No video :(

What Compressor Do I Need For My Soda Blaster?

Подписаться 5 тыс.

Просмотров 23 тыс.

50% 1

Tools recommended in Video:
soda blasting gun: amzn.to/3xzVEpx
desiccant dryer/filter, regulator: amzn.to/3j5IUmu
In this video, I attempt to answer the question, "What compressor Do I need for My Soda Blaster?" I outline how to identify the specifications of the tool you're choosing and the specifications of the compressor. I also answer the question of how to avoid clogging your soda blaster and the importance of the filter and desiccant dryer. Thanks for watching and let me know if you have any questions, thanks!
Specs on soda blaster: Powerful Sandblaster: With an operating pressure of 90-150 PSI with a recommended CFM of 7-12

Опубликовано:

18 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@kmcclarney Год назад

Excellent video. Especially about the moisture filter. I blast on the ground and I use large used cardboard boxe to place the items on.

@the323vlog4 Год назад

As soon as I posted the video, I thought, “why didn’t I mention the containment tents?” Ughh…maybe next video ;)

@kmcclarney Год назад

@the323vlog4 hahah. .you did good. Keep the content coming. Super valuable

@the323vlog4 Год назад

@@kmcclarney thanks!

@Alicia_Michelle 2 месяца назад

What compressor did you endup with?

@matthewstorm5188 9 месяцев назад

One good option if you don’t want a large tank and/or don’t have a 240V outlet is a gas powered compressor. Gas powered compressors are usually even more powerful than 240V compressors, and can be used anywhere. However, if working indoors, you want to use a long hose so that the compressor can safely be used outdoors.

@the323vlog4 9 месяцев назад

Thanks for the advice!

@trevcessna1723 Год назад

Great video! What do you suggest for the air line diameter and fittings? I have 3/8” NPT 30 gallon but your filter system is 1/2” so is that likely what you will need with a 60 gallon compressor? Thanks so much!

@the323vlog4 Год назад

I honestly Don’t have a recommendation. :) I just went with what came with mine .

@FaithandFurniture 10 месяцев назад

Does the ingersol rand 80 gallo have a 22volt plug? I have been using my grandparents 30 year old 20 gallon compressor so I need to upgrade but do not have a 220 volt plug. Thanks, videos are great!

@the323vlog4 10 месяцев назад

Yes, it does. I had an electrician add a separate breaker for it

@matthewstorm5188 9 месяцев назад

You might also look into using a gas powered compressor. Although they are usually significantly more expensive than electric compressors, a gas powered compressor may be cost competitive if you have to hire an electrician. Also, pretty much ANY gas powered compressor is going to supply the SCFM you need. And because of the sheer muscle of a gas powered compressor (vs most any electric compressor), you don’t need a big tank.

@davidj.gallardo4553 Год назад

Boone, using the blaster to sand wood furniture, especially that with a lot of detail and pattern where it is hard to get to with conventional sanding, is a brilliant solution to make the project easier.... Soda works great however, it is a natural weed killer and will kill plants around a working area it touches... have you used other median that works as good as soda that will not damage the wood?

@the323vlog4 Год назад

I have used a few other media, but nothing that isn’t as gentle as soda. I don’t have to worry about the plants and grass because I use mine around concrete. If you’re worried about that issue, a spray tent is a good idea that has been recommended before

@katherineheislup6010 Год назад

So does the gun come as an attachment to Harbor freight soda blaster, or is it a different system altogether? I got the harbor freight one for Christmas but I'm not sure it's going to be good enough for my tougher pieces of furniture.

@the323vlog4 Год назад

It is a different system altogether

@katherineheislup6010 Год назад

@@the323vlog4 and you like the one in this video better, right?

@the323vlog4 Год назад

@@katherineheislup6010 yes, but in all Fairness, I never tried the other one with the proper air filter and dryer. That mag have made a difference

@MemphisGal Год назад

I'm determined to use the Lematec pickup tube soda blaster to strip some chairs, tables, and dressers. I *can* buy an air compressor if I have to but that's a lot for my "girl hobby"--I work full time and so this is a hobby. For the time being, I found a Mi-T-M brand AC I can rent for $57 a day. The specs on it say 13.1 cfm @ 90 psi. I looked it up on Google and it's 8 gallon but you said your Ingersoll Rand is 80 gallon. Am I off base with this one? If I'm going to pay over ~$1600 I'm going to have to drop back and use chemical stripper and sanding. Is the air compressor you have very different from this Mi-T-M?

@the323vlog4 Год назад

Not familiar with that compressor, but if the specs line up with the recommended requirements of the gun it should work.

@bryandecker3259 Год назад

Just a Heads Up, The Link For The Soda Gun Leads To Filter Regulator. was going use your link to order the gun. ok have a great day or night.

@the323vlog4 Год назад

Thanks for the heads up! I corrected it

@irenedeblouge29 8 месяцев назад

can anyone advise with removing layers of paint from inside architraves, doorways, windows, even an old fireplace, cement and brick, I am thinking of buying a Le Lematec although we can't buy them here in Australia. Have to order from US, huge postage costs, so want to be sure it will be a good idea. I have done lots of paint stripping just using chemicals stuff that you paint on, scrape off. Messy, toxic, expensive but am thinking maybe that's my only option. Also has anyone used these guns inside. How do you deal with the mess. Sand, soda whatever you use must go everywhere and get into everything.

@the323vlog4 8 месяцев назад

I honestly don’t think it would be a good candidate for that circumstance. It’s not great at removing paint, especially latex paint common in homes. It would also be a very messy option and I can’t think of an efficient way to remedy that. Have you checked out the new laser removal tools? Expensive, but they look efficient for something like you’ve mentioned

@Platinumcoons Год назад

How do you deal with short feeding tube

@the323vlog4 Год назад

I haven’t had to deal with that issue. I would engineer one longer I suppose

@jshaw8365 2 месяца назад

Hi Boone, I’m writing from Australia and needing to find all similar products but from Aussie suppliers … so the information is brilliant, I do have a kinda odd question, how long do you find a 25 kilo bag of soda lasts, as in how many projects approx. Thank you - you are v inspiring

@the323vlog4 2 месяца назад

My 50 lb bags usually last around 60-90 minutes of continuous spraying.

@jshaw8365 2 месяца назад

@@the323vlog4 thank you, makes it quite an expensive way to remove old paint at $100 per bag …. maybe should just use for difficult to reach areas

@jeremyheroth5866 Год назад

Will this gun sandblast paint off a door ?

@the323vlog4 Год назад

Depends on the age, condition, and paint used. I’ve only had minor success on painted items, so I wouldn’t expect great results

@squash419 Год назад

Will it take off layers of paint

@the323vlog4 Год назад

I have had success with a few paints. It depends on how many layers, their durability, etc. usually no luck with lead based.

@michaeljamesdesign 21 день назад

A 60 gallon tank is over 200 litres. That's one hell of a tank. That's huge. There's no way that's portable. You're talking about having a permanent fixture in your workshop. Also, if it's going to knock out over 14cfm then you can't run it on a standard 240v domestic system so you need a proper workshop 3 phase system. And they have to be specially installed - at great expense.

@the323vlog4 21 день назад

What I use does not require 3 phase and it handles the blaster just fine. And it’s definitely not a mobile/portable setup, which hopefully I didn’t lead anyone to believe that

@bilgedemirbas383 Год назад

Can you use soda blaster to refinish indoor hardwood floors?

@the323vlog4 Год назад

I wouldn't. IMO it would be too messy unless you had one with a vacuum attachment. I have recently them being used online, but mine is definitely not equipped for that. It creates a lot of dust and it lingers.

@bilgedemirbas383 Год назад

@@the323vlog4 apart from the dust, will it provide sufficient sanding comparing to drum sanders or orbital sanders?

@the323vlog4 Год назад

It really boils down to the condition of the finish. If it’s an older and worn out finish it would probably work well

@henmich 3 месяца назад

60 gallon?? That's the size of the tank. You need cfm. If you want real numbers you need a rotary compressor, but be ready to spend some money and graduate to three phase.

@the323vlog4 3 месяца назад

I agree, I’m speaking to folks who will have access to big box store compressors and regular electrical. Great input

@ibnrochd6078 Год назад

fuck... 60 gallons,... let's google how much liters that is...

@the323vlog4 Год назад

Ok…

@Alicia_Michelle 2 месяца назад

What 60gal were you going to get, there are a few of that size? Please add a link if it's no trouble =) I'm saving to buy! I also would like to buy from tractor supply.

@the323vlog4 2 месяца назад

I got the Ingersol Rand. www.tractorsupply.com/tsc/product/ingersoll-rand-5-hp-single-stage-twin-cylinder-pro-air-compressor-60-gal