Тёмный

What a thrill! Flying FT Mini Scout with Servo-Pan Caddx Tarsier FPV camera 

RCwithAdam
Подписаться 43 тыс.
Просмотров 3 тыс.
50% 1

You asked for it! I added a First-Person-View camera to the FliteTest Mini Scout. I also added a servo for a SUPER neat controllable panning ability! Wow! Let's see how it flies and if I can NOT crash it fantastically!See THIS video • Not for Backyards, but... for more details on the Mini Scout and electronics used (including the SonicModell power combo). Enjoy my work? Consider supporting me ko-fi.com/rcwi...
More videos and resources on my website rcwithadam.com/
You can also support RCwithAdam by shopping through these affiliate links! (really, your support DOES make a difference!)
Amazon amzn.to/2FHjkwI
Banggood www.banggood.c...
THANK YOU!
▶️ FlySky videos here! • FLYSKY Tutorials, Tips...
📕 FlySky i6X manual: www.flysky-cn....
📘 FlySky i6S manual: www.flysky-cn....
📂 FlySky firmware on GitHub: github.com/ope...
-------
Mandatory Disclaimer:
I participate in Affiliates programs (Amazon, Banggood) so, if you click on one of the above and make a purchase, I may receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft. Be a good neighbor, and HAVE FUN!*
-----------
About RC with Adam: Adam's goal is to help YOU build COMPETENCE and CONFIDENCE in the RC hobby (and beyond!) through creative, educational, and encouraging videos featuring Radio Control airplanes, drones, electronics, and 3D printing!
#RCwithAdam #flitetest #fpv

Опубликовано:

 

14 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@theorangebaron1595
@theorangebaron1595 3 года назад
On my foam board servo rover, I mixed the rudder with the camera pan servo.
@RCwithAdam1
@RCwithAdam1 3 года назад
Good idea!
@VLena_art
@VLena_art 3 года назад
Adam should do that.
@Joe_Zajac
@Joe_Zajac 3 года назад
Mini Scout is 3 channel so rudder is acting as aileron. Flying quads and 4ch planes most of the time makes 3ch seem really weird. But should still work on 3ch-just don’t mix in too much rudder. Mixing would work even better for a 4 channel plane. I need to put fpv on my 4ch version of FT explorer. No prop in the way!
@danielvennink8364
@danielvennink8364 3 года назад
Wow 🤩
@danielvennink8364
@danielvennink8364 3 года назад
Cool man
@RCwithAdam1
@RCwithAdam1 3 года назад
Thanks
@immanuelkugler62
@immanuelkugler62 3 года назад
Yes! You did it! 😊
@CaptainCandycorn
@CaptainCandycorn 2 года назад
I just ordered the parts for this build, but I went with a 2s 500mah battery because I want to fly slow and floaty. Hope it works out
@curiouslife6014
@curiouslife6014 3 года назад
Awesome
@ronaldwitt2533
@ronaldwitt2533 3 года назад
Good job
@RCwithAdam1
@RCwithAdam1 3 года назад
Thanks!
@MSmith-jf5wo
@MSmith-jf5wo 3 года назад
Got the FT Mini Scout on my workbench right now (haven't glued it together, though), and THIS Video gives me a chance to see how to mount a camera on it (not that I will mount on a servo, though!). Let's face it --- I'm CHEAP...! An airplane that cost about a Buck, a camera that was less than $12, a Very Well Used motor and esc ($5 Bucks at a swap meet), 2 nearly worn out 5g. servos, a battery made from 3 single cells, and a $5 Rx. with only 4 channels, what MORE can I save on? (Bet I don't have over $25 invested...!) Haha! Yes, I have other planes too. A boxed Eflite Slick 3-D 480 with all the "trimmings" needed to complete it (but I'm not good enough to fly it - yet!). I'll contend to fly FT Models, until I don't make "Final Landings" every time I try to fly. Thanks for the inspiration, Adam...
@immanuelkugler62
@immanuelkugler62 3 года назад
You could stick a foamboard rudder to the camera to help the airplane turning.
@VLena_art
@VLena_art 3 года назад
U actualy did it!
@RCwithAdam1
@RCwithAdam1 3 года назад
😁
@mutantthegreat7963
@mutantthegreat7963 3 года назад
That was a lucky near miss at the end!
@RCwithAdam1
@RCwithAdam1 3 года назад
Oh yeah!
@TrueT1me
@TrueT1me 3 года назад
You need only up set camera to use gimbal full
@TrueT1me
@TrueT1me 3 года назад
Why not do 3 Axis Gimbal control
@RCwithAdam1
@RCwithAdam1 3 года назад
Good question. That would definitely be smoother, but I don't have a 3-axis gimbal rig, and I think one would not fit on this plane.
@payaso2297
@payaso2297 3 года назад
Why ads
Далее
Solusi merangkai servo pan & tilt
32:48
Просмотров 1,6 тыс.
ТИПИЧНОЕ ПОВЕДЕНИЕ МАМЫ
00:21
Просмотров 1,4 млн
다리찢기 고인물⁉️😱 Leg Splits Challenge
00:37
Flite Test | FT Mini Scout - BUILD (Mighty Minis)
44:19
NewBeeDrone $89 FPV Race Spec Tiny Whoop!  Wow!!!
7:37
Просмотров 1,7 тыс.
FliteTest Mini Scout - Build (#1) and Maiden Flight
16:39
DIY FT SIMPLE SCOUT - Build | FLITE TEST
1:29:25
Просмотров 304 тыс.
RC Plane (FT-Scout) Time-Lapse/Montage Build!
5:12
Просмотров 16 тыс.