What Temperature Develops the Tec1 12715 Peltier Module with W1209

Подписаться 89 тыс.

Просмотров 245 тыс.

50% 1

Here you can see the products which i used in this video
Module Peltier AliExpress s.click.aliexp...
Radiator and Cooling fan; AliExpress s.click.aliexp...
30g Thermal Grease AliExpress s.click.aliexp...
See my blog video:diy-tipstricks...
In this video, I'll show you what temperature we can get from peltier module
Thank you for Watching . And do not forget, Like and Subscribe
Due to factors beyond the control of DIY Tips&Tricks, it can not guarantee against unauthorized modifications of this information or improper use of this information. DIY Tips&Tricks assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. DIY Tips&Tricks recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of DIY Tips&Tricks, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not DIY Tips&Tricks.
See my facebook page / diy-tipstricks-1648900...
► Music provided by: No Copyright Songs - Best Of
► Jim Yosef - Link (No Copyright Sound Best of): • Video

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@bossagamer4556 5 лет назад

How hot does it get? And also can you submerge this in water and will it be fine?

@williamgosvener47 5 лет назад

I like this a lot. Some ideas! Theoretically this could be used as a low power high performance component for atmospheric air to water generator, or the process could be reversed for a gray water evaporator. 2 of them could be used as a low power high yield driver for a sterling engine generator.

@dedskin1 3 года назад

nothing of that sort , this is not low power , this is high power ,eats up 50W in a snack , 100W if you push it like here , that empty's a battery in 30 minute's . 15A that is a lot

@joshuaromano9407 Год назад

what are the configurations made in the w1209 temp controller? I am having trouble maintaining my desired temperature. it gets cold for a brief moment then the temperature raises back up even if I have proper heat dessipation.

@CMCdiy Год назад

Hi Search here in the description section www.aliexpress.com/item/32952298620.html

@Bloodstorm777 3 года назад

Hello. There. Just recently viewed your vid. I am just confuse. I followed your video and i just use tec 12706 since its the only one available and use same heatsink with fan though i just use an aluminum heatsink but i put some copper wire around it. After connecting it to the power supply, i waited but unlike in your video, there are no frost or it did not cool the same as yours. Can someone help me. I will be using it with my cooler. Did you put the side with numbers on the copper heatsink? And the hot side on the heatsink with fan??? Pls help. Thanks

@jivanescalante-garcia8841 6 лет назад

liked the project, hated the music. ¿What is the model of the termometer temperature control?

@multiomer1997 6 лет назад

W1209

@wearewatchingyou4371 3 года назад

Agreed, so many people use loud annoying MIDI music as a background. If it's not music they recreationally listen to themselves, why even use it.

@gabrigames02 6 лет назад

LIKE........but in late hot?? what temperature?

@SZK_PLAYA 3 года назад

In winter my peltier reaches -8.1 but in summer it only forms water on the heatsink

@electronic7979 6 лет назад

Nice

@khanniggaa 6 лет назад

Can you tell which current supply you use

@ajibjaya5661 4 года назад

How abaut temperatur in the room ? in celsius ?

@manojchoudhury3212 6 лет назад

How long hours it can run???

@fththkll4979 6 лет назад

Thanks for the video. Are you using cheap chinese peltiers or quality ones?

@TTTray13467 5 лет назад

He has it listed in the description for like 4$ but i bet I’m a little late

@Hector.Michinaux Год назад

Los mejores peltier son los chinos baratos. Funcionan mejor que los caros y son más económicos

@SZK_PLAYA 3 года назад

How much amps did you apply for the peltier?

@adrianlee2753 4 года назад

whats the heatsink you used on the cold side?

@agostonl 6 лет назад

Aha! Microsoft power supply! That's why it's frost! :)

@ahadshaikh5548 3 года назад

I'm trying to 15am peltier and use same heatsingh which you are using. But It cools down for a while and then gets very hot on side of heatsing...plz help.

@zgv111 5 лет назад

So you dropped 40 gramms (say 30gr alloy heatsink, 10gr half of peltier - silica) of substance to -20 in 3 minutes. 40gr of alloy should have specific heat similar to around 10gr of water. 10gr of water every 3 min is 200gr every hour. That gives you around 7W of cooling power. You see, the problem is - just like soldering iron, weak uses 12W of energy to heat up to over 300 deg. But you can't boil a kettle with it, can you? In a same way you can't built fridge using 7W cooling power and wasting 180W of heat. Fridges power starts 200W with around 50% efficiency. So you need 14 peltiers. 12V times 15 Amp times 14 = 1520 Watt waste heat, 100W cooling power You might have -20 deg, but as soon as you move some air around your cool heatsink... You just don't have enough power.

@umairkazmi733 5 лет назад

is it 7 watts per second???

@umairkazmi733 5 лет назад

7 joules per second

@bhusanalley7481 Год назад

You're right only good to make mini fridge

@aabdaalsh374 3 года назад

رائع جدا

@ShahidKhan-rd1wj 4 года назад

im use 10 peltier but cable wire is go very very hot burning what number wire I use to please help me answer me

@fojibagichasingh1145 5 лет назад

Bro agar thermoelectric grease na miley to aur kuch lgaa sakte hain ke nahi

@ranjitkharade1469 3 года назад

If I take TEC1-12706 peltier module and I gave to it 12volt,6amp at room temperature 35 degree Celsius then after 1hour what will be the min temperature at cold side and max temperature at hot side

@pitergrajales1337 5 лет назад

Esa peltier es a 15 voltios y 15 amperios con razón el rendimiento

@norbertrivera Год назад

Sí ,demasiado amperaje para algo tan pequeño.

@user-ox9kt8tg3h 6 лет назад

If used 10 pleteir type TEC 12715 what power supply in kv is suitable to used and what the rated current for 20 pecis

@jhonanthonyguerra7036 4 года назад

its okay if i use 3pcs of peltier tec 12715 for 12v 30A power supply

@omsingharjit 6 лет назад

And what about 12706 maximum temp Drops ?????

@eswarsaitej7074 4 года назад

Sir can u please tell me what is the power supply u used and its rating

@norbertrivera Год назад

Xbox 360 power supply 12 volts 12.1 amps output the Tec1 12715 Peltier Module is rated 15amps.

@RajatSingh-pl7hd 6 лет назад

What was surrounding temp when you used it? AND CAN IT BE USED TO COOL WATER BELOW 15DEGREE CELSIUS WHEN SURROUNDING TEMP IS 40 DEGREE CELSIUS

@fusseldieb 3 года назад

Maybe stacked peltiers?

@Ima184mm 6 лет назад

Wow This is so much good for my CPU

@jerickogallardo5472 6 лет назад

bak j lol it Creates moist and ruined your cpu

@harshalpatel9155 5 лет назад

Bhai maysonic ki copper plate kahase li he online link send karo na nd TEC modules ka model kon sa use kar ne ka to -20 tak ja sakh ta he plzz bata na

@Graeme_Lastname 4 года назад

Get colder without copper heatsink.

@avrahamstern4550 2 года назад

can you write the heat side temp? or temp of warm air from fan? everybody test the cooling but nobody measure the heat :-( thnx

@AjiNewbieGaming 5 лет назад

where did you buy the headsink device?

@mahipalsingh.dhunna.9785 4 года назад

When set box mini a.c how much area be cool 10×10 room be cool

@SmartphoneKaSmarty 5 лет назад

How much electricity UNIT consume ?

@chillyman1459 5 лет назад

the TEC12715 should consume around 120W

@payyavulanaveen6967 4 года назад

Hiii Which peltier is used for making in fridge Can pls any one help me

@halahadidi2708 5 лет назад

Dose there any size for the pileter

@Dylox04 3 года назад

I need to replace a broken peltier. It consumes 5A at 10.5V. I bought a 12V10A peltier (TEC1-12710) but it only consumes round about 3A at 10.5V. Any ideas why? The cooling power is not sufficient..

@dedskin1 3 года назад

its internal resistance is higher i guess , you can check in specs

@khalidkamal3054 6 лет назад

I am using Chinese peltier, but it is not decreasing temperature less than 29 C. Can anyone help me why isn't cooling. When I bought first peltier it was freezing in open condition but now it's performance dropped within a week, neither it consuming more than 2 amps current nor cooling to freeze either in a small covered box. It is 12706

@soroushata2146 6 лет назад

Notice that you should disipate heat from hot side, otherwise you won't get the response,maybe you don't use silicon grease between your modoule.

@logic0905 6 лет назад

I know that by using peltier element can achieve temperature up to -70 celsius. I see that in device. But i can't find such element :( If somebody know where I can buy it, please say :)

@Tech4geeks21st 6 лет назад

@@logic0905 you can buy it online on amazon,ebay,banggood by searching thermal grease

@logic0905 6 лет назад

I use termocunductive paste. That don't help decrease temperature on cheap peltier under -19-20 C.

@miang3887 5 лет назад

19906 peltier use it

@mirshahzadhassantalpur6637 6 лет назад

Nice Project Bro.. tell me if i use 12706 instead of 12715 Peltier Module. Any changes in temperature? or remain same as 12715.

@rock1223 6 лет назад

Mir Shahzad Hassan Talpur 12706 give u up to -5°C Max and 12715 is up to -20°C it take havey power 12v 6Amp.

@garywheeler7039 6 лет назад

To compare, look at the watts, that is the amount of power used. The one used 12715 can use up to about 140 watts. The 12706 only utilizes about 60 watts or less. More watts, more cooling ability, but more current draw. The 12715 has the capacity to cool twice as much generally. A more expensive unit 12726 has much more capacity, 400 watts. I actually ordered one each of the smaller ones 12706 and 12715 today for the first time (Banggood). I think the 12715 he used is a good compromise. A limitation for other people might be the capacity of a regular car cigarette lighter outlet.

@sumanasenterpricesumanaroy7338 3 года назад

@@garywheeler7039 which peltier is best.12v 15 amp if I use then power supply will be 12v and what wan amp use

@garywheeler7039 3 года назад

@@sumanasenterpricesumanaroy7338 : 15 amps is a lot to push through a little wire. In the US, that means a wire of 14 gage (1.63 mm) or larger copper wire or equal for fire safety. Otherwise the wire tends to overheat. Using larger wires always means higher efficiency of course and less wasted energy dissipated as heat. Sometimes the peltier units that have lower wattage, might be more efficient also. In a particular application. It kind of depends on the amount of heat or cool, your unit is able to transfer at a particular time. It is a little over my head not understanding the calculus of it all. The efficiency or thermal conductivity of the heat sink and so on. A possible 'bottleneck". That is, higher wattage capacity is not always better especially as they become more inefficient as the get hot and if the unit gets too hot is stops working I am told.

@nathanitypong5862 6 лет назад

does a peltier last for long

@LeMisterRai 5 лет назад

Is it possible to get a close temperature using batteries (for portability). The temperature doesnt have to reach negative, but at least single digits

@RoooH00 3 года назад

É Possível que sim, porém não duraria muito tempo devido ao consumo. Poderia usar uma bateria Lipo 3S, mas descarregaria rapidamente.

@lexiaontube 2 года назад

What was the ambient temp ?

@CMCdiy Год назад

Hi The ambient temperature is the one from which the test started 28 °C

@e-test4938 3 года назад

It's needed to add same big heatsink both sides

@ariesleo7396 Год назад

No only to the hot side

@Raju-ye2lg 4 года назад

How to know is it original or copy I was order 2 12706 both copy 😡

@mukeshkumarpanda7489 5 лет назад

How much volt use sir,

@mohdsateria6359 6 лет назад

U have used the controler just for measuring the temperature. Am I right?

@fabianlalruatfela2689 4 года назад

no answer but i think u guess right

@nicknick2824 4 года назад

For what all those dance? What is a current / voltage on the Peltier module? Now it looks like a circus manipulation,only.

@miang3887 5 лет назад

peltier ke priec kaya ha or kha sa bay kya ha

@ahmadsmusic-2114 5 лет назад

woooooooooooooooooow

@rahibaliwaggan7007 6 лет назад

Bro asli peltier ki pehchan Kia he

@thareshliyanage263 6 лет назад

Hey just wondering what heatsink and fan are you using? the link in your description does not seem to be the same heatsink

@CMCdiy 6 лет назад

The link I put in the description is for a cheaper heatsink. Here you can find the other: goo.gl/p2Afoy

@thareshliyanage263 6 лет назад

Im a little confused since the link you just posted has a heat sink with a base that is 35mmX48mm but the peltier(TEC1-12715) has dimensions of 40mmX40mm so parts of the peltier wont be in contact with the heatsink. But in your video it seems to fit fine (see at 0:22 ). Are you sure its the same heatsink?

@CMCdiy 6 лет назад

I have put an aluminum plate over the heatsink surface. If you do not have it, it has nothing, it works and you can mount the peltier module in the middle

@mobilrhelpingchannel7036 6 лет назад

Bhai kitana hot hota hai usaka bano plz

@UnitedEngineers 6 лет назад

Hi, COuld you please let us know, where did you get that heatsink+fan ? I couldn't find that specific type in Aliexpress or eBay. Much appreciate your quick response. Thanks.

@CMCdiy 6 лет назад

Hello . sorry for late answer , you can buy it from here goo.gl/ptR2wT

@dannygeorge1942 6 лет назад

The link you posted does not have the exact radiator and cooling fans. Could you please provide us with a exact link. Thank you.

@CMCdiy 6 лет назад

Here you can find: goo.gl/p2Afoy

@jmr-marc 6 лет назад

a suggestion that seems correct to me (the fan is included) www.banggood.com/fr/12V-DC-CPU-Quiet-Cooler-Heatsink-Fan-With-4pcs-6mm-Heat-Pipes-p-1076028.html?rmmds=search&cur_warehouse=CN

@e-beries4824 5 лет назад

*Free Wather?*

@shenmirai6004 5 лет назад

not working.alwyas heat no cool

@hisanglinliew9937 5 лет назад

I think one side is cool and one side is heat...

@parwindersinghwaraich2365 5 лет назад

What is consumption of electricity

@e-test4938 3 года назад

12x15 = 180 watt max.

@jhonanthonyguerra7036 4 года назад

its okay to use 12v 30A for this peltier?

@johannesg8439 4 года назад

@romeobaltunado1218 6 лет назад

What kind of peltier did you use? 12v 7amp?

@CMCdiy 6 лет назад

Hi Romeo .I use Peltier (TEC1-12715) 12v-15amp Here you can see the products which i used in this video goo.gl/H1sdFQ

@BasedBidoof 6 лет назад

it was 15 amp, you can tell by the last 2 numbers in the 127xx code

@alejandroolvera1477 6 лет назад

What’s the power supply used?

@CMCdiy 6 лет назад

Hello Alejandro. I used a 12v 12 amp transformer. You can see it here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8rwda3PtXw0.html

@directioner4life239 5 лет назад

Did u give 12V 15amps?

@CMCdiy 5 лет назад

No. from an Xbox source. 12V 12A

@directioner4life239 5 лет назад

@@CMCdiy can I use my 12V 0.18A fan with 12V 7A supply?

@CMCdiy 5 лет назад

Of course. you can use any amperage, it is important not to overtake the volts

@pruchot8504 6 лет назад

da para fazer com o chip do computador par esfriar

@johannesg8439 4 года назад

da, mas vc tem que saber, que o seu ventilador them que ser muito poderoso, pq ele tem que compensar a energia thermica do seu chip do computador e a energia do tec1. e a potencia do seu tec1 pode ser major do que a energia do seu chip.

@mobiletradecenter8197 6 лет назад

is past ka naam kya h

@nadeem_saifi4762 6 лет назад

kitne rupye ka hai indea ke

@rishabhgupta4364 6 лет назад

What if connect my pelteir to alternating current

@ImmortalShiro 6 лет назад

Rishabh Gupta good question.. But of course step it down to 12v. Idk what wil happen too.

@czarzenana5125 6 лет назад

It will not work. If you switch the positive and negative the hot and cold sides are switched as well. So if you do that 50 or 60 times a second both sides stay at room temperature.

@ImmortalShiro 6 лет назад

Czar Zenana that's my speculation too.. But will still try someday. :)

@czarzenana5125 6 лет назад

It will actually get warm on both sides because of the power that is consumed by the peltier module.

@khalidkamal3054 6 лет назад

@sicmunduscreatusest2674 2 года назад

Music again ;(((

@bacardilove1981 6 лет назад

hello there from greece!! i have a lot of petier but its the 12706, i have put them on the ZALMAN (proclockers.com/reviews/cooling/zalman-cnps5x-sz-cpu-cooler) then thermal paste the peltier and then again thermal paste and a small heatshink. i have plug them in a ups battery 12V 7Ah but the temp goes to 23c and then again to 26c and stay there. i have try also with a psu from old computer but nothing, What i have done wrong????? i see all the people with peltier to freeze the heathink but mine nothing.

@bacardilove1981 2 года назад

@@patrickimperial6003 hello again could u propose me a psu to reach the correct amps,, i have 6-7 peltier , can i connected all together? wait for your suggestion