job.

OMG Where's my walkie-talkie?! Hahaa, invest in a Belle Megavibe (de-aerator) the concrete strength goes up by 50%...! Great video and team work.

We have a two post hoist inside the shed,but if you don't have a high roof,outside is great until it snows 😄 🙃

Brilliant stuff to watch.

Can you get a cat from the neighbour 😂 brilliant

Great to see your dad again. Can we get a fireside chat video between both of you please.

Glad you followed Vera's good advice. You should always follow her advice. Now you'll have to buy a Disco II to get full use out of that lift.

This is my dream ..and very useful when you have a Range Rover 😀

Since my youth, many years ago, I've always driven Lancias, and still do, a Thesis, and I'm not surprised at the high quality of the equipment you purchased from the Lancia dealer, same with lancia cars. Well done; much chocolate consumed!!!

Raise the roof of the garage and put the post in the garage!! I'm just jealous, I work on my Disco, across the road on the dirt.

Look at those beautifully stacked piles of firewood! ❤

Great teamwork guys. Enjoyed the video.

What great Vid you guys! Love watching every Sunday btw ...Cubic & not Qubic! sort of like Kneipex & Knipex 😁😁 Looking forward to seeing this lift a Disco!

Christian and Vera, I agree with Vera lift in the driveway especially if the vehicle isn't working, why make extra work for yourself in putting it out back 1/2way to Australia🤔 You mentioned not being able to put a roof over the lift working area, how about then an awning like on the side of a caravan that you mount at the appropriate height when vehicle is on the lift. You can pull it out from the building, so you have working cover and push it back when finished? Tony from Western Australia 🇦🇺

In the same situation I would be use scisors lift fitted in brick level. Anyway good luck!

looks a good job to me ,, i was a building site manager for 20 years so i do know a good job when i see one ,, well done digging is hard work

Putting it in the driveway with no roof means you can also lift a sprinter high roof without caving the roof in. Plus if you are working on car on the lift and it starts to rain, you are under cover. I reckon its a great idea.

A lift is such a help. Excellent idea. The scrolling nag nag nag had me laughing out loud. 🤣🤣.

Guten Tag. Sehr gutes Vidéo. Vielen Dank. Mfg. Tschuss

You both are so entertaining to watch. Kudos to installing a lift. We are going to do that in our driveway too. Fixing cars is fun.

Excellent video thank you.

A great video. This will make a huge difference to the jobs you can do. Looking forward to seeing it finished!

Lovely job. You could have always put another garage door in the rear of your garage wall and then put the lift where Christian wanted 😱it but as you say, that's where you repair cars anyway so it's the logical place where you have out it. I got myself a portable scissor lift for my home repairs. It means I can use it in the garage or put it outside for any body off jobs which I will be doing soon on my D3. However, I also fancy a 2 post lift and for the cost of a second hand one I'll probably get one too. 👍I wondered whether I could then fabricate a lightweight tent like frame over the lift supported on the post that raises when you raise the vehicle, with excess material on all sides that drops or folds out as you lift the ramp keeping you dry 😁👍I am sure Christian will be making something like that on his lathe soon 🤣🤣👍

I’m impressed 👍🧢🇬🇧

Well to you both

I really love this! I actually built a carport here in Holland to have a roof over my 3 ton scissor lift, which I use for my mall crawler! Great!

Good morning you two beautiful people. Love the lift.

Hi Christian and Vera, pretty sure you could fabricate a heavy duty ramp post sock to pull over the posts when standing idle, you don't want those beefy Acme Screw's being punished by bad weather. Good call Vera siting the lift where the action takes place and not compromising the work space, enjoy the channel and your Banter

Look out it body off repair time! So excited for you both and everything you do and share! Certainly an inspiration to thousands of followers! Well done!

If the post are not tied together at the top, I would have ran that reinforced concrete all the way a cross to both sides. She has a big smile! Have fun!

Nice job both of you, I hope the concrete is compacted enough for the weight of the Mall Crawler.

So interesting to watch everything you do is done to perfection

My god!! Lol. You guys just keep progressing. You will be stripping the discos down to the last nut and bolt in no time.... or at least in LR TIME!! amazing work guys. Keep it all coming.

Magnificent!! What a ‘tour de force’ the both of you are. Congratulations.

Hi guys, this is a great idea, and with great respect to Vira for insisting that she did the digging, I'm going to check if we in the UK can do this, then I'll put the idea to my partner that there will be some digging to do! If I survive this suggestion, the you will here from me again! ...again, great video 👏👏👏

Excellent job guys 👍very uplifting 😜 no seriously you work together so well, (on camera) 😜😂, that is an absolutely brilliant idea to have a lift, it will make life easier for you, next will be an awning to keep sun ☀️ and rain 🌧 off you. But your unity is really very important and in this day in age important. So looking forward to seeing it finished, stay safe and enjoy the sunshine ☀️

Thank you.

The exciting life of a land lover owner, building a repair shop and machine shop for "small" daily repairs Vs boring coffe machine unboxing video of a ladcrusier owner

Another great video and Vera has been an inspiration to my wife who helped me change the water pump on her Vauxhall (Opel) Corsa last week and even added a few OMGs as I was struggling to get the engine mount back in. Of course my Toyota whatcruiser still has the original pump on after 23 years. 😅

Hi Christian and Vera. You are the best, you know how to do everything, take care 👏💯

That’s cool! Should be listed in standard options for LR!

Great work we do it the same way out here in Jamaica koool

Christian, did you not regret 1 sec that you build that driveway so Thoroughly? Really like your video's; always make me smile !

Subscribed! You guys are so great. It makes me want to sell my car and buy a discovery 3 or 4.

this is super cool!

Check how much wear is on the brass nuts that run up & down the acme threads! Also there should be a safety locking device under the nuts in case the threads strip to catch the weight of the vehcle

Great job. Wish I had a 2 post lift in my driveway

Great idea !!!

Great, you can build a pull out awning from the side of the house like the ones on motor homes. Rolls out rolls in. 👍

Oh man, can’t wait till next episode.

Well done Vera and chris

Just love Vera ❤ What a fantastic video 👍🏻 Something different that fixing Toyotas lol 😆 Can’t wait for next Sunday 🤩 Keep safe & have a lovely week both of you cheers Stevie & a Big kiss 😘 for Vera