Weather Satellite Tracking Software Setup

Подписаться 113 тыс.

Просмотров 35 тыс.

50% 1

** Missing step here**
• GPredict Radio Interfa...
Here we take a look at how to setup the software to track, receive and decode the NOAA weather satellites.
SDRSharp: www.airspy.com
GPredict: www.gpredict.oz9aec.net
Plugin: github.com/alexwahl/SDRSharp.GpredictConnector
WXtoIMG: www.wxtoimgrestored.xyz
VBAudio Cable: www.vb-audio.com/cable
Hardware used in my V-Dipole video:
(UK) NooElec FM Filter: amzn.to/3cmaymh
(UK) NooElec NOAA SawBird: amzn.to/2XSsTCq
(UK) Airspy R2: amzn.to/2McBdHH
(UK) NooElec SMArtee: amzn.to/2BjLtM2
(USA) NooElec FM Filter: amzn.to/2Xih6xQ
(USA) NooElec NOAA SawBird: amzn.to/3ez9dKo
(USA) NooElec SMArtee: amzn.to/3dljTvR
GoFundMe page here: www.gofundme.c...
Products used in my videos can be purchased through my Amazon storefront.
US ► www.amazon.com...
UK ► www.amazon.co....
Support This Channel by becoming a Patreon.
My Patreon ► / techminds
My Twitter ► / techmindsyt
My Amazon ► www.amazon.co....
My PayPal ► www.paypal.me/...
Merch Store ► teespring.com/...
If you enjoyed this video please help me out by subscribing and help me get to my next Milestone of 50,000 Subscribers!
Music: www.bensound.com
#TechMinds #NooElec #NOAA

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@mirskym 4 года назад

My setup was working on my laptop for awhile and then for whatever reason all the pictures I was getting were scrambled. They looked like the picture on an old TV when the horizontal hold was not in tune - the picture was pulled apart into jagged bands. Tried all sorts of things with no luck. Then someone on the Facebook APT Group suggested it looked like an audio distortion and suggested I not use VB Audio but the native soundcard. So I set HDSDR (my receiving software) to output to Windows Soundmapper and WXtoIMG's input to Windows Mixer. IT WORKED! In this setup, you can still hear the satellite on the speakers, and the volume control sets the signal strength input to WXtoIMG. I set it to 28% to get 55% volume on WXtoIMG when recording. So in case someone runs into this problem, worth a try.

@clemensdautermann6880 4 года назад

I once asked you on Twitter to make exactly these two videos and now you actually did. Thank you very much!!

@TechMindsOfficial 4 года назад

You’re welcome 😊

@bigoceansmallboat 4 года назад

Thank you, for this. I can't wait to get back to the boat tomorrow and try this out.

@FredStam 4 года назад

I was struggling for a couple of days with the software and now i can solve this. Thanks. The only problem now is a couple of trees around my house when they are wet Atenuation... the signal isn't coming trough that good. thanks for your video.

@widdy4 4 года назад

Fantastic! I much prefer GPredict, didn’t realise I could use SDR# to track the doppler shift. Many thanks 😊

@johng7rwf419 4 года назад

Spot on, it was the sdr# plugin that stumped me. Thank you...

@acestudioscouk-Ace-G0ACE Год назад

I'm late to the SDR party but now I'm here, I'll be giving it a go with your video's help. Thanks, Mat! 😀👍

@microsurf128 4 года назад

Cheers:-) WXtoimg software install OK, just need to build the antenna now. Many Thanks Gordon

@O.S.R.C. 3 года назад

Very thorough... Easy to follow setting up. When I opened radio control I couldn't select SDR#, but Gpredict was listed. SDR# is updating freq, so it looks like all is good. Now just waiting for a flyover!

@SmeeUncleJoe Год назад

Same problem. Did you resolve yours ?

@alzeNL 4 года назад

really good set of instructions - whilst I a use windows for my main amateur radio and digital modes, i kept this to my mac, which your guidance i was able to use gqrx, gpredict and a decoder called noaa-apt (which whilst isnt currently feature rich as wxtoimg, is still being actively developed and works on 64 bit mode os-x). First attempts of decoding was abysmyl, but the plumbing is all in place to keep trying and get better ! thank you, a very exciting and interesting additon to the hobby.

@alzeNL 4 года назад

alz0r.stoatopic.net/p/cd7f6023-25ef-4d02-9eb3-44a823b34a85 its all progress :) will keep on trying, main thing is it works ! - write up complete :) hamradio.knipmeyer.co.uk/2020/06/14/noaa-antenna-and-osx-decoding/

@baranjen 4 года назад

Truly sublime video. Thank you very much. Need to get the dipole built now to try it.

@emmanuelokpas7807 Год назад

Thanks, a whole lot for your very explicit video. I just constructed a V-dipole antenna and installed some software on my Linux system. My challenge is installing, running SDR-SHARP on Ubuntu 20.04 Linux distribution. I would really appreciate your assistance.

@sewashburn0529 Год назад

This is great! I wish we could have done this with STS Plus back in the day...

@easthulk99 3 года назад

Thank you for this video. the kind of video that i looking for which i did not get from my HAM friends.

@TechMindsOfficial 3 года назад

You are welcome!

@rogerp5816 4 года назад

Thanks for a great video. Your video fills in a lot of gaps everyone else has missed over the years. What are your thoughts on the dipole antenna you built vs. a QFH?

@TechMindsOfficial 4 года назад

Thanks Roger! I havnt tested a QFH as of yet but I do plan to make this and create a video, then I’ll be able to do a comparison. Thanks for watching 🙏

@maufox1 2 года назад

Thank you for the video. Orbitron and sdrsharp plug-in does start sdr# when a satellite is above the horizon. Is it the case for gpredict and gpredict connector plug-in too. It looks to me that sdr# has to be left on. Is it so or I am missing something?

@jamesbrady9105 3 месяца назад

On the new versions of Gpredict, you have to create a folder inside of the plugin folder and name it something; then copy the dll file into that. It wont work, unless a folder is created inside of the plugins folder - very important. Nothing else to edit in notepad. Also wxtoimg can no longer update keplars unless wxtoproxy is installed, that has to be installed and configure it, then it will work. This is a good video, but it needs to be updated.

@DavidsCafe 3 месяца назад

can you please do a video on how to do this on SDR RSPDX ??🙏🙏

@tratzum Год назад

This is an old video so not sure if anyone will see this. I am just getting into SDRs and seen many of your videos. I have been playing with wxtoimg, VB audio cable and SDR console v3. I was hoping you may have a troubshooting tip. If I select vb audio cable and let the program handle tuning for NOAA 15, 18, 19 the decode in wxtoimg is very bad. Tearing and static accross horizontal lines in wxtoimg. If I select my PC speakers and then back to vb audio cable it works. So I know I can get clear images but only if I sit at my PC for every pass. Any tips? KK7JVV

@RadioAdventurer 4 года назад

Thank you very much! Very detailed 👍👍😀

@ericgilman5457 3 года назад

I think you hit every needed detail but one. Audio settings. I either get black screen, or snow screen. Baud rate? Bit rate? Where to make these adjustments? I do not know why your video came up so far down in my search but it should be the first one that pops up!

@crookedtool Год назад

Based on what I saw in the video, there is a baud rate setting in the image decoder. As far as the audio, it can help to turn on the monitor option under recording devices in Windows so you're able to verify that VB Cable sounds like it should with proper volume, clarity, etc.

@caramba10 4 года назад

Thank you for this, has cleared up a few loose ends. If leaving unattended is there any way to tell which image files were from which satellite?

@Monorijder 4 года назад

yes, every image has an satellite name and date/timestamp in the filename.

@Connor78255 Год назад

I can't get the gpredict plugin to show up on sdr sharp, I've followed the install directions to a tee. Anyone else having this issue?

@TheMrR9 4 года назад

Awesome stuff.

@micsherwood4930 3 года назад

I tried to follow this to the letter, but as of 02/10/21 my program and gpredictconnector files don't look like your, and do not see, in sdrsharp where the gpredict selection is.

@crookedtool Год назад

In gpredict, go to preferences, add new, Type SDR sharp for the name, IP 127. 0. 0.1 Port 4533 and RX only then save it. The Channel Op answered someone else about this in the comments section and said he made a video as well.

@KernowMan68 3 года назад

Hi. When I click on Radio control, no devices pop up. Am i doing something wrong?

@williamconnolly4790 4 года назад

Thanks

@darwintea 3 года назад

Excellent video!

@keesvanoosbree5911 4 года назад

HELP HELP HELP HELP!! When I click on the radio control button it says that there is an error. It says I need to configure a radio first. What is going on?

@TechMindsOfficial 4 года назад

Have you installed the GPredcit plugin on SDRSharp and enabled it?

@TechMindsOfficial 4 года назад

Oooops there is a step which I did not include in the video! Sheeeet! In GPredict, goto preferences and then interfaces. Click Add New. Call it SDR Sharp, host is 127.0.0.1 and port is 4533, rig type RX Only. Save it and then you should be able to open the radio panel.

@TechMindsOfficial 4 года назад

See this that I just created: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MSxwuORvZdI.html

@keesvanoosbree5911 4 года назад

@@TechMindsOfficial Thanks so much! Working now. Love your videos. You are the only person that made a video on how to connect SDR Sharp to this software. Thanks. 73 de W0AAE

@crookedtool Год назад

@@TechMindsOfficial Please pin this comment.

@jimawhitaker 3 года назад

how do you set proper audio level?

@opensource_fan685 3 года назад

Great video. I saw another one of your videos tracking the weather balloon. I was wondering could any of these apps make the file to upload into google earth to see where the satellites are in 3-D?

@bad2thebone244 Год назад

hi i keep getting error you have no radio config plz config a radio 1st. when i try and conect gpredict to sdr i must have tried it 20 times

@crookedtool Год назад

@SmeeUncleJoe Год назад

When I went to set up radio control, it said i had no radio configured. How do I do that ? Thanks.

@crookedtool Год назад

@lamaramuhammed8785 Год назад

Can use it to predict my current location

@crookedtool Год назад

Unlikely since gpredict requires your current coordinates and altitude to function. You could use an L-band antenna with GPS software. I think there is a video about it on this channel.

@vu3sxe 2 года назад

Wonderful 👍

@stefi300972 3 года назад

did all this but when i clicked sdrsharp exe nothing happens, ok, the newer 5 versions dont work but v1.0.0.1732 does work

@Anjum9694 4 года назад

Is there any difference compared to Orbitron and gpredict you noticed

@Darek80 4 года назад

I still use orbitron. In fact it is dos software but works very well on Old computers.

@TechMindsOfficial 4 года назад

Orbitron works just as well as GPredict

@Monorijder 4 года назад

you can also try SDRConsole V3, it's SDR and satellite tracking in one application.

@Ray_M0MXN 4 года назад

👍

@microsurf128 4 года назад

WXtoimg software seem to missing the program software. All I get is a text file. Any help appreciated.

@TechMindsOfficial 4 года назад

I had the same issue this evening while installing on a friends windows 10 machine. If you look on the website for the BETA version that worked for me and installed correctly. I think the original installer is crashing so try the beta version.

@allelboulefa911 3 года назад

I have a problem when a click play in the air spy sdr there is a message that say there is no connection your pc refuse the address 127.0.0.1 4533

@crookedtool Год назад

Did you ever solve this? Maybe try double-checking that the preferences in gpredict are entered correctly with that IP and port. Sorry, that's all I have without more info.

@nathan-ql5vh 4 года назад

it says i have no radio configuration when i click radio control. what is the solution

@TechMindsOfficial 4 года назад

Look at the link in the description, I created another small video to address that issue :)

@nathan-ql5vh 4 года назад

@@TechMindsOfficial i gave up and got into bed.. looks like im getting up again lol

@TechMindsOfficial 4 года назад

Did it work?

@nathan-ql5vh 4 года назад

@@TechMindsOfficial it did indeed. Thanks for the help. I like your videos.

@mikeshane2048 3 года назад

@@nathan-ql5vh I was about to do the same, but managed to get it up and running. Plus your comment got a laugh out of me. Did you able to decode any weather satellite images?