WE FIXED ALL THE DAMAGE!!!! ...But THE OIL is WAY WORSE Than We Thought... $38,500 McLaren (Part 8)

Подписаться 283 тыс.

Просмотров 40 тыс.

50% 1

Someone send me a new engine please
VTOMAN FlashSpeed 1000：bit.ly/3TzfZas
Use Coupon Code: VTOTINJA(50$)
We have some good news and we have some bad news - The GOOD NEWS is that the damage is fixed! We are ready to fire this McLaren up!! The bad news is, the oil report came back with some grim forebodings of doom. Hoping it runs and drives like Copart claims....
#mclaren #650S #McLaren650S #supercar #rebuild #project #repair #theInja #OilReport #Vtoman
INSTAGRAM: / the.inja.official
Support the Project: www.theinja.com
TikTok: / theinja
@TheInja

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 300

@TheInja 5 месяцев назад

Cant wait to fire this thing up next week. Really hoping it runs AND drives with no issues. Lets go 🔥

@louietramposch4559 5 месяцев назад

Nice cliffhanger. I hope you chased the old oil out with some cheap stuff first 🤞👽🔧🎬

@kings3803 5 месяцев назад

Let's go. A good oil flush and change that oil again after a couple hundred miles will make all the difference.

@michaelgiannone2192 5 месяцев назад

You need to run it. And change the oil again

@SomeJuanPlay 5 месяцев назад

Man that's going to be awesome!!

@fieldie 5 месяцев назад

Next week? Probably more like another 3 weeks 😂

@briantoga2626 5 месяцев назад

Some people put diesel fuel in oil, crank motor over, then drain diesel fuel out to clear out sludge out of the motor.

@GavinCosta2024 5 месяцев назад

i wouldn't try that with a McLaren lol

@ThatDude0990 5 месяцев назад

the better option is ATF. replace one quart with ATF

@69Dartman 5 месяцев назад

I used to put a quart of atf in just before I changed the oil to clean the engine a bit. I also would do the diesel with just enough oil to lube the engine at idle and run it 15 minutes to do a major engine flush then new filter and oil.

@laz1go286 5 месяцев назад

You are soo mean! How could you leave us with such a cliffhanger at the end..😂😂

@TheInja 5 месяцев назад

Gotcha good!!!!!

@laz1go286 5 месяцев назад

@@TheInja haha

@TruckerZRoadGangFan 5 месяцев назад

@TheInja no longer watching due to how this video was ended.

@addeats 5 месяцев назад

Dudeeee..... 😅

@TheInja 5 месяцев назад

@@TruckerZRoadGangFan because the video is over right?

@danharbun483 5 месяцев назад

Great video I would be looking at replacing the oil again once it be started and warmed up

@moosc 5 месяцев назад

I would have added cheap oil and amsol engine cleaner to first fill up then flush and redo

@TheInja 5 месяцев назад

Yeah that's the plan. But I have to run the engine first in order to flush it.

@fieldie 5 месяцев назад

@@TheInjayeh but that's the point in the cheap oil and flush, you run it on that first, then once clean, Then you put your good oil in.

@fixtravels1744 5 месяцев назад

1. MUST do another oil change after driving it maybe 100 miles but go ahead and add the additive before hand. 2. NEVER remove a transmission drain plug on any car before you loosen the fill plug first just in case anything happens with the fill plug at lease you still have some lube inside. 3. DAMN IT, I so wanted to hear it start lmao but no worries I’ll be back watching your next vid!

@TheInja 5 месяцев назад

For sure!

@networkcrasher 5 месяцев назад

I just came to the comments to suggest number 2. I would never drain a tranny or diff without making sure the fill plug came out first!

@Hrethgir 5 месяцев назад

Those bronze wheels are so nice looking on that car, colors are perfect!

@TheInja 5 месяцев назад

Agreed. So stoked to see the whole thing complete, very soon! 🙌🏽

@luischacon1524 5 месяцев назад

Bro I've seen most of your videos and by far this project is one of the best ones, honestly you inspire me brotha, "Build your Dream." Cheers, much success to you and everyone following along

@TheInja 5 месяцев назад

Appreciate you. Thanks Luis 🙌🏽

@V3XERZ 5 месяцев назад

Fantastic video! Just a friendly reminder to all, if you purchase the non-premixed coolant and mix it yourself in a bucket that has a gallon of water in it, it will save you money and you get 2 for the price of one!

@RetroDeltaDave 5 месяцев назад

Did you ever consider the reason why you only got 4.5 quarts of engine oil out of the engine may well be as there is still 3.5 quarts of sludge in the engine. It may be beneficial to put an engine flush in, run the engine per instructions, then change the oil and filter again, then possibly again at 500 miles or so. Just to be on the safe side.

@TheInja 5 месяцев назад

Absolutely will be doing that. 👊🏽

@bryanlogue8035 5 месяцев назад

Man, I wouldn't have taken the chance with the AC pipes. A.lot of extra work if they leak. Good luck with the rest of the build.

@KenWilcox-b5c 5 месяцев назад

If you do have a problem with the ac pipe, just fit flexi pipe from the lower straight pipe that will have sealed to the fitting the upper pipe had come from. This would solve your problem from a fitting to close to a bend that distorts the pipe and proves difficult to get a sealed joint. Keep it on mate. You’ve nearly done the said impossible.

@07bently 5 месяцев назад

Hats off to you bro you're good that's on my list of one of the coolest cars on the planet in comparison that lambo did not make that list. That's a very special car and the work that you have done is amazing

@mrtdiver 5 месяцев назад

That explosion when you plug in the battery always makes me laugh.

@ChilloutQ8 5 месяцев назад

For the A/C lines, you need to put a dye in the line and check for leaks using UV light

@hateju 5 месяцев назад

And if you run trouble of leaking hose clamps again. They make a lot better ones than those worm gear type clamps. Those tend to loosen over time. Great work fixing the mc👍😎

@TheInja 5 месяцев назад

Appreciate it! Yeah, looking back on it, I should have done premium hose clamps throughout....just didn't know those existed at the time really. 😅

@MrSuprachris 5 месяцев назад

My favorite RU-vid project at the moment. I'm going to be equally happy and sad when it is complete. Keep up the great work.

@69Dartman 5 месяцев назад

Oh man, missed this post but here now. Like folks have said you're getting so close. You going to keep it and enjoy being able to have another cool car to play with 👍 It's been a fun trip watching you on your journey to where you are now.

@ccm-racing 5 месяцев назад

Exactly my point, there’s no skill or saving in that. It’s much more of a win when you repair something. Good to see a different approach that’s not just disassembling and reassembling

@W4rH4wkXX 5 месяцев назад

Now that was some chucky oil!!!!! and you got pranked by liitle dude 🤣🤣🤣🤣🤣🤣 but in the end .... Inja gets the last laugh....AGAIN ....lmfaoooo

@TheInja 5 месяцев назад

Haha! All of the above! 🙌🏽

@9N3 5 месяцев назад

One of the best rebuild series I’ve watched. Definitely see you going far as a RU-vidr, can’t wait for the next one👌🏻

@TheInja 5 месяцев назад

Appreciate you 💯 means a lot. Looking forward to getting this thing finished!

@KenWilcox-b5c 5 месяцев назад

It’s always a good idea to fill your engine to the correct amount, use the cheapest oil you can find to the right spec. Run up your car to get the right temp and a few revs of the engine, or if possible a short run out. Then re drain the oil. If it’s still in a bad state or heavily coloured then repeat the exercise. This won’t waste good oil and clear your engine out. Don’t use engine flush as this can do your engine harm.

@ccm-racing 5 месяцев назад

Awesome progress bro. Nice to see someone repairing a car rather than just spending thousands on a load of new parts and chucking repairable parts out .

@TheInja 5 месяцев назад

Agreed. A lot of the content on RU-vid now is just "buy a ton of OEM parts from the dealership and slap it on"

@MrGMawson2438 5 месяцев назад

that oil sample was crazy

@Pittsburgh-412 5 месяцев назад

Its almost done bro!! Im pumped 😎

@TheInja 5 месяцев назад

Looking forward to dat first drive 😏

@fieldie 5 месяцев назад

For those of you that dont know already, the ending of this video is just his style of RU-vid video, always, ALWAYS, leaves the video with the cliffhanger, will it or wont it kinda thing, saw this ending coming a mile off! Get used to it folks!

@quadzilla2854 5 месяцев назад

Love this! The cliff hanger is awesome.

@TheInja 5 месяцев назад

Best part of the video in my opinion 😏

@fallowstrider 5 месяцев назад

Use nitrogen to pressurize system serves 2 purposes allowing a high pressure test a few hundred psi above operating pressures assures you of no leaks and the nitrogen acts as a drying agent removing non condensables from the system

@AdamMacleod83 5 месяцев назад

What a talent and what an inspiration you are, honestly, hats off to you 🙌🙌

@TheInja 5 месяцев назад

Appreciate you 💯

@CRAIG5835 5 месяцев назад

Tell me about it Adam. He is, I'm not.

@sanderkalso 5 месяцев назад

You should allways loosen the fill plug first when changing gearbox or diff oil

@mikemcguffin6528 5 месяцев назад

Hope and pray it works for you

@hmsjr0154 5 месяцев назад

If you think it’s good enough, then it’s not good enough. Keep at it until no move movement

@mrguillaa6601 5 месяцев назад

*Aweome video ! Would perform 2-3 oil change quickly to clean that engine ... Cheers from France*

@valespring 5 месяцев назад

Gotta get one of those quick jacks, my guy!

@releasedmike 5 месяцев назад

I’m not 100% sure but I think with everything being changed with regards to liquids the rear spoiler might need to be recalibrated and also the suspension might need to be adjusted but these things can only be done by McLaren because they use a special machine

@AaronBonBarron 5 месяцев назад

Glad you worked out those A/C lines! Don't forget to change the o-rings!

@TheRealAlpha2 5 месяцев назад

Yet another cliffhanger! But I'm okay with it, you've had months of anticipation, it's only fair to share some of that with us too.

@TheInja 5 месяцев назад

Facts

@nmlracing9803 5 месяцев назад

Legendary episode!

@coolissimo69 5 месяцев назад

I was so anxious waiting for you video Inja, hope nothing bad with your motor I am just commenting before watching he video.

@MrAmoRay 5 месяцев назад

Dawgnabit!! you did it again with the cliff hanger. lol!!! shame on me this time.

@Skiridr22 5 месяцев назад

You should change the oil again after running it for at least 2 days, to flush the system out

@wags9777 5 месяцев назад

That unknown coolant line is probably a windshield wiper fluid line

@TheInja 5 месяцев назад

Nah I know where that one is.

@Skiridr22 5 месяцев назад

I have a lot more respect for you bro, I would have lost half way through all that pluming

@TheInja 5 месяцев назад

Took a lot of focus, that's for sure. 💯

@sammaw4925 5 месяцев назад

I am really hoping for you, but I ve never seen oil so bad come out of an engine that was ok. Fingers crossed this is the first

@grahamcarr5788 5 месяцев назад

Absolutely brilliant buddy,can’t wait to see the next video👍

@Pittsburgh-412 5 месяцев назад

Dude you better not make us wait so long to see this thing fire up. We will not be happy 😂

@TheInja 5 месяцев назад

Coming this week 😏

@jakecherni4073 5 месяцев назад

should’ve dad got some cheap oil, ran the car for like 10-15 minutes, drained it and maybe did that one more time or did the actual oil change then

@19mati67 5 месяцев назад

Always remove the fill plug on the diff/trans, just in case that you can't open it after you emptied it.

@TheInja 5 месяцев назад

Ooo yeah good call

@glennarnold3970 5 месяцев назад

the oil should have been drained when engine is up to temp and you have to remember the mclaren engine will have high tolerences in it so you would expect a little contamination as the car would have been beat on as long as the next oil changes there is less contamination then regular oil changes will help but glad to see you wrenchin on it again cheers from down under

@my31and37 5 месяцев назад

Sad to say dude, if that engine is not hurt it will be a miracle. Horrible sludge, bearing material..and water does not bode well for it. Fingers crossed!

@TheInja 5 месяцев назад

Agreed. 🫠

@u.p.tinkering 5 месяцев назад

Love your videos and this series is killer Inja! Can't wait to see the finished car!

@kpraz 5 месяцев назад

44:30 the best part

@toxiclovept 5 месяцев назад

So this cliffhanger is the nuclear explosion we heard about in the States, from Europe...

@compactliving08 5 месяцев назад

If i where you i scould change the oil after 5-10 miles and the BMW oil filter. Every were in the engine you have that bad oil. Maby 1 liter total in diffrent aerea. Canal in the block or crankshaft all the tubing IN the engine.

@TheInja 5 месяцев назад

For sure.

@arthurlombardo6988 4 месяца назад

Ive seen you in town. I have the red huracan. You may have seen me too. Good luck with your build bro.

@TheInja 4 месяца назад

Yeah I remember you. 👊🏽 Thanks man!

@ravens101100 5 месяцев назад

I really like the rims that came with the car

@TheInja 5 месяцев назад

$400 and they're all yours 😆

@turboboy0 5 месяцев назад

i don't remember seeing any videos of you owning a KAWASAKI ZX14. it appears to have a small stretch and a 2 BROTHERS slip-on exhaust. mine was stretched when i bought it but i have put it back to stock length.

@H4HDJD 5 месяцев назад

Looking good

@fieldie 5 месяцев назад

4:25 That huge split in the carbon fibre tub, top left in this timestamp, doesn't bother you? Bothers me! I hope you get that checked bro!

@adcampo7601 5 месяцев назад

I'd consider once you get it running to change the oil again.

@TheInja 5 месяцев назад

For sure

@josh635 5 месяцев назад

Keep up with the uploads bro! i can see you blowing up in the automotive scene in yt with your discipline

@TheInja 5 месяцев назад

Appreciate you!

@BUILDYBUNCH 5 месяцев назад

Igniting the journey ahead!

@TheInja 5 месяцев назад

🔥🔥🔥🔥🔥🔥

@cainagomez2722 5 месяцев назад

You must use an engine flush, then after that put the oil, because you will just waste your good oil with the sludge

@lear60man 5 месяцев назад

Liqui Moli engine flush at the very least. The metallic particles could be from break in ......or abuse. Either way, they need to be flushed out.

@Emadavid 5 месяцев назад

It is low but not low enough to not have any wheel gap so I bought some kw springs for mine 💪🏾

@TheInja 5 месяцев назад

Yeah, may need to lower it! Would look WAAAAY better.

@TheInja 5 месяцев назад

Send me a photo of yours and the spring kit you bought for yours! injamotorcycles@gmail.com

@Emadavid 5 месяцев назад

@@TheInja sure can brother. The biggest selling point to me is that you can modify the height to your liking

@hamskyxxx 5 месяцев назад

Let's go! We've been waiting bro.

@CRAIG5835 5 месяцев назад

I seriously question why I was put on earth when I watch your channel. You are so multi talented, and I am not, even just a little bit. Good onya chap. Inja is like a wart, he grows on you.

@BillGriffin77 5 месяцев назад

Youve got talent too, can be hard to realize sometimes

@TheInja 5 месяцев назад

@@BillGriffin77 hard work beats talent!

@CRAIG5835 5 месяцев назад

@@BillGriffin77 Dead correct, hard to realise. I am 67 and never had a talent for anything to be fair. Nice positive words anyways, Cheers.

@StephenTozer-e1w 5 месяцев назад

Did you flush the engin before addinf the fresh oil?.

@Nick210 5 месяцев назад

You should absolutely do another oil change after you fire it up.

@TheInja 5 месяцев назад

No doubt!

@howiefeltersnatcher 5 месяцев назад

You should also use a cheaper oil since you’re just gonna basically flush it and change it right afterwards

@TheInja 5 месяцев назад

Yeah, it's what I had at the time. I'm not too worried about it, just will be happy if it runs right. :) worth the extra $20 of oil if so!

@navyvet9311 5 месяцев назад

Gonna wanna run that oil through it and change it a few times to clean all that nasty sludge out of the system.

@TheInja 5 месяцев назад

Yep for sure!

@derekcrowe2886 5 месяцев назад

Hope that aluminium is not an issue and she runs sweet. Car needs a name.

@TheInja 5 месяцев назад

Got a suggestion? 😏

@derekcrowe2886 5 месяцев назад

@@TheInja Not really but there’s a Clare in M Clare N 🤷🏼‍♂️😁

@TheInja 5 месяцев назад

@@derekcrowe2886 that's actually the cutest thing I've ever heard. Might just stick

@derekcrowe2886 5 месяцев назад

@@TheInja 🤗

@gtd6288 5 месяцев назад

I'm pretty sure that extra AC line is just a drip drain to ground for condensation. Every car has one.

@monkeybase01 5 месяцев назад

I would change the oil again after it had a few some heat cycles.

@TheInja 5 месяцев назад

That's the plan!

@at20rule 5 месяцев назад

Your use of pliers and crescent wrenches to tighten nuts and bolts are cringe in a funny way but from one salvage car builder to another it's all love for ya brotha!!!

@howiefeltersnatcher 5 месяцев назад

You need to buy some engine flush Ams oil makes a good product you add it get the engine to operating temperature and then change the oil again spend the money on everything and do it. It will help get all that buildup and sludge out. Then drive it 500 miles and change the oil again try to save the engine

@denisfitzgerald3474 5 месяцев назад

You really need to flush the engine first. Please please please don’t just change the oil and think that this will be ok. Even if the oil sample is from the bottom of the drained pan there should be no metallic contamination. Im keeping my fingers crossed for you but it looks like there is some damage due to water contamination in the oil which turned it to sludge! That gloop will definitely not have lubricated the big end bearings!😢

@TheInja 5 месяцев назад

For sure. My plan is to fire it up on all the fresh fluids, make sure it runs and drives, take it for a small drive around the neighborhood, then another oil change.

@shockw6ve570 5 месяцев назад

Ahh yess. A cliffhanger now i cant think of anything else than if it runs😂😂

@chrishaug 5 месяцев назад

Google mclaren 12c engine issues. Tavarish did something on it, the piston arms are weak and break.. So metal shearing could be because its getting loose

@TheInja 5 месяцев назад

Saw dat

@Nick210 5 месяцев назад

That happens when you feed more power to a stock motor.

@chrishaug 5 месяцев назад

@@Nick210 it happens to stock engines also.. Under dimensioned engine parts.

@YusufPetersenCPT 5 месяцев назад

This is why all engines should have a dipstick even an idiot can check it atleast and see if its low or how bad it is

@larryzollinger2209 5 месяцев назад

You pressure test the coolant system but not the AC system ? You should always pressure the AC system with at least nitrogen or even just air to see if the lines are leaking. Refrigerant is too expensive to use as a leak test gas. Very surprised

@MrRock861261 5 месяцев назад

Iron and aluminum could be from the accident if they drove it around or moved it.

@kelvindavid722 5 месяцев назад

What a cliffhanger! 😂

@TheInja 5 месяцев назад

Only the hangiest for you guys 🫶🏽

@Fncy_VW 5 месяцев назад

Cool video up until the end

@TheInja 5 месяцев назад

Haha new video this week to continue it.

@MrGMawson2438 5 месяцев назад

Cracking job mate I remember it

@MrHemikid426 5 месяцев назад

Them compression fittings need to be tight. I used a vice to hold them when I tightened them.

@Daniel_Blake 5 месяцев назад

In the words of my people. Wanker!. Such a cliffhanger. Great stuff so far.

@TheInja 5 месяцев назад

Hahaha

@Torrrees 5 месяцев назад

Epic ending lol

@MrGMawson2438 5 месяцев назад

See you next time

@zx1100a1 5 месяцев назад

Yay. Hey Inja that's a nice shirt you got there.

@patcaza6166 5 месяцев назад

i wonder how many months he had to wait for it to arrive...

@TheInja 5 месяцев назад

@@patcaza6166😅😅😅

@patcaza6166 5 месяцев назад

@@TheInja you think its funny ? man, wow...

@TheEngineeringDutchman 5 месяцев назад

FFFf yeaaaaaah, I use to watch you a couple years a go with the chinese electric motor bike. them for som reason I moved on to other channels. This McLaren build is so awesome I found your channel again!!!! keep it going!!!!

@TheInja 5 месяцев назад

Let's gooooo 🔥 Welcome back!

@TiffCat 5 месяцев назад

bro you need to run through those multiple oil changes back to back to flush it now. don't wait. buy another load of cheap oil and run through then put something decent in it.

@TheInja 5 месяцев назад

Yeah for sure. Will be doing that when I'm back on the McLaren on Monday!

@bergrud 5 месяцев назад

You really should not use those Screw on cramps for coolant pipe They are bot exactly round and do not flex. Use the expandable ones. Its so many on this car that you are bound to have a nightmare.

@TheInja 5 месяцев назад

Time will tell...already together so 😅

@suhilalremagah5525 5 месяцев назад

Is that leak from the clutch fluid ? I think the whole bottom is cover with oil.

@TheInja 5 месяцев назад

There wasn't a leak that I could see? I've been adding and removing fluids a lot under there.

@suhilalremagah5525 5 месяцев назад

@@TheInja great 😊

@suhilalremagah5525 5 месяцев назад

I want ot mention that you need to bleed the whole suspenion I saw many people do it

@TheInja 5 месяцев назад

Yeah, still figuring out how.

@suhilalremagah5525 5 месяцев назад

@@TheInja The guy that I saw he went to the dealership it self

@yamahasnowmoblielove 5 месяцев назад

Needs some amsoil engine flush

@MrGMawson2438 5 месяцев назад

You should carry one of them VTMOMAN in the Tesla frunk

@billakers6082 5 месяцев назад

It's time for Marvel Mystery oil.

@TheInja 5 месяцев назад

Got some on the shelf!

@isaiahsmart9933 5 месяцев назад

Um sir I need to know who made that montage music(about 18 mins in)

@fredcailloux2526 5 месяцев назад

You "mother flower!" 😆😂😂 You need to do a compression and leak test ASAP and cross your fingers. Flush that engine with cheap oil let it run then add some liquid molly engine flush, let it run a bit more ( I think they say 15 minutes on the bottle) and repeat again until It look amazing! Good job again young man!👍

@TheInja 5 месяцев назад

Hahaha