We Have to Have a Window in the Wardrobe

Подписаться 390 тыс.

Просмотров 126 тыс.

50% 1

Some rules lead to interesting design decisions. But in this case, it works.
Check out Richard's RU-vid / @livingimprovements4382
Music by Dekobe (great producer) / dekobe
...
Donate here if you want to help the channel, thanks!
www.paypal.com...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this RU-vid channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrown...

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 205

@pcranebmw 5 лет назад

Goldblatt BladeRunner works great for scoring both sides of the gyp at the same time. A lot faster than a razor knife. Excellent videos. Thanks for sharing 👍👍

@matthewhorsley1448 5 лет назад

I genuinely don’t think it’s possible to pick up a drill and not pull the trigger straight away

@ScottBrownCarpentry 5 лет назад

I do it every time

@DayOff1 4 года назад

haha

@thaner77 5 лет назад

A t square for drywall can be your best friend if you got a lot more to do :)

@livingimprovements4382 5 лет назад

Talked about that while filming this. Think ill get one!

@philipdevenish9416 5 лет назад

When you fit UPVC windows deglaze the fixed pane to make it lighter,Also as the outside skin is masonry you only need silicone as waterproofing!

@duncanvlaar8017 5 лет назад

You guys should start your own building company, you guys seem to be good friends, great builders, fantastic craftsmen and work great together..

@Asbjoern 5 лет назад

They have their own building companies?

@duncanvlaar8017 5 лет назад

@@Asbjoern combine the living daylight out of that...

@davidespinozareyes2150 5 лет назад

Can’t wait for the next one brother

@lifeanywhere 5 лет назад

You guys can buy drywall sheets that large? Nice!

@alexbarber1468 5 лет назад

Love ya videos, keep them coming 👍

@benrunciman2376 4 года назад

Hey Scott, the mirror , is it from Trade Depot?

@ZeyadLT 5 лет назад

Your a master man

@granthyslop4404 4 года назад

Are lime yellow in NZ

@chrislewis3322 5 лет назад

Enjoying the Videos Scott from Australia :) Question if you have time Wardrobes do they normally have a lintel across the top? as i want to remove the doors and middle brace to open it up without the wall collapsing

@leerolfe5332 5 лет назад

You guys get cheap diesel!!! £1.25 here :( hehe

@oh7624 5 лет назад

Its a lemon g

@rjdestiny-mx4ir 5 лет назад

Is it typical in new zealand to always hang your drywall with a vertical seam?

@forte2523 5 лет назад

you can screw 10 boards with 9 seams or two with one, which is going to be quicker to do and easier to plaster?

@rjdestiny-mx4ir 5 лет назад

@@forte2523 Im a visual person so everything you saif doesnt really help me understand what your say. Here in the states ive been taught that the fewer vertical butt joints you have the easier it is for the painters and mudders to hide the seam. Its more work to hide a vertical seam. A horizontal seam runs the length of the wall which is less noticeable to the naked eye

@_Handrolo 5 лет назад

@rj061492destiny Most of their sheets are hung horizontally, man. That is the best way for taping and bedding. It leaves less seams if you use the 4'x12' and 4'x16' sheets as opposed to the 4'x8' sheets.

@allanpennington 4 года назад

Its all about critical light. Especially falling on the walls from a window across the board. A vertical seam no matter how well its prepped will be more obvious than a horizontal one.

@jgoliew272 5 лет назад

Hi there, may I know what is that sheet you put under the shower tray?

@livingimprovements4382 5 лет назад

We call it Tile and Slate underlay. Its essentially a compressed concrete board product that wont rot.

@DiscoFang 5 лет назад

Living Improvements Uuhhh that's not quite right. Tile & Slate can be damaged by water and it can indeed get mould growth. It needs to be water proofed. Common misconception that it's like Hardies exterior panel. It's primary reason for use is to prevent movement & expansion affecting the waterproofing & tile adhesion.

@livingimprovements4382 5 лет назад

Cassette Walkman ah that is good to know, I thought it was to aid in handling moisture but know it gets waterproofed as well. Thanks for the info.

@Solveitall813 3 года назад

Lemon

@canusdominici 5 лет назад

No wall insulation...."???

@locominyana8916 5 лет назад

They're not exterior walls, they're just partitions with another wall in the other side.

@MrBiddo 5 лет назад

responsible builders would make sure the places insulation and what not were brought up to 5 stars to reduce energy consumption and carbon footrprint

@Asbjoern 5 лет назад

If the owner isn't paying for it that would be stupid.

@MrBiddo 5 лет назад

@@Asbjoern given the owner is the builder seems your point is misinformed.

@livingimprovements4382 5 лет назад

And i definitely would if money wasnt a problem but this has to stack up financially and sound transfer on these units is very low so it wasnt a priority. Id prefer to put that money into improving another area of the apartment.

@MrBiddo 5 лет назад

@@livingimprovements4382 I was more referring to the heating and cooling requirements. Completely understand the position but again the point is responsibly... The money spent on insulation would pay for itself many to times over both as a direct financial benefit to the potential new occupants (likely increased marketable value for your sale) and MORE importantly go to reducing the energy and thus environmental impacts long term.

@benjaminmaier1 5 лет назад

$2.17 per L of petrol!!!! What is the world over there

@ScottBrownCarpentry 5 лет назад

That's the cheapest place to get it too 😂

@DiscoFang 5 лет назад

Road & other taxes are loaded on the pump price here in NZ. In the US some of those same taxes are paid & charged elsewhere. As one example are the Accident & Emergency (ACC) tax portion to help fund the road based injuries entering the hospital system here in NZ. That system is essentially free here. How does that compare to USA?

@DiscoFang 5 лет назад

Ben Maier The actual price of the fuel is only 32% of the pump price. Even if the oil barrel price dropped to zero the pump price would still be up around $2. (Refining and transport still being a cost).

@benjaminmaier1 5 лет назад

I’m in Australia. It hovers around $1.25-1.70.. I believe our registration is more then NZ with all of those other chargers etc

@DiscoFang 5 лет назад

Ben Maier Yes I hear your vehicle annual rego is crazy. Average petrol vehicle here in NZ is $75-130 ish per year.

@geor3260 5 лет назад

Missed an opportunity to drop a card with your RU-vid channel on it in that hole in the wall... could have gained a sub in like 30 years.

@DICEGEORGE 5 лет назад

the hole in the wall will let through sound, i'd have bricked it up

@DiscoFang 5 лет назад

George Miles Yep. Open a window a hair's width and see how much effect the tiniest gap has on sound transmission.

@lawrencek458 5 лет назад

I work in the IT field...... nothing close to carpentry but, I can't stop watching your videos. 👍🔨

@salotesua9480 5 лет назад

Same. Weird huh. 😀

@TheRealNosferatu 4 года назад

Get some tools and do some woodworking, brotha! Great hobby :)

@vijaysaviopinto 4 года назад

@@salotesua9480 Same here

@danieljulian4426 5 лет назад

longest drywall i've ever seen!

@matthewhall435 5 лет назад

Your a absolute legend for cutting your flush boxes out to many lazy boulders not doing it these days 🤙🏼 live the bids bro keep them coming

@SuperMasseyferguson1 5 лет назад

Hey Scott! Allways a pleassure to watch! Have you heard about the new Makita 40v yet? Looking forward to that 😏

@judge462 5 лет назад

I seen that the other day ay! what a jump. 3s 4s 5s then 6v came out last year and i was like farrkkk then they go straight to 40 lol

@ScottBrownCarpentry 5 лет назад

I saw that the other day. I'll have to try that out

@BunkoFlakes 5 лет назад

I've learnt so much from your video and I only just discovered your channel. I'm currently studying carpentry so I'll be sure to search your channel for anything I need. Keep it up.

@alexrains1893 5 лет назад

I like the window in the wardrobe. Every wardrobe should have one.

@crossfitconfessions 4 года назад

Hi Scott. The pedal You used to lift the plasterboard, where’s that from? Haven’t seen one before - I normally use my pry bar to lift, but this one is nice. Thanks for all the videos and for your birthday greeting on my Instagram @squareplumandtrue :) Grretings from Denmark 🇩🇰

@seannewman8949 3 года назад

"who cut that?" Me every time something fits first try 😂

@BroJared151 5 лет назад

Why wouldn't you insulate the block internal wall? Who wants to be heating the neighbours room?

@osianmeilyr89 5 лет назад

Also there's sound deadening to be thinking of. A single skin block doesn't stop a lot.

@BroJared151 5 лет назад

@@osianmeilyr89 exactly! I'm putting sound absorbing insulation on my walls currently and what a difference to heat and noise reduction

@livingimprovements4382 5 лет назад

Its a question of cost. Ideally i would but i have been on this site for a few months and noise between the walls has not been an issue. I havent heard any noise from neighbours and ive been in their appartment with my stereo going and i couldnt hear it so decided that was a place i could save on costs.

@MrTooTechnical 5 лет назад

even if those nails are made for no squeak applications. they will. only use screws in floors. lates

@skusey1231 5 лет назад

dave daved always nail cement board mate..

@MrTooTechnical 5 лет назад

@@skusey1231 no no, ceramic coated SCREWS. :) lates

@lanewilson181 5 лет назад

It's getting tiled and they glued it if there isn't any movement it won't squeak

@MrTooTechnical 5 лет назад

@@lanewilson181 wheres the glue. anyway, no nails please. only screws. lates

@darryndewar 5 лет назад

@@MrTooTechnical you can see it for the second sheet at around 7:28

@slowly_radish8374 5 лет назад

Building is so dif there- thanks for the good explanations! I knew you wouldn't sheetrock without insulation or vapor barrier on a block wall. Whew! 👍👍

@kevinmccormack7659 5 лет назад

I've been past that place on Manakau road this morning

@allanpennington 4 года назад

Re req a building consent @ 9:18 In NZ's current building Act there is a Doc for work exemptions not requiring a building consent. Doesn't Section 8 apply in this situation? Existing buildings: additions and alterations 8. Windows and exterior doorways in existing dwellings and outbuildings This exemption allows you to carry out any building work in connection with a window (including a roof window, whether it is fixed or opening) or an exterior doorway without needing a building consent where it is an existing dwelling or outbuilding. That is as long as the original doorway or window has not failed prematurely and replacing it will not modify or affect any specified system (eg sprinklers or fire alarms). Examples given are: Removing a dwelling’s lounge window and covering the opening with external cladding and internal linings to form a wall with no opening. Note that minimum Building Code requirements will still need to be met for ventilation, natural light and visual awareness of the outside environment. Following earthquake damage, a builder decides to install a bi-fold door to replace a pair of French doors leading from the ground floor dining room of a 2 storey dwelling. As the wall opening for the new joinery is wider than the existing opening, he needs to install a new lintel to span the opening.

@andrewferris8552 5 лет назад

Thanks for the videos Scott. Always helpful and entertaining!

@MrMMANSONN 5 лет назад

Everything allright Scott? It's been 8 days since your last video.

@alluringdestiny 4 года назад

He mentioned in another video. Editing is the time consuming issue plus he wants to be social with his lady. All the business side of things could also be something to do with it :)

@raylawson72 5 лет назад

Big plaster boards !!! never seen them that big

@rcr76 5 лет назад

ray lawson my arsehole is twitching at the thought of picking them up .2.4 all the way 😂

@iTzNitrOxZ 5 лет назад

im a beginner carpenter and your videos are really helpful!

@covcarpenter9158 5 лет назад

We sure do scot just like we need one in the bathroom 🙄 whats the weirdest request a customer has asked for 😂😂😂😂😂

@derrenwebb5962 4 года назад

yorkshire Daz ere scott... you an ya cool m8 with the back to front hat.... top lads..

@Frieslick 2 года назад

Weird way of plasterboarding in NZ. We have to catch the dwangs with the sheets here.

@bonezbonez992 4 года назад

Hard case, Recognize this guy from school.. good to see ya doing well ,keep up the good work fellas,

@samturner3730 Год назад

remember the days when 91 was $2.17/L? what a time to be alive.

@fthorup 4 года назад

Not much insulation... Even for sound proofing

@DiscoFang 5 лет назад

If this is being done without building permit (you mentioned this regarding the window & door in closet) how are you insulating the outside walls? That specifically requires a permit.

@livingimprovements4382 5 лет назад

Cassette Walkman yeah I am not allowed to insulate the external walls without consent which I discovered on this project. Maybe you can confirm if I’m right, a non qualified builder can replace a window in their own house without consent but not insulate external walls?

@DiscoFang 5 лет назад

Living Improvements Yes that's correct. But to be specific, a non-builder can replace anyone's window. The only restricted building work (RBW) is work that requires a permit and that kind of replacement comes under Schedule 1 Exemptions in the Building Act. Anyone can do (almost) any work that is not RBW. I say "almost" because most electrical, sanitary (waste water) or Specified System work still requires "authorised persons". It's confusing because generally only those who are in the game know the rules. Even then it's tricky! The "does it require a permit" is the general guideline for when you need an LBP to do the work. The other proviso is that any work still has to satisfy the Building Code.

@DiscoFang 5 лет назад

Living Improvements The "Homeowner" thing is when you want to do work on your own house that requires a permit. The "Homeowner declaration" means you (and only you, not a paid labourer) can do Permitted work normally requiring an LBP. Including the design and plan work. But the plan & submission part the trickiest part to get right with a build!

@livingimprovements4382 5 лет назад

Cassette Walkman do you agree it is crazy that a window can be replaced by a non qualified builder without consent (adhering to building code) which has various implications with the water tightness of the building envelope but insulation requires consent? We are trying to increase the health of NZ homes but if joe blogs home owner wants to remodel a room then there is a massive price and time implication inhibiting insulation.

@DiscoFang 5 лет назад

Living Improvements Well actually it's tricky. The problem is that people don't understand moisture and how it gets in and out. Insulation done incorrectly in different constructions can have just as bad long term effects as a window. In fact a single window badly installed can lead to fewer problems than a a whole wall or roof insulated incorrectly. For example, insulation installed without regard to how moisture is travelling, condensating or evaporating from the cavity can result in both zero performance of the insul and mould then rot. Outside walls are a many varied thibg in NZ. There are so many types of construction. Installing a window is easy to assume you might have it wrong as so to seek assistance, guidance or knowledge; insulation of a wall is easy to assume you've got it right... when you haven't.

@JesusMartinez-bx8dh 3 года назад

I like to see the life style of other countries!! cheers mate

@scotttaurean4032 5 лет назад

jez you can take a crap and wash your feet at the same time

@TheBigLeeg 4 года назад

What is “Smoko”? Is that another way of a Smoke Break or coffee break? In the U.S.A. When working as wage slave carpenters , we earn a decent living. However we are expected to work a total of 8.5 hours. With 2 paid 15 minute breaks 9:30am and 2:30pm and a 30 minute lunch break 12pm. We call the 1st a “coffee” break and the 3rd a “Smoke” break.

@godstage 4 года назад

Hey scott ! im from canada i was wondering why you guys always put glue before installing drywall sheets.. i mean.. we have glue here but its not something i often do ! .. is it because of the Construction Code in New Zeland ? :P thanks.. ! by the way love what u do man, you're an inspiration...i think i have the same tool addiction as you do ! :P

@Randy_Gustafson 4 года назад

Hey mate, just a couple of tips. 1) Place a few boards on the floor next to a long walk for stacking the gyp board along. Standing the gyp board vertically will make marking and cutting easier. 2) Start with the first sheet along the ceiling. Butting the lower sheet to this one will allow you to place any cut sheets with the cut along the floor.

@johnferguson6209 5 лет назад

As a sparky, I appreciate the effort on cutting the outlets.

@lewiswallace3319 5 лет назад

John Ferguson makes more sense for chippy to do it. You guys charge more by the hour 😉.

@johnferguson6209 5 лет назад

Worth every cent 😛

@lewiswallace3319 5 лет назад

Haha touché

@skx52 3 года назад

Just seen this. Interesting how over there you start at the bottom with your dry wall here we start at the top of the wall

@joshlester4563 3 года назад

Ahaha why

@HarryLovesRuth 5 лет назад

Our contractor added a window in our closet. It's great. Would recommend.

@DiscoFang 5 лет назад

HarryLovesRuth The problem is UV fading the shoulders & edges of all the clothes. UV window tint film will help but not eliminate it.

@antonhood3083 4 года назад

Reason for putting the gib sheets on the bottom first? Was always taught to get the sheets hard up as bottom hidden by skirtings as top sheets could be square stopped to ceiling. Love the videos bro!

@virtualsnipe9191 5 лет назад

Hi man I was thinking to build my first home so was wondering if you could recommend me top 3 company that are affordable and best in Christchurch thanks

@sarah-janegalipo3995 Год назад

Worlds smallest shower

@npastran90 5 лет назад

Yo come to Maryland

@jessewood3999 3 года назад

No insulation :'(

@petereyre5188 5 лет назад

Loving the inset mirror cupboard 😎🏴󠁧󠁢󠁥󠁮󠁧󠁿

@garrybear6555 5 лет назад

Second

@MrZimmaframe 5 лет назад

In between the plasterboard do you add any sound proofing or use thicker stuff in between the bedrooms?

@zrxnuts 4 года назад

Do you ever use insulation between apartments for sound deadening?

@cliftonobrien588 5 лет назад

Was just about to comment that you guys need a drywall screwgun and then I saw it. And a nice one to bat haha

@solid_jr 5 лет назад

I just found your channel. Love this project. It's strange seeing the difference between how things are done and requirments in NZ vs Canada. Glad to see a fellow makita guy : )

@ivanbagual 3 года назад

Sick vídeo

@cb2000a 5 лет назад

They make electric shears to cut Hardy backer board which work amazingly well.

@EasyClocked 5 лет назад

Far out you are gonna be at 100k subs in no time! Keep up the hard work Scott!!

@TheBailey2000 5 лет назад

“Bit of lime” 😂 was a lemon lol

@dressjess 5 лет назад

It's a sweet lime. Different to key lime or Tahitian lime..... Gosh! Don't you know your citrus fruits!? 😂

@Monsieur405 5 лет назад

The limes on my tree have all turned yellow when they're a bit over ripe. They look like lemons....

@joeberry411 5 лет назад

why do you cut the plasterboard on the back rather than the front?

@scottd4563 4 года назад

Scott, do you always glue and screw drywall?

@georgemartin6389 5 лет назад

How do you find time to film and set up the camera during work, it's ok on your own jobs obviously its just you losing money but it looks like you're subbing in this vid surley the guy gets pisses off when it takes you 20 mins to put up one sheet of plaster board?

@livingimprovements4382 5 лет назад

Doesnt take that long to set up a camera. Also it would be a bit strange if i hired a youtube builder to work on my place and then got pissed off at him for doing filming.

@wheres_bears1378 4 года назад

What brand mask are you using ?

@mintaboi5651 5 лет назад

We all need scott brown carpentry tshirts

@Bossie- 5 лет назад

2:47 My girlfriend thought she had a text message 😂

@ScottBrownCarpentry 5 лет назад

Lol!

@adrianedhouse5175 5 лет назад

It's probably already been asked in the comments below somewhere, but where did you get that GIB lifter tool you had there?

@ScottBrownCarpentry 5 лет назад

Richard got it from AliExpress

@garethsnaim8174 5 лет назад

OK calling from sunny UK, why does your videos always have pink framing materials?

@baileydyson2845 5 лет назад

If you look it up he's made a video explaining it all, but in short its just a colour code system to identify different treatments done to the timber.

@livelikekings8968 5 лет назад

Smashing the subs Cuzzy meeeeean.

@Kingsley_Shat 4 года назад

2:40 that was crazy.. very impressive

@BlokeMcBlokerson 5 лет назад

$2.17 a litre for petrol. Wow mate.

@wilsonbensley4030 5 лет назад

There are exchange rates

@BlokeMcBlokerson 5 лет назад

Yeah but that’s still over $2AUD. Sounds like the government is taking plenty in tax

@gs5480 5 лет назад

That's low for Auckland

@QALibrary 5 лет назад

wow you closing in fast on the 100k subs

@graeme19ooful 5 лет назад

Hey Scott, I'm getting a new finishing gun always used paslode but have got a lot of makita cordless now. Have you heard much about the makita finishing gun??? Keep up the good work, all the best from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿, hope the weather doesn't decide our world cup. 🤞🤞🤞🤞

@ScottBrownCarpentry 5 лет назад

I e heard mixed reviews about the Makita guns, mostly negative reviews. I got the 18g Hikoki and it's really good

@graeme19ooful 5 лет назад

Cheers mate, I've heard the same think I'll stick with the paslode never let me down yet. Enjoying your vids as always 😁 😁

@raymihurtadostuart7052 5 лет назад

Is it just me or did you all stand all over the face of the gib sheet? I learnt to never to do that or the painter will curse ya the whole time he’s there. “You should say something nice too Raymi” ... good job fellas. 😂😂😂 Jokes aside, love your work team, always enjoy the vids.

@livingimprovements4382 5 лет назад

Yeah definitely not best practice but there was no where else to stand so...

@DiscoFang 5 лет назад

Yep. If there was nowhere else to stand they should have dropped them all (except the base) face down.

@fruitbooter79 5 лет назад

Im a union drywaller in the states, its very interesting to see how things are done on the other side of the globe

@nbco55 5 лет назад

What differences are you seeing?

@jamiefoote9940 5 лет назад

👍🏻👍🏻👍🏻👍🏻

@johnneytilley4165 5 лет назад

I have to get there someday

@darylcollins2727 5 лет назад

Can you give us tips on using a caulking gun please. I’m renovating and my caulking gun skills are the opposite of next level. Love your work 🤙

@robertcort8665 5 лет назад

Daryl Collins watch the new episode of finish carpentry. Great tips.

@darylcollins2727 5 лет назад

Robert Cort Thanks bro. Will check it out

@kazukarukelley 5 лет назад

Paerau, The Ninja Chef. Also hangs plaster board. Second only to Ninja Scott Brown. Both have mastered the art of particulate filtering.

@justgregnow 5 лет назад

A level to cut that rock boys? Snapping a line? Come up brah's use your tape with a knife and scribe it lol JK you do you! Awesome work as always 👍

@locominyana8916 5 лет назад

Ruler, index finger & knife cuzy. It's the maddest technique.

@justgregnow 5 лет назад

@@locominyana8916 never heard of it? Show me!

@seendizle 5 лет назад

Was most likely out of parallel

@katrinabell7684 5 лет назад

Interesting watching it come together.

@Matze221100 5 лет назад

Love this project, love to see more of it

@mateusmadeira 5 лет назад

Also first

@MrZimmaframe 5 лет назад

8:06 eating a salad, what are you on Scott a diet or something lol, you’d probably feel better to bulk up a bit on your food intake 😂. Add some mayo or something to that salad to bulk it up 😄.

@truebklue843 5 лет назад

What kind of work boots do your wear?

@ScottBrownCarpentry 5 лет назад

John Bull

@sparx2391 5 лет назад

How long are those pladterboards? Ours in the uk are 8 ft br 4 ft or 1.2 x 2. 4

@livingimprovements4382 5 лет назад

Those were 4.8m but had the 6m ones ordered which they didnt order.

@livingimprovements4382 5 лет назад

Those were 4.8m but had the 6m ones ordered which they didnt order.

@sparx2391 5 лет назад

@@livingimprovements4382 I had no idea you could get plasterboard that long. How many people does it take to carry the 6 mtr ones?

@JRomanosky21 5 лет назад

Why do you it adhesive on the wall. Isn’t that a little overkill?

@drmkiwi 5 лет назад

I think it is so the gib/plasterboard wont vibrate against the studs. Hopefully somebody that knows wil comment! Cheers, David.

@livingimprovements4382 5 лет назад

@@drmkiwi Yeah, helps to hold but also to stop vibration and therefore less sound transfer.

@allanpennington 4 года назад

Standard best practice. Less screws and only around perimeter of board so less stopping. Just don't screw through where there is glue to avoid popping.

@TheI2JM 5 лет назад

Just wondering, why are you putting little blobs of silicon on the stud before putting up the plasterboard? To stop movement or something?

@thaner77 5 лет назад

I thought that was odd also , I've hung lots of drywall and never used silicone. I also live in canada and code changes depending on the country/ region.

@thaner77 5 лет назад

Also I assume it some sort of pl glue not silicone

@seendizle 5 лет назад

It's glue not silicone. The sheets get glued through the middle and screwed only around the perimeter

@TheI2JM 5 лет назад

Ahh I see, cheers guys!

@danielkortleven5804 5 лет назад

On the east coast of the us the screws tend to pop and the sheetrock cracks/breaks so the glue/silicon helps it to stick to the stud. Also code says that you need 3 to 4 screws down each stud.

@AkAsCoTTii3 5 лет назад

‘Little bit of lime’ proceeds to squeeze Lemon

@fredylemmens 5 лет назад

Hi scott, I'm new to drywalling in general so that why i ask you this. Why do you use that silicone of cocking on the frame? is it for sticking the gib to the frame of so you can let go after placing to take your machine?

@BroJared151 5 лет назад

Gib glue. Use less screws so less plastering required

@robinvanbellinghen7069 5 лет назад

If you put insulation fome underneath the shower then the floor of the shower will warmup faster

@alexrains1893 5 лет назад

I see you've upgraded to those toughbuilt saw horses. They are good, I like how well they fold down, you'll find a good spot in your van. If you haven't already done, some 20mm pine screwed on to the top through the frame makes them a lot better to use.

@livingimprovements4382 5 лет назад

They are mine, not Scott's and yeah i have been meaning to do that. Probably have some scrap ply at the end of this job to do that.