WHAT YOU NEED TO LS SWAP AN OBS IN 15 MINUTES!!! ( 96-00 ) 

I do plan on addressing it in a future video, everything is there i just have to figure out what output to connect to on the holley and make it all pretty

@@TahoesNTurboshey btw did u ever mention it ? i am about to go ahead and swap it out

@@TahoesNTurbosand wanting a/c so please lmk what i need

@@TahoesNTurbosany updates?

In my OP. there shall be no swappery without AC. ( florida)

Personally im a work with what you got kinda guy. Where i live 4x4's are everywhere and the only 2wd trucks are square bodies so i worked with whats availible. I did convert my 4x4 to awd with a denali transfercase but can unlock the front diff at the push of a button for when i want rwd fun. As for a conversion kit, there is lots of people who went from 4x4 to 2wd, lots of info.

Thank you and yes they are identical, just different fenders and grill. I actually had plans to put your style on my Tahoe but went with the SS style.

Input shafts are different length on the 4l60e's from sbc to ls so you'll want to swap trans aswell guys claim to use there sbc 4l60e's but your playing a dangerous game as the converter won't sit in pump properly some guys claim no problems but I would risk it. Plus your caddy will be the 4l65 it's the same as a 4l60 but you will have the upgraded 5 pinion planet 😎

If the obs is 1997 came with a 4l60 oready do you still need the spacer ??

the tahoe and escalades are identical aside from some trim. these trucks are very simple to work on and thankfully parts are everywhere

when Freon goes from high pressure to low pressure it gets cold. First make sure your system has no leaks. After make sure your compressor is compressing safely. May need gauges to monitor both high and low side. If you're running orifice tube they're easy to clog otherwise check your expansion valve. With correct pre4ssures I don't see why you shouldn't have cold ac. There might be a thermo sensor on the compressor inline the clutch power wire, that could open the circuit if faulty.

Cats are the last thing you gotta worry about concerning a swap

I bet you can get the catalog for ICT Billet from their website... lol

mine came when I bought my parts, everything is listed and updated on their website

because a 95 is a TBI setup not a Vortec

Same concept but you will need to get a vortec fuel pump and some other things

@@christinogriego428 is posible if I can swap a 2005 Escalade 5.3 vortex engine?

You can buy a complete good LS based truck for that much! 😂

0 reason for him to have used a Terminator, he could have used the truck harness and ECU and it would have been just as ugly 😂

Go carberated

@@stevenboone1922on the ls engine can be cheaper carburetor?$

Yes it will

4.8,5.3, 6.0, 6.2 are all the same size lol