What Did Turners Warehouse Send Me??? Mystery Resin Casting and Woodturning Project

Подписаться 70 тыс.

Просмотров 3,4 тыс.

50% 1

It's Mystery Box time!! Turners Warehouse sent me a box with something in it that I will need to cast a blank and turn a project for. This is going to be fun!!
👉Check out my e-book "The Beginner's Guide to Resin Casting:" Learn more at resinwerksstud...
Links to products used in this video:
✅ Easy Wood Tools Carbide Turning Tools: www.turnerswar...
✅ Pepper Grinder Kit: www.turnerswar...
✅ Easy Chuck: amzn.to/3LgvI7B
✅ Alumilite Clear Slow resin: www.alumilite....
✅ UV Resin: www.turnerswar...
✅ UV Curing Machine: amzn.to/3aXRYXb
✅ Abranet Sandpaper Rolls: amzn.to/3tJo4MK
✅ Pipe Molds & Plugs: www.turnerswar...
Some links herein are affiliate links that let vendors know I referred you to them,. If you use my links, I get a referral bonus from the vendor. Thank you for using my links to help support the show!
Order Alumilite resin or silicone with my affiliate link: www.alumilite.com?aff=46 and save 10% on your first order by entering code Zac10 during checkout
Looking for turning or resin casting supplies? Turners Warehouse has everything you need! www.turnerswar...
Shop on Amazon and support the show! amzn.to/3tP5XVQ
Become a Patron today to support the show and get access to bonus content: / resinwerksstudio
Looking for turning or resin casting supplies? Turners Warehouse has everything you need! www.turnerswar...
Check out our resin casting audio podcast, "The Resin Cast," where Casey Martin and I discuss all things resin casting, turning, and stabilizing. Subscribe on your favorite podcast provider or listen on our website: theresincast.com/
What tools and supplies do I use? Check out my "Tools I Use" page on my website for links: resinwerksstud...
Shop the Resin Werks Studio Pen Blank Store, over 80 different styles of pen blanks in stock: resinwerksstud...
-------Make sure to follow me on social media for all the news and updates
Instagram: / resinwerksstudio
Facebook: / resinwerksstudio
Twitter: / resin_werks @resin_werks
Pinterest: / resinwerksstudio
#resincasting #lathe #woodturning
Music Source - Epidemic Sound: www.epidemicso...

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@SmokingWoodsman 2 года назад

I've made a few of those grinders and my only complaint about them is the angle to get the screws in, awesome turning and video. I vote to keep doing the mystery boxes.

@ZacHiggins 2 года назад

Thanks for the feedback Frank! I agree, that angle on the screws is not ideal at all. Just a matter of taking your time though, luckily it's only two screws

@PennsPens 23 дня назад

Such a cool showpiece to have on the dinner table. What an awesome idea. Hopefully, TurnersWarehouse are still providing these projects - Brilliant watch Zak 👍

@Kathy-Carr 2 года назад

You did a great job on this…very labor intensive. But the end result is very pretty!

@ZacHiggins 2 года назад

Thanks Kathy! It took some work, but it was all so worth it!!

@paintcandan5972 2 года назад

that blank came out awesome!

@ZacHiggins 2 года назад

Thanks so much!!

@ChadSchimmel 2 года назад

Zac that was super fun to watch. Love the base idea so cool. Cast looked awesome thanks for making the video

@ZacHiggins 2 года назад

Thanks Chad, you guys did such a good job with this!! I had a blast making it, can't wait for the next one 🙌🙌

@kimthomas4538 2 года назад

Looking awesome, great fun to watch you run round in circles trying to pick things with no clue what for. The finished item could go on the shelf as an ornament when not in use, great project. Well done

@ZacHiggins 2 года назад

Thanks Kim! LOL I know, it was really fun scrambling for things. I can't wait to see what's in store for the next Mystery Box!!

@leliaguinn5307 2 года назад

What a cool mystery box. I love the peppermill. Thanks for showing us how to make one. The base just makes it look finished.

@ZacHiggins 2 года назад

Thanks Lelia! It was so fun to make! Yeah, I think the base is a really cool addition to this piece, really finishes it off

@daveporter2555 2 года назад

That thing turned out really nice!!! I didn't think I'd like the fabric in it, but I was wrong. 👍.

@ZacHiggins 2 года назад

Thanks Dave! Yeah, the fabric scraps turn out surprisingly cool looking. I've done a couple other projects with them before

@PotgieterWoodturning 2 года назад

That did look like major fun. I really like the blanks you made and end result was beautiful. Great job Zac

@ZacHiggins 2 года назад

Thanks so much!! It really was a fun thing to do, can't wait for the next mystery box project 😀

@Horsewomann 2 года назад

Very nice! I’ve been wanting to make my own pepper mill since I started turning. This kit looks to be right at my skill level!

@ZacHiggins 2 года назад

Awesome! I think you’ll enjoy making this, it’s pretty simple to make and a lot of fun! 😀

@marklengal9990 2 года назад

These pepper mills are really fun to make , especially for beginners. The only downside is you have to fill them so often. Great job Zac

@ZacHiggins 2 года назад

I'm really glad the grinder kit was what I got to make. It was super fun!! Great project for beginners for sure!

@walonguy111 2 года назад

Zac I have been getting more into resin and your videos serve as great instruction and inspiration, you do awesome work. The pepper grinder was very cool. Keep up the great work.

@ZacHiggins 2 года назад

I'm so glad to hear that they are helpful!! Thanks for the kind words 😀

@SaintBigAl 2 года назад

WOW,that turned out awesome! no pun intended. The base was a great idea. Maybe make the base deeper for extra ground pepper? Very nice mystery project.

@ZacHiggins 2 года назад

Thanks so much! Yeah, you could make the base any size/shape. Lots of room for creativity there!

@marknienstadt6963 2 года назад

I like the base idea. I would use it to catch the ground pepper instead of just onto a plate or towel.

@ZacHiggins 2 года назад

I really like the base too. We have a pepper grinder at home, and it's got a nice pile of pepper under it LOL

@joekillet4236 2 года назад

Great idea for a gift, you gave me some good food for thought

@ZacHiggins 2 года назад

Nice!! It really was a fun project, I think you'll enjoy making one 😀

@LucillenRory 2 года назад

I Love this - such an elegant way to make it and the base is a great idea - seems like a fun thing to get a mystery box especially when its something you havent made before.

@ZacHiggins 2 года назад

Thanks so much!! It was so much fun to do! I haven't done anything like a mystery box before, it was pretty exciting 😀

@bobchronister3429 2 года назад

Outstanding. That turned out great.

@ZacHiggins 2 года назад

Thanks Bob! 👊

@chrisgriego549 2 года назад

love the idea. I think it was fun to see how you gathered random supplies and then used them. I think you did a pretty good job of gathering supplies that could be used in an unknown project. I also liked the base idea as I too thought about the bits falling out when you placed it back down after turning your pepper. I also would have hated to see that material left after parting off the actual dispenser go to waste.

@ZacHiggins 2 года назад

Thanks for all the feedback on this project. We'll definitely do more mystery box videos, coming soon 😀

@ConnieConnie824 2 года назад

That was such a fun mystery box 😁 It came out Amazing 🥰

@ZacHiggins 2 года назад

Thanks Connie! I had so much fun with this, can't wait for the next one 🙌🙌

@alchemistwoodwork 2 года назад

Casting on the fly! Great video, Zac!

@ZacHiggins 2 года назад

Thanks David! I was truly flying by the seat of my pants LOL It was fun!!

@alchemistwoodwork 2 года назад

@@ZacHiggins Heck yea! What a fun project too!

@clydecarden6612 2 года назад

great idea for a fun box. your on the fly color and other stuff was way cool. i would like to a salt and pepper set.

@ZacHiggins 2 года назад

LOL I was flying by the seat of my pants on this one! Yeah, a set would be really cool! Might have to make a matching salt shaker for this 🤔

@davidzindman 2 года назад

Zac this was a great idea a mystery box I think you did awesome thanks

@ZacHiggins 2 года назад

Thanks David! It was a really fun project, and I'm glad you enjoyed it 🙌🙌

@sounds.like.onomatopoeia 2 года назад

More mystery boxes, please!

@ZacHiggins 2 года назад

Yess!!!! Talked to Chad today already, they're already thinking of ways to improve the process and make it even more fun =D

@kevinkronewitter3374 2 года назад

Very interesting challenge. Well done.

@ZacHiggins 2 года назад

LOL I was a little worried when it started out with a 60 second time clock! 😆 Luckily, it all worked out!

@tja490 2 года назад

Very cool. Next time consider replacing the wood crank handle with one of the same material as the casting. Nice!

@ZacHiggins 2 года назад

Thanks Tom! Great idea for the handle!!

@frankfowler8295 2 года назад

lookes like a fun project Zac! Thanks for the video.

@ZacHiggins 2 года назад

Thanks Frank! It was super fun 🙌🙌

@Paul-Coburn 2 года назад

Good looking piece Zac

@ZacHiggins 2 года назад

Thanks Paul!

@lanceo235 2 года назад

That was a really great video! I enjoyed the mystery box aspect a lot. The pepper mill kit is nice as well the ones I have looked at previously seemed very daunting.

@ZacHiggins 2 года назад

I'm so glad you enjoyed it! Yeah, it was a super easy kit, far less hassle than the other style grinder kits

@plooms1 2 года назад

Beautiful

@carriemyre5809 2 года назад

that turned out great Zac!

@ZacHiggins 2 года назад

Thanks Carrie!

@shanehurst31 2 года назад

Great job Zac thanks for sharing

@ZacHiggins 2 года назад

My pleasure!! I had a blast with this 😀

@inspectr1949 2 года назад

Can make these 3 times faster than conventional mills so they are big sellers at craft fairs but the challenge is to be creative and artistic you certainly did just that even got a great tip on finishing, thank you Zac.

@ZacHiggins 2 года назад

Oh yeah, I hadn't even thought about that. Way faster than the other grinder kits! These are pretty cool, you can really dive into any design you want to go for, no limitations really. I'm glad to hear the UV finish might help out. It's a pretty decent way to go for something like this

@TetraCNC 2 года назад

Loved it. I may have to have "The Chad" send me one. Look forward to more Mystery boxes.

@ZacHiggins 2 года назад

Definitely! I hope you have fun making one if you get one 😀

@cheryldoty8300 2 года назад

That is awesome looking. Never done more than pens and even a coffee scoop for my brother. Might have to try this at some point

@ZacHiggins 2 года назад

Thanks Cheryl! I hope you do try it out, they are a blast to make! I think you'll really enjoy it 😀

@erfrulla 2 года назад

I think a monthly mystery box is a cool idea. Not only do we get to see different products but we get to see how you address the build and any surprises that pop up. What is the UV product that you used?

@ZacHiggins 2 года назад

Awesome!! Thanks for the feedback Ed! We are planning to do more mystery boxes for sure! The UV resin is Alumi UV. There's a link in the description of this video (always check the descriptions first, I try to put relevant links in there), but here's a link as well: www.turnerswarehouse.com/products/alumi-uv-uv-resin?ref=nvww

@jonnyslathecrafts 2 года назад

Thanks for the video. I've been wanting to turn a pepper mill. I may have to do one from Turners Warehouse.

@ZacHiggins 2 года назад

My pleasure! Glad you enjoyed the video 😀 I hope you try one of these out, it was a really fun project!

@mikekemper34 2 года назад

I make those all the time out of wood. I made some alloy bushings that allows my to use a pen mandrel for easier turning, I use either a faceplate or a chuck to drill the hole, then I use the bushings and square my ends off of them

@ZacHiggins 2 года назад

Nice setup!! They are so fun to make, you can really crank them out with a custom setup I bet!

@mikekemper34 2 года назад

Drilling is my biggest challenge, but yeah, I can crank them out fairly quick, I use a thin piece of plywood to act as my drilling guide and turning guide so that I don't go to small

@tomzahlman1156 2 года назад

Very cool

@WoodenItBeNice 2 года назад

Hi Zac, Fantastic pepper grinder. I have made quite a few of these using wood and they are great sellers at craft fairs. Great video Zac. Take care mate. Cheers, Huw

@ZacHiggins 2 года назад

Ahh, yeah I bet they do well at craft fairs, thanks for mentioning that. Have a great week Huw!

@chammers7377 2 года назад

had just been thinking about making a pepper mill actually... though I wasn't that keen on this style, it sure seems a lot simpler to make.. the idea of having a base for it is a great addition

@ZacHiggins 2 года назад

Yeah, I had only seen the other style of pepper grinder kits, and they are a bit more involved (probably why I hadn't made one before). this was simple and really fun to make!

@barbfilion5646 Год назад

Awessome, looks great...love pepper. Gift you say...lol

@bobchronister3429 2 года назад

You could probably use the grinder to make your own custom glitter.

@ZacHiggins 2 года назад

I love that idea!! 😆🙌🙌

@xpoxydesignz5003 Год назад

It was amazing

@djcoinninja1649 2 года назад

thanks now i got another thing i need to make lol

@ZacHiggins 2 года назад

It was my pleasure 🤣

@homerlex 2 года назад

Very cool. You'll have to try casting some of those peppercorns :). BTW, another option if you need a longer forstner bit is to buy an extension.

@ZacHiggins 2 года назад

I've seen that Peter Brown video, think I'll pass on turning pepper LOL

@homerlex 2 года назад

@@ZacHiggins Pepper spray from the lathe. :).

@VictorAntonioLive 2 года назад

Always great to see a pro work; picked up many tips. Question: What cameras do you use? And how do you like the DJI clip mic? (sounds good to me)

@ZacHiggins 2 года назад

I'm so glad that it was helpful!! I just use my iPhone 13 Pro for regular videos, it's just so easy to use, compact, and it shoots pretty good video too. I have different cameras for the live stream footage. I have links to most of the gear I use on my website: resinwerksstudio.com/pages/tools I really like the DJI mic. It's super simple to use, sounds good without even needing to connect a lav mic to the transmitter, and it can even record direct to the transmitter or camera... or both and have a backup.

@dwaynebroadhead5310 2 года назад

When is the next live hoping I can be there love your videos

@ZacHiggins 2 года назад

Hey Dwayne, I usually stream on Wednesdays at 3pm pacific time and Saturdays at noon PT. I didn't do any last week because I had a few family obligations that I needed to take care of. Back in action next week though!

@phillipchristy7792 2 года назад

Awesome

@ZacHiggins 2 года назад

💪💪💪

@Nennine001 2 года назад

That is sooo cool. I want one. LOL

@ZacHiggins 2 года назад

Woohoo!! 👊They are definitely fun to make 😀

@Nennine001 2 года назад

@@ZacHiggins First time a RU-vidr has responded to my comments. Thank you I appreciate that. Hugs from NC

@ZacHiggins 2 года назад

@@Nennine001 I'm glad that I could cheer up your day 😀I try to respond to all the comments I can

@jencstephens5452 2 года назад

This is a great project, and I love the finish. The mystery box is fun. 😊 Do you have a video showing step by step how to do the coating? If so, could you please provide the link. Ya, it does look easy, however my main question is what grit do you sand to before applying, what grit do you use between coats?

@ZacHiggins 2 года назад

Thanks Jen, glad you enjoyed it! I don't have a video specifically on applying UV finishes. I just sand to around 600 grit and apply a coat. Between coats, you can just scuff with 600 if the surface is pretty smooth, or drop down as needed to smooth things out and go back up to 600 before applying the next coat(s)

@jencstephens5452 2 года назад

@@ZacHiggins Thanks for the information, much appreciated 🙂

@daletprescott3458 2 года назад

I see that you check the temp of resin. Dose that help with the turning I've been useing resin, but it seem to be to hard when I turn it I get hit with small pieces. Can tell what I'm doing wrong. The pepper mill looks good I've done a few put none like that.

@ZacHiggins 2 года назад

Thanks Dale! The temperature only has to do with the pouring of the resin, looking for a specific viscosity and timing of the pour. If you are finding the resin is hard, it's just the resin you are using. Each resin formula is different. You may try using a negative rake carbide cutter if you aren't already. That should help tame brittle or chippy resin. You can check them out at Turners Warehouse: www.turnerswarehouse.com/products/easy-wood-tools-carbide-cutters?ref=nvww&variant=13527856709715

@rich_wood_resin_works 2 года назад

Hi Zac great video as usual! I never would’ve thought to use UV resin in that way, as a topcoat. I’m surprised it didn’t leave brush marks?

@ZacHiggins 2 года назад

That's the beauty of keeping it spinning and having unlimited working time. Wait until it's perfect, then lock it in 😀

@dwaynebroadhead5310 2 года назад

This is so awesome I have been waiting on you to do a peppermint for a long time, what was the pipe length and how many grams of resin, you done a Beautiful job

@ZacHiggins 2 года назад

Thanks Dwayne! I'm glad you enjoyed it! I think the pipe was about 6", not sure how much resin off hand, around 650 or so maybe

@kentieber7309 2 года назад

This was awesome. i love watching mystery box videos. i have never made something like this but it makes me want to give it a try. Do you have a link too the UV finish you used and would it work on wood pens as well? I saw that and thought it may be a better more durable finish on pens than the CA finish i have been doing. Thank you and keep up the great videos

@ZacHiggins 2 года назад

Thanks Ken! I'm glad you enjoyed it 🙌🙌 I have links to the products I used in the video description above. Here's a link to the UV resin at Turners Warehouse though:www.turnerswarehouse.com/products/alumi-uv-uv-resin?ref=nvww I am not a big fan of UV resin for pens personally. I find that you can get CA finishes on, sanded smooth, and polished much quicker than UV resin since you can use accelerator. I cure the UV resin for 30 minutes each coat, so it's just not really worth it. I like to use it on medium size projects, especially ones that have lots of curves that would make it really difficult to get a CA finish applied. Having said that, I think it's a great idea to give it a try for yourself though. It may turn out to be your favorite method of finishing pens. I don't see it as a waste of money even if you don't like it for pen finishes either. It's so useful for a variety of things, nice to have on hand

@derekschalk9772 2 года назад

Very cool. I've been meaning to ask did you ever say what resin you prefer to use with 3d printing for blanks?

@ZacHiggins 2 года назад

Thanks Derek! I use the Elegoo ABS like right now for prints. There are lots that will work great, just need to find one that is not too brittle

@MarklTucson 2 года назад

Very cool project and the mystery box was a fun idea. I’ve looked at these kits before and have been somewhat put off by the lack of forethought by the designers in screw placement. Seems good engineering would design a clear path for the screw attachment. That said, I still want to make one in the future. Your idea of making a base that captures the residual powder was brilliant. A question, did you cast the screwdriver handle shown in the video?

@ZacHiggins 2 года назад

I agree, not the greatest design with how those screws are, but it seemed to work out fine with a little patience and extra care. Yes, I did make the screwdriver. Got a video on it too if you want to see how I made it, really fun project! 😀 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dWdkopwctG0.html

@MarklTucson 2 года назад

@@ZacHiggins Thanks for the link! That gives me some more ideas for future projects

@JSGilbert 2 года назад

Nice. I’m wondering what and from where your UV bath is. Thanks.

@billcornett2256 2 года назад

Me too.

@ZacHiggins 2 года назад

Thanks! Sorry for not mentioning the UV light, the video was already so long, I just didn't want to squeeze more of me talking in. It's just a nail curing machine I got on Amazon. It works pretty well once you get it set up at the right height. I like the model I have because you can set it to stay on for about 15 minutes. I couldn't find any that you could just leave on without an automatic timer, and most only stayed on for a minute or so. I run it twice just to make sure the resin is fully cured. Here's a link to the one I have: amzn.to/3aXRYXb

@yakbranson 2 года назад

How did you get all the fabric and that whole tub of scraps in that little mold!?🤔🤣

@ZacHiggins 2 года назад

LOL it's bigger on the inside 🤣

@aaronhankins453 2 года назад

Great video. What kind of UV activated glue/epoxy are you using? Thanks

@aaronhankins453 2 года назад

nevermind I answered my own question by checking the links. Thanks

@pamelalittlefield4608 2 года назад

❤❤❤

@ZacHiggins 2 года назад

🙏🙏 😀

@plooms1 2 года назад

What is the dye you used do u have a link?

@plooms1 2 года назад

I would also like to know more about that resin UV resin do you have a video on it to explain it

@ZacHiggins 2 года назад

I used Divine Pigments dye on this project, you can find it at Turners Warehouse: www.turnerswarehouse.com/products/divine-pigments?ref=nvww Same with the UV resin: www.turnerswarehouse.com/products/alumi-uv-uv-resin?ref=nvww I don't have any videos specifically covering UV resin in depth. It's a handy resin to have on hand though, lots of uses! Great for ring making, glueing things down quick, and finishes. In a nutshell, it cures by UV light. So you have unlimited working time, then you just expose it to UV light (with a UV bulb or by setting it in the sun) when you want it to cure