Тёмный

Week 20: Get Clean, Sharp, Embroidery Results 

Romero Threads
Подписаться 26 тыс.
Просмотров 26 тыс.
50% 1

Today's downloadable training file:
drive.google.com/drive/folder...
Support the embroidery class:
Paypal email: 4everromero@gmail.com
cash.app/$RomeroThreads
Free Mighty Hoops Shipping:
Use promo code: romero
hoopmaster.com/ref/Romero/
Or
Place orders via telephone and mention “Romero Threads”
Call Hoopmasters at: 262-257-0930 (within the contiguous US).
Embroidery items we use everyday.
---------------------------------
Embroidery Sharp Needle: amzn.to/3ldQnku
Ball Point Needles: amzn.to/3Yg3y3h
Graphic Alignment Ruler: amzn.to/3JUQ60f
Embroiderer's Helper Placement Tool: amzn.to/3YEIRgS
Fiskars Rotary Cutter, Titanium: amzn.to/3I8aFFd
Tide Pen: amzn.to/3Ialpmj
FlexFit Hat: amzn.to/3YDkqk5
Puffy Foam 3mm: amzn.to/3RNzd9u
L-Style Towa Bobbin Tension Gauge: amzn.to/3YjUDO5
Amazon Essentials: Items we use everyday
Must have embroidery items: amzn.to/3DStHwK
Books I read: amzn.to/3YFpsN7
Photography & RU-vid Equipment: amzn.to/40KI5AT
Shipping supplies: amzn.to/3RLwtJN
Yupoong 1501 Heavy Weight Cuffed Knit Cap
amzn.to/3e5ssNt
Visit our Embroidery Amazon Page to view what products we use for everyday use:
www.amazon.com/shop/romerothr...
AllStitch (everything you need for embroidery)
allstitch.com/?ref=RomeroThreads
Groz Beckert Titanium Coated Embroidery Machine Needles (size 80 / 12)
amzn.to/3aGyaCD
Sulky Of America 12 Color 3mm Puffy Foam Assortment, 6" by 9"
amzn.to/3m1tq1s
Gingher 4'' Curved Embroidery Scissors (best of the best)
amzn.to/3ekzOO7
Fiskars Curved Craft Scissors, 4 Inch
amzn.to/3p5Dbue
Embroiderer's Helper - Template Aid - Placement Tool
amzn.to/36FJ2jO
Towa Sewing L-Style Thread Bobbin Case Tension Gauge TM-1
amzn.to/3xxjPmr
Mini screw driver case:
amzn.to/3q8gI1K
Dritz 710 Mark-B-Gone Marking Pen Combo Pack, Blue & White
amzn.to/3oKJnYF
Duckbill Scissor
amzn.to/3qSKwP2
Odif USA 505 Spray and Fix Temporary Fabric Adhesive 12.4oz
amzn.to/3q2XZDT
Shipping Department:
Amazon Boxes: Aviditi 886 Corrugated Box, 8" Length x 8" Width x 6" Height, Kraft (Bundle of 25)
amzn.to/2Lqbvmg
ULINE 25 Clear 18 x 24 Poly Bags Plastic
amzn.to/3pU6Sje
Avery Shipping Address Labels, Inkjet Printers, 50 Labels, Half Sheet Labels, Permanent Adhesive, TrueBlock (8126)
amzn.to/2P4FAGj
DYMO Digital Postal Scale/Shipping Scale, 10-Pound
amzn.to/3pPaT8D
Photography Department:
-Hat Holder:
amzn.to/2We67rf
-Hat Helmet:
amzn.to/3rwq3kS
-Back Drop:
amzn.to/3BOHMsy
-Reflector:
amzn.to/3kQZyoL
With Amazon affiliate links, I earn a small commission and it helps the channel. Thank you for supporting.

Развлечения

Опубликовано:

 

13 май 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 88   
@jamesreese6428
@jamesreese6428 Месяц назад
Good morning , NC
@roller9158
@roller9158 Год назад
Never thought of having a separate bobbin case (Tension) for caps and resetting top tension. Here I thought one setting for everything. Thank You, Great video.
@noranevers
@noranevers 3 месяца назад
Watching the replay from Chelem, Yucatan, Mexico - originally from Texas - good to see all of the Tejas folks on.
@shoponeighteeen
@shoponeighteeen 3 месяца назад
Solid video right here with some nice visuals. I completely reset all my tension knobs and followed along with the steps. I had to do some minor adjustments with a couple of needles and now everything is DIALED. Will defiantly recommend this video to anyone experiencing tension issues. Thanks, Romero 👊🏼
@Cmakoman
@Cmakoman Год назад
Thank you so much for all that you share with us. I am new to Embroidery, and I need to learn every day. I watched this video TWICE! FANTASTIC !!!!
@theresas.439
@theresas.439 2 года назад
Fantastic video. A subject I never understood before, so your instruction is greatly appreciated. Thanks!
@callegra1
@callegra1 2 года назад
Thank you Ever for this video, I have learned something new.
@gailhardock1206
@gailhardock1206 2 года назад
Hi from Cochrane, Alberta CANADA. I usually catch your replays. I don't do a tension test often enough I know that. When I do my test stitch out and if the tension looks off then I do a tension test.
@djpeeweep
@djpeeweep Год назад
All for science! I love it thank you for this video!
@ireeshafox6075
@ireeshafox6075 Год назад
Thank you!!!! This video was really helpful especially for a beginner 🙌🏽
@RomeroThreads
@RomeroThreads Год назад
Glad it was helpful!
@MAC35REM
@MAC35REM Год назад
Thank you!!! I learned so much from this video. ❤️
@RomeroThreads
@RomeroThreads Год назад
Thank you Mali! Im glad you enjoyed the video.
@mbb5496
@mbb5496 Год назад
please make video on threads selection and what should we watch out for, for diff type of embroidery eg cap, tshirt, sweatshirts
@ianmcara9838
@ianmcara9838 2 месяца назад
loved this video. So helpful. Really helped me understand the detail needed to get it set up right. Thank you for all your great work.
@soniahenderson4208
@soniahenderson4208 8 месяцев назад
thank you much for this video. I have had my Ricoma EM1010 for a while now, haven't been able to use it because of the tension. This video makes it easier to do.
@RomeroThreads
@RomeroThreads 8 месяцев назад
Thank you Sonia! Glad the video helped.
@zehcnas1008
@zehcnas1008 Год назад
A book, yes!
@dreamarogers294
@dreamarogers294 7 месяцев назад
Thank you so much for the video. I have the correct tension on my Janome machine 550e!
@smilehappychild
@smilehappychild 2 года назад
Thank You!
@mark.serigrafia
@mark.serigrafia 9 месяцев назад
Thanks from Italy! 🙏
@bigdap100
@bigdap100 2 года назад
Great channel.👍✅
@irmaledezma
@irmaledezma Год назад
YOU ARE FANTASTIC THANK YOU
@natalieamezola2922
@natalieamezola2922 6 месяцев назад
THANK YOU FOR YOUR VIDEOS
@sweetp1015
@sweetp1015 Год назад
Thanks for this video. I have single needle machines now but waiting for my multi needle to come in. The tension knobs were a mystery to me. Now I feel like I know exactly what to do now. Thanks so much.
@RomeroThreads
@RomeroThreads Год назад
Glad it was helpful! Congrats on your new machine.
@LeJean_Dennis
@LeJean_Dennis 2 года назад
Thank you
@dorothyjones3945
@dorothyjones3945 3 месяца назад
I had my machine sonce Oct 2023 and had nothing but problems with this 1010 embroidery machine. Took me the longest ti finish my training cuz of thread breaks, needle break and now tebsion problems i was ready to give it back. I only completed the training and one cap now having thread breaks with every needle now trying to do a tension test and now my pattern is out if the hoop area.
@vonniemuniain5315
@vonniemuniain5315 11 месяцев назад
thank you!!
@bridgetgainous3196
@bridgetgainous3196 Год назад
Great video. Is the Superior Threads L-Style Towa Bobbin Tension Gauge - Measuring Tool only for magnetic bobbins?
@JWGasner
@JWGasner Год назад
Thanks!
@renabradshaw1597
@renabradshaw1597 Год назад
I hated my machine, but thanks to this video, I understand the I test and I believe this could have been the main problem.
@RomeroThreads
@RomeroThreads Год назад
Hello, yes, usually as long as the tension is good and your machine is all threaded correctly, it should run fine. Thanks for the comment.
@kathybaggett4062
@kathybaggett4062 Год назад
Good morning from Georgia
@dianematheis7666
@dianematheis7666 Год назад
Diane Matheis, NC
@user-dn8bm5cl2q
@user-dn8bm5cl2q 2 месяца назад
Sansone Jacobs from George, South Africa
@ShantaSmith
@ShantaSmith Год назад
THANK YOU, YOUR VIDEO IS WAY BETTER THAN RICOMA TUTORIALS, APPRECIATE YOU BROTHA
@LSTRND1
@LSTRND1 Год назад
What if you have too thick bobbin on all needles but when you tighten your bobbin but the bobbin case is too high using the towa?
@davidsims6585
@davidsims6585 3 месяца назад
You differentiate bobbin tension for flats and 3d puff hats, what about a normal 112 richardson cap? Not 3d puff? I read around 21-23?
@irmaledezma
@irmaledezma Год назад
What kind of oil should we purchase for Ricoma embroidery machine and where should we oil the machine?
@irmagomez3941
@irmagomez3941 Год назад
Thank you for posting these videos!! They are really helpful! I am having trouble with thread breaks and nesting when embroidering small letters (its always the same needle as I only have one dedicated for small lettering). I ran the tension test and it looks good so I am baffled on what to do. I am using a 60 weight thread and a 65/9 needle. I also rethreaded that needle to see if maybe it wasn't threaded correctly. I'm using the Madeira thread.. and I've tried a different brand to make sure that it wasn't the thread that was an issue. Do you have any suggestions for trouble shooting?
@RomeroThreads
@RomeroThreads Год назад
Yes, make sure the needle is facing the correct direction. That would be my best guess. Slow the machine down, and look up and down and see if the thread is catching on anything throughout the path.
@dorothyjones3945
@dorothyjones3945 3 месяца назад
Hello I'm using a b hoop how do i get the design inside the hoop of a 1010 embroidery machine and my panel si so much different from yours
@mhmosthated8697
@mhmosthated8697 8 месяцев назад
Heyy for hoodies and SweatPants should I keep tension at 200
@PedroSanchez-fh8vk
@PedroSanchez-fh8vk 2 года назад
Romero qué tal, crees que nos puedas dar unas clases en español?
@user-ch5px1vw6k
@user-ch5px1vw6k 4 месяца назад
What is good bobbin tension for regular hats?
@kathybaggett4062
@kathybaggett4062 Год назад
How do you run a eye test for tension on a EM 1010 ? I just got my machine and went through the training but did not show about how to do the eye test
@gericook6030
@gericook6030 11 месяцев назад
Hello from Peru Illinois
@DevinDiaz8
@DevinDiaz8 10 месяцев назад
Is the I test you did on the cap examples a special file or just the same as the flats I test?
@irmaledezma
@irmaledezma Год назад
Hello, I was thinking of your book maybe you could have a chapter regarding the differences between one-the softwares from the beginner friendly to the most advance and two the difference between each JPEG-DST Est… Three what machine goes to which files (the dst png est) I’m still learning that process, at the beginning of this Journey(embroidery ) I had no idea of the different files and their application.
@RomeroThreads
@RomeroThreads Год назад
Great Idea, I'll make note of this and make a video on this topic.
@NathanielParkinson
@NathanielParkinson Год назад
Is the I-test for puff different than the I-test for flats? Or can I use the same one? Very helpful video, thank you so much!
@RomeroThreads
@RomeroThreads Год назад
Ideally, you would want an I-test that has more density (0.18mm) and end caps. That way, when you remove the puff, it gets perforated correctly. Worst case scenario, you can use this same I-test, you just wont pull the puff smoothly.
@Ltscoobydoo
@Ltscoobydoo Год назад
Hello and thank you for this video and all that you do the help out the embroidery community. I did an I test, and what does it mean when there's more top thread on the left side than the right? (ie instead of the back showing 1/3 of each, it's showing more top thread on the left side than the right. Hopefully this makes sense😫.
@RomeroThreads
@RomeroThreads Год назад
That can happen, you can ensure the bobbin housing is completely clean. But if its just a bit to the side, it wont affect the stitching.
@Ltscoobydoo
@Ltscoobydoo Год назад
@@RomeroThreads thank you!!
@apostlelinda331
@apostlelinda331 Год назад
Hello I am having a huge problem I cant get my machine to sew out even the test nothing shows up when some of my needle try to sew
@debbiequarles645
@debbiequarles645 Год назад
Where can I get the tension downloads
@callegra1
@callegra1 2 года назад
Hi Ever, in the video I heard you say to "run the I test without putting the thread thru the pigtail in the bobbin"? Is this for the actual run on the machine? or just to test the tension using the TOWA tool? I am using the TOWA bobbin tension tool. I've had it for months! lol
@RomeroThreads
@RomeroThreads 2 года назад
Hello, thank you for the message. Thats only for the Towa gauge where you don't put it through the pig tail to get an accurate reading. Once its in the machine, yes, put the thread through the pig tail.
@davidsims6585
@davidsims6585 3 месяца назад
also could you put your I test for caps?
@aceboogie959
@aceboogie959 2 года назад
Hi, One quick question :" lets say they bobbin is to tight and we see a lot of upper thread on the backside of the embroidery. If the stitch out looks good, why should i adjust it" Till now i didn't find a person to answer this question for me. Btw, i love your work. I kbow machine embroidery is a niche and i assume you don't get much money out of the videos but i need to let you know that your work is very valuable to many of us. Much love from Berlin, Germany
@RomeroThreads
@RomeroThreads 2 года назад
Thank you for the comment Ace. As long as your top stitches look fine and the bottom isn't bunched up, then your good to go. Of course in a perfect world, everything will be spaced out evenly.
@aceboogie959
@aceboogie959 2 года назад
@@RomeroThreads thx for taking your time to answer me
@allegrachannel5422
@allegrachannel5422 Год назад
Thanks for video...great work. What type of bobbin thread do you use?
@RomeroThreads
@RomeroThreads Год назад
Filtec Magnetic bobbins
@allegrachannel5422
@allegrachannel5422 Год назад
@@RomeroThreads Ok, thanks for responding. Could you please tel me what type of underthread or bottom thread do you use? Can I use regular sewing cotton thread as bottom thread? Thanks.
@elinasila
@elinasila 2 года назад
Hi! Culd you please help me? After a new tentien test and all nops down like in the one from your live videos and up the nops, the machine left about two inches long thread after cutting. What should I doo to fix it? Thank you!
@RomeroThreads
@RomeroThreads 2 года назад
Hello, 1st make sure your tension is set good. If its good, you can adjust your thread tails with the settings on the machine.
@hustleletters8159
@hustleletters8159 2 года назад
What is the biggest size that can be done on the front of a hat centered like a normal hat
@RomeroThreads
@RomeroThreads 2 года назад
The biggest size Ive done is 3.25" high. I usually keep it at 2.5" high for my hats.
@kathybaggett4062
@kathybaggett4062 Год назад
My em1010 doesn’t have screws
@aerials4028
@aerials4028 5 месяцев назад
1-19 check , “ Here “ .
@SALWAMD
@SALWAMD 3 месяца назад
Hi, Romerio, I just received my BAI Embroidery 15-needle machine and I have set it up. I did a first embroidery test HHHH with multiple color threads, but it is only working with one needle and one color. After completing one letter, it stops and when I start again, it continues with the same color on needle number one. Can you please advise me on what I have done wrong?
@RomeroThreads
@RomeroThreads 3 месяца назад
Make sure your design is set for 15 H’s with different colors. And you set 15 colors on the machine.
@carinabam5833
@carinabam5833 2 месяца назад
how do you get your bobbin thread in the middle mine is off to one side?
@RomeroThreads
@RomeroThreads 2 месяца назад
I would clean out the entire bobbin housing. Something is making it off shift.
@VEINTI.8
@VEINTI.8 Год назад
how do you you the i test for a hat structure hat , example like yupoongs, flexit 110, richardson . would we run the i test on a hat ?
@RomeroThreads
@RomeroThreads Год назад
Hello, yes, I would. I have ran a 3d puff I test to test for hats. I’ll put that video on my to list, that would be a good topic to talk about, thanks for your question.
@VEINTI.8
@VEINTI.8 Год назад
@@RomeroThreads awesome i guess that would be something , i have the biggest issues with hats always pain.
@VEINTI.8
@VEINTI.8 Год назад
@@RomeroThreads so i set up my hat and i am doing the I test on it, also the file you proved fits perfect with the exception to 6 colors that didn't fit. but it's all good. hopefully i can get this ricoma dialed in
@RomeroThreads
@RomeroThreads Год назад
Yea, you can delete the ones that don’t fit. Let me know how it goes.
@VEINTI.8
@VEINTI.8 Год назад
@@RomeroThreads do you have a video on press foot gap on ricoma for structure hats ?
@mariannabornman2227
@mariannabornman2227 6 месяцев назад
Marianna from Windhoek Namibia.
@RomeroThreads
@RomeroThreads 6 месяцев назад
Hello Marianna, welcome to the class.
Далее
Week 21 - How much to charge for Embroidery
1:20:09
Просмотров 3 тыс.
Cabeças erguidas, galera! 🙌 Vamos pegá-la!
00:10
Dora does the Tyla Dance 😳 #shorts
00:16
Просмотров 1,2 млн
How to price your embroidery jobs- Math Required
29:02
The Rules of 3D Puff Embroidery (2024 ep:19)
1:50:56
Просмотров 2,3 тыс.
Adjusting Tension Live on on the MT-1501
41:33
Просмотров 2,7 тыс.
I Made $2,672 This Week With One Embroidery Machine
15:15
This Common Embroidery Machine Issue Is a NIGHTMARE
12:32
Embroidery Basics Master Class
25:04
Просмотров 8 тыс.
How to master embroidery TENSION before it masters you
26:24
3 Must Know Skills In Embroidery (2024 ep:15)
1:28:27
Просмотров 1,3 тыс.
Incredible magic 🤯✨
0:53
Просмотров 54 млн
Русалка
1:00
Просмотров 3 млн