WE BOUGHT WRECKED 992 PORSCHE GT3 RS AIRBAGS DEPLOYED WON'T START! 

It would not have KILLED Porsche's engineering team to simply provide an access panel to get to the pyro fuse....

13:55 Dr. Vlad looked like he was in the club with the headlamp flashing like that!!! 😂

Man I swear your work is second to none

I like the care given to building these cars and respecting their value. Not many people would take off their shoes to get in the car and work!

I'm from Brazil, I live in Portugal and I'm very happy to watch your videos, especially with a car as beautiful as this one.

Excellent video as usual Vlad ! Each one gets a little bit easier to put back together ...

First GT3 RS rebuild video. LIT!!!!!

Looks like someone had a bad day @ the Race Track

4am beat the traffic, and still traffic jam 😅

Love it when you get into a Porsche rebuild 👍

Классно что дашборд можно снимать целиком! В первый раз мучался, а сейчас быстро получилось. Приятно смотреть, жду новую серию!

What an absolutely ridiculous place to put the Piro fuse.

Wow, you make it look so easy. All the best on this build 👌👍

Always positive, I like it, Im excited.......love it...please continue the vids....Vlad....😊

subbed! great content, found your previous Lexus video with the algorithm and now im hooked!

Good job Dr. ❤

Great content 👌 I've seen others get curtain airbags reset, like the belts. Could be worth looking into 👍

Sorry but Matt Armstrong and Tavarish both rebuilt one. Message Matt on best way to replace the fuse. It's a nightmare 😫

If that was going to be my personal vehicle. I'm rerouting that fuse to a better spot.

Классный выпуск с мини путешествием!

Love the Porsches content ❤ TKS !

Добрый день. Месяц назад разбил свою 2024 911 GTS. Небольшие повреждения спереди, косметические. Но сработали подушки на руле, панели и боковые с крыши так как ударил прямо в сенсоры возле фар. Даже фары целые. Страховая конечно пытается машину затоталить, все сошлись на мнении, что кому-то очень приглянулась машина. Пробег 243 мили. Собственно в чем вопрос: я вижу что вы просто заменили подушки в крыше, без замены самой обшивки крыши. Мне посчитали ее замену тоже. На сколько необходимо менять крышу? Там что-то повреждается при срабатывании подушек или просто у официалов по регламенту замена должна быть? Еще второй вопрос пожалуйста - заметил что у вас так же плохо закрываются двери. Я так понимаю при срабатывании подушек что-то срабатывает в замках дверей? Спасибо за ответы.

Thus gotta be the first proper crashed and getting fixed

What a car! Looking forward to seeing the end results! Big congrats on getting such an amazing car. You deserve all the success!

That car is the Alpha Male in the Porsche lineup..... awesome find Vlad!

Travail de très grande qualité 😮

Хороша вставка гарної Америки на початку! Так тримати!

Eagerly waiting for the next episode love the car Porsche GT3 RS and the colour. ❤❤

finaly nice project .

Glad to see you back on it Vlad and working on our favourites …. Porsche 👍👍👍

Send me some of that curtain, so i can put a physical piece of a Porsche on my vision board

You would think these German engineers would make it easier for someone to pull that pyro fuse out by putting it somewhere easier to remove.

best compliments

We saw that Pyro fuse it’s made by Volkswagen. It has a VW stamp on it ha ha.. ❤ VW - Porsche = same house 😂😂

Dr Flad , your are brillant , from germany🇩🇪🔥🙏

Pyro fuse! Ufff, that sucker is hard to reach! Good luck 🤞🏻Just remember where ALL bolts goes 😂 Edit: wow, your smarter than Mat! Bless the comments!

Gorgeous GT3 RS, and in my favourite color too! Great job on the dash removal, I've never understood why other RU-vidrs take the dash apart, piece by piece, when they could do it as you did, remove 6-8 bolts, and pull the entire assembly out as one unit. After all, the factory puts dashes in as one unit, so why not remove it the same way?

Amazing build, Vlad!!

Wonderful 🎉

you did a great job - congrats

I love keeping up with your projects. I also love Porsche so this is particularly interesting to me. Best wishes to you and your team.

You are a magician ✨✨✨

🎉 ciao buona giornata da Messina sei un vero professionista congratulazioni ogni mattina alle 5ti seguo❤❤

You are the man for the job my friend as usual.

Wow Vlad! What a project... not because it is too damaged... you have done lots of more complex stuff.... 991R and the GT2RS come to mind... but for that kind of vehicle. As you mentioned, you are the first youtube channel to repair a PorschA 992.1 GT3RS. I would appreciate if you geek out on this repair. Too little is know about the body of that beast. Are the front radiators mounted the same as in the 991.2GT3RS? Are you using the Piwis tester? Where are you getting the wiring diagrams from? What a project... I wish you could take that beast to the track and enjoy it properly as it was built to. A PorschA with purpose.

Love this build

Hello sir I am your fan

very nice vehicle my friend, I like it a lot. Once it's finished by you it will be better than factory, take care have fun. 🤗

Super work 👍

Hello gentleman, very nice car

Wowser! What a Beautiful Porsche! I’m absolutely certain that you’ll make that car look as if it were brand new when it’s done 👍🏻 sometimes when I watch the channel it makes me wish I had a car that needed repair so I could send it to you guys and watch my own personal episode 😂

대단하십니다

Love the music, love the Porsche more.

vlad the repairer.. nice work as always

love your builds.

Awesome project ! Love the car love the vid, love the channel ! Greetings from Bulgaria :)

Finally the car that I’ve long been waiting😊

Another perfect Porsche Bild Dr. Vlad!

Nice Car, Nice Projet Vlad. Bravissimi🇮🇹

Enjoyed !

Hi Vlad - you guys and Andre's channel are so far ahead of the rest of the RU-vidrs rebuilding cars. The bulk of them are enthusiastic amateurs compared to you guys. Good luck!

Blue seatbelts would match the shark blue color

I like that car 👍

Excellent work again, I’ve seen airbags re-packed and used again somewhere, when will you be at south OC cars and coffee next?

Change the color of the seatbelts to blue it’ll look good

Это просто восхитительно!! Ты лучший, машина просто отпад башки❤

Were do your cars go for sale and what type of money can you get for salvage to rebuilt titled cars?

Maybe colab with Matt Arm Strong. He also had Porsche.

Wow. AMAZING

dream car

Hey Vlad, I’ve always looked at body and interior work as a puzzle in a box some are 100 pieces and some are 1000 pieces. But they’re beautiful when they’re done. Since you do a lot of customization how would you do that ugly stock interior and make it more appealing and comfortable?? Great Videos and Thank You 🙏

Very good 👍

It is very busy on the road at 4 am.

I hope one day I will get this ❤

Another Great video !! Great to see your channel continue to grow. As for us we are plugging away at our 458 spider. Subs are slowly building, maybe we will swing by on a road trip one day. Can't wait to see your next video on this car!!

good video excellent congratulations 🎉🎉🇵🇹🌞👍💪

LNC💪

Wow! That car is nice. Hopefully the wife does not sweet talk you to keep it.😅

What make and model latex gloves is the tech wearing in the video?

I like it a lot

Definitely put blue seat belts

🖤

Nice

14:41 Porsche needs to simplify the way they design their cars. It’s ridiculous to go through all this hassle just to remove a simple pyro-fuse!

How much did you pay ? 125k?

good videos, but it would be interesting to see not only videos of super cars🙂maybe someday a volvo will come to a warm garage????😅

Sick car, can we ask what you paid for it in that condition?

Curious how much you paid, how much invested. Maybe disclose this on a future video. Also CON-sole, vs council 😊

20:08 Красавчик!!!)😂🙏✌🏽👍🏻💪🏻

How much in labor cost so far take a guesstimate .

Жду с нетерпением продолжения. Спасибо за русский язык в конце ролика. 👍

قناه ممتازه. ليه متحط الترجمه بعربي ❤

This is not a power fuse. This is a battery disconnect fuse.

Did you find out who owned this and what happened?

How much is the pyro fuse from the dealer?

Those wheels have to go

It puzzles me why they bury the pyro fuse in an inaccesible place stupid in my eyes . Great job lads but not for me lol.

Damn, give it to me

สวัสดีครับ

So Matt Armstrong did not rebuild the first GT3RS ;(