Welding a flat roof ensuring it is watertight | High Tech Membrane Roofing | Essex Kent London

Подписаться 376

Просмотров 97 тыс.

50% 1

Welding a flat roof ensuring it is watertight | High Tech Membrane Roofing | Essex Kent London
www.hightechmembraneroofing.co...
Here is a member of our roof installation team welding a flat roof to ensure it is watertight and storm proof.
At High-Tech Membrane Roofing we only use the best materials - this enables us to offer a LIFETIME GUARANTEE.
So if you need a new flat roof then call us at High Tech Membrane Roofing. Covering Essex, Kent and London

Опубликовано:

7 дек 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@advancedue476 2 года назад

Love seeing the comments full or roofers 🤟🇲🇽🇺🇲

@paullindsay4798 Месяц назад

Went on the course for this but after doing 2 roof fast learned that your on your knees all day mine were killing. I jacked it and went to the glue down stuff or back to GPR

@gmdgmd952 3 года назад

Turn your heatgun down a bit and take your time on the corner and covering buttstraps and your not pre welding anything you’re looking for at least 50 to 60 mm weld

@michaelberry1793 3 года назад

Lovely bubbly

@mirbaum 3 года назад

👍

@anthonymartin7229 2 года назад

Buttstrap goes under your drip not just welded to the face. Lack of corner detail to raggle. Upstart should be barred down with field sheet then coverstrip. Good effort for your first attempt thankfully not my roof 😂

@advancedue476 2 года назад

Is it a pvc? Saw the bleed out on the last weld but it also seemed like his gun was on 10😂

@arunkumarsarunkumars209 2 года назад

This sheet uae ware Available...?

@jonnydanger7181 3 года назад

Field sheet must be wrapped 4” down over the edge with the sheet metal flashing installed over field sheet to assure attachment. Sheet metal flange then stripped in with 8” wide heat weld strip. This work must be stripped off and reworked.

@beauthornton793 3 года назад

We’re the roofers, we know how it goes. Mind your own business.

@scottpaterson9821 2 года назад

Yeeeha

@PeakyBlinder 2 года назад

Agreed, this is a poor instal, Please don't follow this, SPRA would love to see this,

@Crazyman1212 3 года назад

Your welding a little too quick, especially your pre welds. Turn that your welder down to 7 and go half your current speed.

@advancedue476 2 года назад

Fr had it on a 10 right there at the end for sure

@MrFlatroofer 2 года назад

I have just replaced a single ply roof,15 years old. The product itself was good, but the decking underneath had rotted and not safe to work on and there was 2 cuts on the upstand.

@jonnydanger7181 2 года назад

Sounds like a condensation issue. Did you add insulation?

@MrFlatroofer 2 года назад

@@jonnydanger7181 I added insulation ,but the contractor laying the single ply did not.

@jonnydanger7181 2 года назад

@@MrFlatroofer good job sir 👍