I HAVE A 2009 VANTAGE 4.3. THANKS FOR THE VIDEO. I MUST DISMOUNT MY PANELS BECOUSE THERE IS A TERRIBLE LITTLE RATTLE NOISE COMING FROM THE INTERIOR OF THESE. GREETINGS FROM SOUTH ITALY.
Superbly useful as usual. The paint on my grab handle has a few scratches and is a job to be done. I was going to get the bodyshop to do it, but I'm good with a rattle can so it's a job now for my garage.
sorry for my question but is it possible to change out my own automatic gearbox on jackstands at home . i have purchased a zf26hp transmission and want to do the job myself on jackstand . just pull out the old transmission and replace it with the new one . my pump is not working and my aston dont shift in to gear i already have change all the solenoid and when i fill the transmission like in your video it would not take the oil . so i bought a used transmission with low miles to change it .thanks
I don't really know if you can. You have to drop the rear subframe and all the work related to that. Maybe? I've just not done it before and don't know if you'd have room to tackle it all. Best of luck. Post how it goes!
@@Aston1936 Thanks for the reply i will try to do the job myself and will post how it goes . i will do some more research how to tackle it . i know that they do it with a 2 post lift if that is the case i have no choise but to purchase a lift . i will keep u updated if it succeed . Thanks
Good point. I've not had to do that, but a senior Aston Technician told me about the dollar bill test. Lower the window a bit, place a dollar bill across the top of it, and then run the window up all the way. You should not be able to easily pull the bill out. If it pulls out easily, the fitment needs adjusted. Try several areas along the window near the front , middle and rear. Thanks for watching!
