We Test Wish.com Electric Turbo ON THE DYNO! 

I believe this product is not intended to boost performance cars such as the Nissan skyline in this video but cars with smaller engine displacement ranging from 0.8L to 1.5L. Looking forward to another test of this product on a K-car.

I love it. Sam said "were obviously running this with no filter" and the first thing that popped in my head was "that weird, he never has a filter."

This series is cool and you can do so much with it. You should always have a few of these backlogged so you can have vlogs ready in case you need it. Daiki seems to be fitting in well. Keep up the awesome work !!

I love this series gives me nostalgia having my rb25de with a electric blower while me and dah boys were thinking we picked up 20hp while we really jus where getting high off exhaust fumes

Diaki is such a great addition to this channel and what your doing is amazing

Lab coats 👊 What a great collaboration with GCG to utilise a decent dyno. It could not handle the juice and was more of a restrictor. Sugoi to reality. In the bin .. Arigato. Peace & best wishes 🤘✌️🇯🇵🇦🇺

I love Daiki! You have to do a track day with him eventually!

Its a 3 phase brushless motor and you just don’t get any more power out of it by over voltage on the controller. Needs more frequency out of the controller and you might get more out of it before the winding blows.

There are multiple issues with electric turbo's that can be overcome. 1. They are intially a restriction, which can be fixed by a by-pass valve. 2. They don't spin at very high RPM 3. 12VDC can never produce the power required to provide meaninful boost 4. You need at least a 48VDC system 5. including a large bank of Super Capcitors will significantly add instant power for the motor to draw upon. 6. The good ones are very expensive. 7. Best available on the market is The Torqamp made in Holland.

I'm thinking of letting your shy electrician friend swap the electric motor to something that's better quality that spins faster to see if it actually would make boost

Dyno procedure for automatic transmission. Shift to 1st or low. Upshift to second. Shift to D to get into 3rd, then shift back to 2nd to lock trans in 3rd. Do your dyno pulls in 3rd because it's usually the direct drive gear.

I think it might work if you moved the motor away from the turbine wheel and but it on a bigger gear, with a belt to the small turbine wheel....so when the motor spins the big wheel around once(360) the turbine housing spins 360 10 or so times. Whatever it takes to get the turbine wheel to 120,000rpms.

I LOVE YOU SAM..I hope everything’s well with mae and the baby you inspire me to make content keep makin these bangers and I’ll always keep supporting since day 1…LOVE YOUUU !! ❤️💯

You should revisit this and use it for a supplementary support by adding a Y joint one to stock intake and the other to the turbo and in theory it can only add extra flow you could even double up the turbos making it twin with 2 Y joins

Brah I'm not gay but Daiki's smile cures depression lol, protect him at all costs 😂

I already suggested to put it on the little two stoke scooter you got.. it will definitely boost it .

Yo! Try putting 2 of those throw a small intercooler system than do tests with that orange fan you have to simulate air coming into the intercooler. That plus the 2 electric turbos hopefully show results 💪🏼

Awesome video as always Sammit. Instead of throwing it away fix to use as a hair dryer for you a May at home.

Dude I was just getting ready to comment, give the turbo more voltage then he did it. I love this guy!

It's funny when sam ask the guy to rebuild his electric turbo and the guy laugh then suddenly stop laughing and say nooo

Love the energy!!

Awesome video-I love tearing shit up!!

garage 54 used a starter motor for forced induction and they saw good results so a more powerful version of this should be pretty good

I wonder if it would make power on a smaller engine? turbo looks to be about the same size as the gt1446 that comes on the Fiat 500 abarth

More videos like this please it's very interesting and funny too 😂🔥👍

Lol they really are master tuners More interesting tuning videos from wish please!

Don't trash it install a bigger electric motor to the compressor wheel it let it eat until it really blows that would be sickkkk!

It wont help no matter what you do because the motor cant spinn it fast enough. The eermp or kV is too low. I would like to see if you can put a brushless inrunner rc car motor on it instead. They can provide 5000 -20 000w so this have been proven to work. It would would be fun to see you guys use a cheap but big rc motor with correct kV rating with regards to the 12V to spin it fast enough. I guess the guys at the shop can give you an estimate for when that diameter turbo begins to work.

Ok now do it with 6 electric turbos. One for each cylinder! For science of course

Gotta love the best Dyno being used to test it

I thought it would do something but not alot. Im impressed it hurt more then helped.

I'd love to see more videos where you are just messing around and doing "science" experiments

Lots of work! Entertaining!

Should of used a y pipe before afm it would actually make power because it wouldnt cause a restriction and the eturbs would push positive air in

LOL maybe you can mount this in the back seat of the car and kick it on to clear the smoke out of the inside of the car? How about one of those go-kart racing places you have gone to in the past see if one of those guys will let you hook it up to the kart and take it for a spin. Why not the k-carr I bet you will find something that it works for. Other than that it's pretty much a glorified hair blower!

Love the videos Sam

2 videos out of the $80 wish turbo . Solid effort

I feel like the electric turbo could have allot of potential maybe if you got a more powerful electric turbo and get a device that changes the rpm of the electric turbo as you go up in rpm with the engine so it doesn’t just ho full power as soon as it’s turned on

My Mrs and I cannot agree about dinner, but we can agree a SAMMIT video is always good!!

love the experiment lol completely expected it to fail but hopeful it succeeded 😂

Loving the retro music in recent videos!

Dude this guy living my dream after my car accident it knock me off my tracks 😞ill be back doe keep it up

You could try putting the compressor on a belt (like a weird turbo/supercharger mix)

Happy to hear your tooth is getting better.

Maybe try retrofitting your own electric motor to it 👍

Nice one bro i have eg6 turbo swap H2BA7 jdm

I think the turbo blew up because it was running with the throttle valve closed, assuming back pressure the cause, good show

Hahahaha so funny what a cool dude letting u use the dyno for this type of test wonder if u could put a rc brushless motor init

Maybe a bit of an odd question but I didn't see in the video. When you set it up for the 24v did you keep your switch line at 12v? The controller system might be able to handle passing through a higher voltage but if your control switch line was changed to 24v also it may have been overloading the controller leading to it overheating and shutting down. The motor itself can probably take 24v at least for longer than it was running in the video. It looks like a controller problem caused by overload the way it would turn on then turn itself off and eventually not turn on again for a bit while it cooled down and changed back to 12v.

I had hoped it made atleast a tiny bit of power, but nah G, it completely shat itself xD

The new crew is funny 🤣

for cleetus mcfarland doing this 3 years ago, with lab coats and all, you got it right with the air flow meter on the air inlet side lol

MORE OF THESE SAM

Bro thought for .02 seconds and said nooo as politely as possible 😂😭

Into the trash? I would keep it at the shop as a hair dryer or even a hand dryer in the bathroom to use less paper 😜

Funny I'm starting to see the vids As I did something similar with an old ko3 and run it of a belt of bottom pulley 10yrs back not a dc motor

Change the motor in the "turbo" may be use a high power RC motor along with an ESC be interesting to see if a more powerful motor say 60v+ can get it up to the power needed to make a little boost

Dammit Sammit I knew it! You will put the explosion at the end of the outro 😂

Watch Cleetus McFarland much?? Labcoats & Ebay Electric turbos....???

part of me wants to rebuild it with a 48v motor and some 3d printed gears. with a small like lipo bat pack and a 48v controler

I have rb20e also, wonder what would be needed to make it rev higher rpm, as the design seem to be good at it

First thing you want to do before dynoing an auto is to manual swap it.

To anyone watching, please please please don't install super cheap parts on your car that can blow up inside and cause heaps of damage. :)

I think it’s too small and doesn’t spin fast enough. Also you’d probably need a standalone to make the boost curve more linear or to mimic the curve of a real turbo. That way you don’t need a switch and it wouldn’t be 0 or 100

electric turbo could work if the tech used in hybrids were applied like ac volts from an inverter matched with a motor wired for it and use gears pretty possible I think

I have a 16 valve 1.6 carrbed. with a HKS hood was hoping to have a drawthrough setup

I think the ESC inside blew up.. ngl I feel like with a higher volt system , electric turbos could be a thing .

Sammy-san the consumer journalist - who knew :)

the next logical step is 4 electric turbos

My toro battery powered leaf blower a hell of a lot more than that thing. I was putting out around 200 hp all stock on my 02 mustang. We rigged up the leaf blower and hp increased to 246hp no joking. It was bad ass

Love it!!🔥💥💥👍

I want to see how the turbo does on the go-ped haha

Would be interesting What happens if you put a real compressor wheel inside this housing.

I laughed so hard i wheezed when it got 99ps lol

As MCM would say.... "IN THE BIN!!!"

Gods engine paired with gods turbo best combo out😂🤣

We laugh at the wish turbo but I feel soon we’ll be seeing some electric turbos soon especially with emissions getting stricter

why are people so desperate to be the first comment just enjoy the video

That turbo needs a brushless motor

Maybe make a wall or bin of shame. It'll be the first thing there haha!

Thanks Daniel! pretty cool fella!

smaller engine will defenetly be better because the demand of air is much less in a k car it should be 1/3 of air demand then of the skyline. also maybe add another one and make it twin turbo even if it doesnt make much more power its awesome to say to own a twin turbo k car xD. maybe try it on these drifting karts atleast there it should work

as previously stated, in theory it should 'work' - the thing i learned is, engines need a lot of air !!! a lot !!! i was shocked at how little power that car has. i'd still like to see inside the control box. silly/educational content is great fun. well done mate!! :)

Why don't you try with bypass? Extra hose for turbo hooked at the side of main, so you have no restriction in air flow, and get more boost from turbo when you turn it on...

I have a test for the electric turbo, try putting it on your motor scooter. the engine is small enough maybe see a gain that's if it could be rigged up.

Torqamp uses 48v to power their kit. Maybe try hooking this wish unit up to separate batteries?? Nevermind just seen it at 24v lol

It would make a good hand dryer for the shop

It will make no odds to the results,but an automatic gearbox in drive with OD off is closer to 3rd gear in a manual gearbox,OD on locks the torque convertor and gives 1:1 ratio same as 4th in manual gearbox,it would give a higher power number slightly if the auto box is not slipping/working correctly has fresh ATF and filter pick up,I guess the skyline has a well used box so it will read lower due to some slip from well used fluid due a change

Turbo best effects is torque boost in low rpm.

Yes Sam please try on a kei mtr

I wanna see that turbo on a low powered scooter or motorcycle

You should try two of those maybe three on the skyline 😅

They make RC car motors that spin like a 100000 were better so maybe if you rebuilt it with one of those motors you could actually make it make power

What's next sammit?? exhaust turbo whistles

That's to today's science Lesson with professor sam

This is exactly what I thought would happen.

Maybe try 3pcs of that turbo sir if its work?because the electric turbo is verry small and rb8 engine is verry big

I am very interested in knowing about the gadget you hook the tire too I've been trying to turn an old car into a generator and this was the closest I could ever fine of achieving this gold can you tell me is this possible and can that gadget help me with this , can you also tell me about the price or is it any other device similar to it what we are asking about.

Put the turbo on a small engine like a k truck or small 800cc or 900cc car even 1000cc less volume of air needed for boost.

How about trying it on a small engine (1000cc), with 18V, using a makita battery.