Тёмный

We install Ridetech BOLT-ON Coil-Over / Air Suspension for 1965 - 1979 Classic Ford Truck 

ridetechtv
Подписаться 35 тыс.
Просмотров 158 тыс.
50% 1

The classic Ford F-100 and F-150 platform presents some unique challenges when setting out to build an air suspension system that delivers the ride and handling people have come to expect from Ridetech.
The old Ford was designed and built for a different era-back when the speed limit was 55 and trucks were meant to work hard. While the original twin I-beam front suspension was certainly built “Ford tough” but it wasn’t exactly built to carve corners.
Our complete bolt-in suspension system for the classic Ford trucks removes the entire factory front crossmember in favor of our bolt-on front crossmember, and replaces the old leaf spring rear with a four-link. This package can be ordered with either Shockwaves or coil-overs, both of which will help get your truck sitting-and performing-better than ever.
Click here to find out more: www.ridetech.c...
ford f100 f150 truck hot rod custom on air slammed lowrider car

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 76   
@chefdan87
@chefdan87 Год назад
I like the split grill so much better than the 78-79 grill.
@Jon-Bar
@Jon-Bar 2 года назад
BOLT-ON! [remove engine and cut frame step one]
@franciscochavez8424
@franciscochavez8424 2 года назад
Honestly🤣 just a Lil elbow Greece
@msz6829
@msz6829 Год назад
Lmao don’t u known a guy can bolt he can cut
@MCFABRICATION
@MCFABRICATION Год назад
That’s the elbow grease! Hahaha… WTF I just wanted to see if it felt good ride wise…
@sfsaudi2069
@sfsaudi2069 2 года назад
Finally a kit I can buy and install and go
@brianclayton3898
@brianclayton3898 Год назад
I own a 78 F-100 short bed. I only wish that I could find a bed for it so I won't have to cut and weld in New metal over and around the wheel wells. Nice kit, but seems a bit harder than the description.
@texman8742
@texman8742 2 года назад
beautiful truck and impressive
@TheThirdWheel618
@TheThirdWheel618 11 месяцев назад
And it can be done in a weekend 😳 nice set up the nicest part was seeing the big ugly crossmember being cut and the twin I-beam set up being dragged across the floor .
@SuperDcopeland
@SuperDcopeland 2 года назад
My first truck was same year but a long bed. Kinda miss that ole truck sometimes
@davidcatlette9697
@davidcatlette9697 2 года назад
Had one just like this ! Mine was short bed , black w/ red interior f 100 ranger XLT package ! 390 fe built C6 with shift kit ! Nine inch rear w/373 gear mini spool !
@d.collier_8280
@d.collier_8280 Год назад
Ridetech, please please please! Make this kit available for the 80’s model F series truck. I have a 85 that I’m working on and would love to have this installed on it!
@craigkeefer5765
@craigkeefer5765 2 года назад
Cool! See-ya I-beams.
@jerrymartin3457
@jerrymartin3457 Год назад
I need one of these for my bullnose
@JamesJones-tx4wy
@JamesJones-tx4wy 2 года назад
The truck in this video reminds me of my 77 f 100 I bought new wish I could post a picture of it lost it to a engine compartment fire , 302 , c 6 transmission
@Mauiwowie05
@Mauiwowie05 Год назад
I have a 1971 F 100 I wish looked like this lol
@daudfw8440
@daudfw8440 2 года назад
I'm riding high....76 high boy shorty...maybe in my sixties I can get a low go...78-79 best ford's. 👌
@taylor-dn3yq
@taylor-dn3yq 10 месяцев назад
Do they make a suspension for a 1981 f150 ranger
@JBforTrump
@JBforTrump 2 года назад
Nice
@yxng_.cris44
@yxng_.cris44 2 месяца назад
is there a way to add bluetooth 🙏
@CodyB-R1
@CodyB-R1 11 месяцев назад
Is this a long bed or short bed
@ismaelcardenas5507
@ismaelcardenas5507 Год назад
Would u happen to know spring rate for a coilover set up for this truck
@aw9680
@aw9680 10 месяцев назад
Is stock ride height possible with this suspension?
@michaelmathes57
@michaelmathes57 Год назад
Will this kit work on a 75 f250 truck 2 wheel drive ?
@erichoover7364
@erichoover7364 2 года назад
Any plans in doing a watts link set up with this or is it not necessary, also would welding the brackets to the frame add any benefits, also 1 last question, the front crossmember engine mount bars, is that a 1 size fits all or will there be different types like if we canted to coyote swap or godzilla swap the truck?
@Dan-dj3cx
@Dan-dj3cx 2 года назад
I'm wondering about the Coyote swap too? Heard the mustang 2 cross-member doesn't work out well.
@JuanMunoz-oj3xn
@JuanMunoz-oj3xn 5 месяцев назад
Need to make a kit affordable for a ford maverick 77 something decent for reasonable price,
@jkgkjgkijk
@jkgkjgkijk Год назад
This is a Frankenstein project.
@tonyfoxxbuilds1920
@tonyfoxxbuilds1920 Год назад
I recognize that voice!
@AP-xq3jm
@AP-xq3jm Год назад
I sold a 75 short bed like this for junk once after I removed the front disc brake suspension for my 69 longbed. Never really cared for short beds. Maybe I should have kept a few of them.
@eliochoa5834
@eliochoa5834 Год назад
What is the price of that kit
@phillipgargus7813
@phillipgargus7813 2 года назад
I know it's not likely as it isn't a very desired truck, but any chance on a similar setup for a 10th gen f150
@ศรีทนคําของ-น6ล
สวยน่าใช้แต่เสียดายไม่ใช่ไฟฟ้านะ
@sirreus3003
@sirreus3003 2 года назад
Why?
@no1but24
@no1but24 4 месяца назад
Nice kit, needs a Coyote, and I would’ve put an electric rack in it.
@piousminion7822
@piousminion7822 Год назад
"we like our trucks low" Why get a truck only to cripple it?
@taco472
@taco472 Год назад
Really? A set of drop-beam axles would be a whole hell of a lot easier and I’ll bet a fraction of the cost. May not have the performance quality but really….? After all that and they didn’t even put in a 550hp. Coyote or a Shiverlay LS.
@cecilandrews7479
@cecilandrews7479 Год назад
Not really impressed, still just a lot of body roll. For me the expense and the amount of work not working not worth it
@davidrose2382
@davidrose2382 4 месяца назад
Crown vic easier cheaper
@hadtocheathimtobeathim6549
@hadtocheathimtobeathim6549 2 года назад
How is camber adjusted on the front? Obviously caster is done by sliding the upper arm back and forth.
@TheThirdWheel618
@TheThirdWheel618 2 года назад
Thanks for considering our old classic trucks in your suspension lineup ......
@joeschlotthauer840
@joeschlotthauer840 2 года назад
At $8,225.00 for the kits, why not just go for a custom chassis...
@deanrickvalsky7586
@deanrickvalsky7586 2 года назад
Because a custom chassis is twice that and a lot more work.
@joeschlotthauer840
@joeschlotthauer840 2 года назад
@@deanrickvalsky7586 12K gets you a Spec chassis from Roadster shop...
@deanrickvalsky7586
@deanrickvalsky7586 2 года назад
@@joeschlotthauer840 that’s a basic price you still have to make some selections that will add to that cost. Plus the labor is more. So the savings is why people go with a suspension system. Like I was saying.
@nicholasbrown6481
@nicholasbrown6481 2 года назад
​@@deanrickvalsky7586 twice the cost. same amount work
@TheThirdWheel618
@TheThirdWheel618 2 года назад
they made it about as simple as you can get versus adding a crown Vic suspension in the front although that's a hell of a lot of work if you were just doing it by yourself and your backyard I would consider a kit like this if I was newly retired and I didn't have nothing to do and I didn't want to be bored to death. although that's a pretty hefty price tag and then you have to take your engine out you see that was the killer for me that was the deal breaker for me with the crown Vic swap as well although there's some people that have a lot of money to deal with and they'll easily buy one of these kits and pay a shop to install it for them it's a pretty trick kit actually the only negative for me with it is I don't have I don't have the money to buy it and I don't want to yank my engine out to cut the crossmember out.
@johnbehneman1546
@johnbehneman1546 2 года назад
I AM SO IMPRESSED!!!! TOTALLY AWESOME ENGINEERING!!!!! I LOVE THE DENT SIDE FORD TRUCK!!!! SO BADASS AND THANKS FOR SHARING!!!!! TOTALLY AWESOME UPGRADE!!!!
@thomasmoore2695
@thomasmoore2695 2 года назад
I'ma go ahead and talk about how clean that truck is...me thinks that's never been a northern work truck know what I'm sayin...
@ko4otv43
@ko4otv43 2 года назад
Beautiful 76
@joepilbeam4722
@joepilbeam4722 2 года назад
You basically dropped it and put fugly wheels and tires on it. May God have mercy on your soul.
@cjdonaldson153
@cjdonaldson153 2 года назад
Yes, was way cooler original
@davidcatlette9697
@davidcatlette9697 2 года назад
Right I don’t like those wheels some 15/ 10 on back and 15 8 front !
@drdt4
@drdt4 7 месяцев назад
What does a system like this cost with labor. And what kind of time frame are we looking at. This is a cool project. Thanks.
@natebarrios3275
@natebarrios3275 День назад
Can this kit be welded on instead of bolt on?
@OpieDaRed
@OpieDaRed 2 месяца назад
wonder if works for f150 frames
@talesofanasphaltjockey
@talesofanasphaltjockey 2 года назад
Awesome set up
@rileyvetter9653
@rileyvetter9653 2 года назад
Super clean
@kj-cf2tx
@kj-cf2tx Год назад
thank you for painting the frame rails before putting new stuff on. i die a little inside when car shows bolt new stuff on to dirty rusty areas.
@jkgkjgkijk
@jkgkjgkijk Год назад
Word salad: "uncompromised suspension geometry" that tubular steel is a deal breaker. Made in China quality. No thanks!
@timken88
@timken88 Год назад
I had a 1974F 100 XLT just like this one never knew they had something like that but then
@chaloherrera9739
@chaloherrera9739 Год назад
Wow amazing, not bolt on lol but amazing can I take you guys my bullnose! I have similar wheels on mine
@johngreene6783
@johngreene6783 9 месяцев назад
I must be really old school. Love my trucks to be trucks, not lowered street stuff
@JeffWatson-cc6uw
@JeffWatson-cc6uw 10 месяцев назад
Dudes driving me crazy with how he’s spray painting. GD
@cekezcekezinc5590
@cekezcekezinc5590 Год назад
What size of wheel you put it on ?
@benitocarlos1927
@benitocarlos1927 Год назад
What's your location guys? How can I get that kit?
@magnus9165
@magnus9165 Год назад
That all looks tough. Crossmember esp.
@sethook-ro4xh
@sethook-ro4xh Год назад
I need this for my brown beast
@bobhilly546312156332
@bobhilly546312156332 Год назад
Is the break kit 5x5.5 or 5x4.5
@flipflopsgarage
@flipflopsgarage 2 года назад
You guys should invest in a torque wrench.
@bigboski503
@bigboski503 2 года назад
A couple ugga duggas usually gets it done
@constantinople777christens5
@constantinople777christens5 2 года назад
I like it.
Далее
The Perfect Coyote Swapped Ford Truck
18:25
Просмотров 90 тыс.
Inside Out 2: BABY JOY VS SHIN SONIC 4
00:16
Просмотров 3 млн
F WORD: a coyote-powered, protouring patina '69 F100
17:20
Did I Over Build My F100? Complete 500HP Breakdown!
23:25
Unboxing The Cheapest Air Bag Suspension I Could Find
12:54
1971 Ford F100 V8 Coyote 5.0 Swapped!!
8:39
Просмотров 40 тыс.
Inside Out 2: BABY JOY VS SHIN SONIC 4
00:16
Просмотров 3 млн