Conformal coating is a protective coating or polymer film 25-75µm thick (50µm typical) that ‘conforms’ to the circuit board topology. Its purpose is to protect electronic circuits from harsh environments that may contain high humidity, a range of airborne contaminants and varying temperatures. By being electrically insulating, it maintains long-term surface insulation resistance (SIR) levels and thus ensures the operational integrity of the assembly. It also provides a barrier to air-borne contaminants from the operating environment, such as salt-spray, thus preventing corrosion.
Conformal coatings are a breathable protective layer that will protect against the particular environment the PCA is exposed to by filtering out the airborne contaminants and maintaining long-term surface insulation resistance but will also allow any moisture trapped in the circuit board to escape.
What are the different conformal coatings?
Conformal coatings come in a wide range of forms. From a physical standpoint, conformal coatings are commonly dispersed in organic solvents (solvent-based), dispersed in water (water-based), or supplied in high or 100% solids (silicones and most UV curables).
From a chemical standpoint, conformal coatings’ standard chemistries include acrylics, urethanes, silicones, synthetic rubbers, and UV curable acrylated urethanes. Each chemistry is associated with certain physical properties that are suited for certain conditions and end-uses. For example, silicones tend to have the highest temperature resistance while synthetic rubbers and UV curables often provide the highest level of humidity resistance.
❇️How to apply conformal coatings?
How a conformal coating is applied is dependent mainly upon:
Preferred application method:
1.Existing
2. Available
3. Equipment (Dip/Spray equipment, curing equipment etc..)
4. Board Design/Complexity/Masking Needs
5. Desired volumes/cycle times
❇️Is conformal coating the same as waterproofing?
A conformal coating provides resistance to humidity and moisture, but it is not the impermeable barrier one expects with the term waterproof. In fact, Conformal coatings are required to be somewhat permeable to allow entrapped contaminants or outgassing from electronics to escape safely and without damage.
❇️Is conformal coating conductive when wet?
A conformal coating is designed with a relatively high resistance to conduction of electricity. This dielectric performance is relatively unaffected by the presence of liquids (such as water) on the surface of the coating. However, the liquid itself will remain conductive on the surface, and prolonged exposure to standing liquids will eventually degrade the dielectric properties of a conformal coating to some degree due to absorption over time within the coating as well as chemical degradation.
❇️How long does conformal coating last?
A conformal coating’s protective properties lifespan is highly dependent on the uniformity of application, contaminants both on the electronics and in the environment, and the conditions under which the electronics will be required to perform. In all cases, product performance and service life can be expected to be substantially longer than under the same conditions with no conformal coating protection applied. Factors of 2X to 100X in extended life of product would be considered typical and expected.
To learn more about conformal coatings👉 visit www.humiseal.com
15 окт 2024
