What You Should Absolutely Never Do When You Iron on Wood

Подписаться 677 тыс.

Просмотров 44 тыс.

50% 1

FREE 3-Days to Master Your Cricut Challenge: makersgonnalea...
If you're a Cricut beginner you may not know about Ironing on wood. It is possible and fun when you get the hang of it, but there are rules to follow. There are lots of Cricut hacks for how to successfully Iron on wood. If you've had a bad experience using HTV on wood, you may have been making some of these mistakes. We hope you enjoy learning about What You Should Absolutely Never Do When You Iron on Wood.
Get Thousands of Cut Files, Fonts, Printable Guides, and more - makersgonnalea...
Use code “RU-vid” at checkout for your special discount!
💗 Subscribe For New Videos! goo.gl/MSz2Db 💗
FREE 5 Day Master Your Cricut Challenge: www.makersgonn...
Some of the links provided are affiliate links. Makers Gonna Learn is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program. As an Amazon Associate, we earn from qualifying purchases. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
Supply Links:
Cricut Maker 3: cricut.pxf.io/qndya5
Sanding Blocks: amzn.to/35476Le
Minwax Jacobean Stain: amzn.to/2VycToT
12” Wood Rounds: amzn.to/2UnX9ag
Cricut Mini EasyPress: cricut.pxf.io/BXLnNW
Americana Decor Paint: amzn.to/3wYyHty
✅Shop Our Favorite Products: www.amazon.com...
✅ Shop 143 Vinyl: www.143vinyl.co...
✅ Shop Cricut Supplies: cricut.pxf.io/QO1YYA
✅ Order Your Cricut Maker: cricut.pxf.io/5bJ523
✅ Get Your Cricut Mini EasyPress: cricut.pxf.io/BXLnNW
✅ Masking Paper Transfer Tape: amzn.to/3bB57jJ
✅ Pump Bottle: amzn.to/2yCgsBJ
✅ Scotch ATG Gun: amzn.to/2yOvu7n
✅ Dishwasher Safe Mod Podge: amzn.to/354190H
✅ Our Favorite Weeding Tool: amzn.to/3pwnJc2
✅ Our Favorite Printable Vinyl: amzn.to/3nhkd2P
✅ Our Favorite Burnishing Tool: bit.ly/33Ejamf
✅ Pin Pen Tool: bit.ly/2SCiMlZ
✅ Starcraft Vinyl: bit.ly/3uP2GUo
✅ Siser EasyWeed: bit.ly/3hjLgLP
Contact us here: makersgonnalea...
Find Us Here:
WEBSITE: makersgonnalear...
INSTAGRAM - / makersgonnalearn
FACEBOOK - bit.ly/2N8URpb
PINTEREST: goo.gl/SxDAak
#cricut #cricutmaker #cricuthack #cricuthacks #cricuttips #cricuttutorial #cricutmade #svgfiles #svg #cutfiles #diecutting #handmade #craftproject #diytutorial #easydiy #craftideas #easycricutcraft #beginnercricut #cricuteasypress #vinyl #htv #ironon #sublimation #sublimationprinting #diymugs #designspace #cricuthowto #cricutbginner #cricutinspiration #cricutdesignspace #howtocricut #designspacebeginner #cricutsealing #howtoseal #sealingcricut

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@debbieestes9746 2 года назад

I really should have watched this before I tried ironing on wood...made numerous mistakes that I probably would not have made if I had watched this first! Thanks for all the good info!

@MakersGonnaLearn 2 года назад

You're welcome!

@valerie750 11 месяцев назад

I love your teaching style. You are so informative and I appreciate you sharing your knowledge. Thanks a bunch.

@1beakin 10 месяцев назад

Thanks again MGL, made a nice DTF sign for DIL, but put on iron on saying, I had painted it with White Chalk from FolkArt, so today I was upset when my letters would not stick. You answered the question. I had the adhered enough I am polycoating them later.

@karenhadden4980 3 года назад

To get rid of the blotchiness when staining your wood (especially plywood and select pine) put on a pre stain wood conditioner prior to staining.

@CristinaRiveraBeauty 3 года назад

Great tip, thank you!

@solodreamy 3 года назад

What do you recommend for sealing it? I make signs and bookstands but I want to be able to seal the htv design on them to where they won't be affected by anything

@carolschafer4667 3 года назад

The Dollar Tree does have sanding blocks that are pretty good :)

@kawestley1965 3 года назад

I strongly recommend a 160 grade to the sanding 220 it worth The money for a better quality sad paper. I've been working with wood cuting building sense a child lowes or home depot cand help you.

@HubbaColo 3 года назад

Sandpaper was originally graded by how many rocks (grit) would fit on a square inch-so….the smaller the pieces, the more would fit. Imagine 1500 tiny pieces, and you’ll see why higher numbers result in smoother finish.

@cats4992 2 года назад

Thank you for all your help! You give great details and will def help with my current project!!

@Shelly35able 2 года назад

I literally just did a lot of this! I cooked all of the paint on my round. I used my big heat press

@Mary-zy5ru 6 месяцев назад

I made a wood round with a 4th of July cow and I painted it with white bear house paint and it worked great. I should have let it dry a little longer but it worked great.

@sharonhill5246 3 года назад

That is my project for today. Paint wood rounds for Halloween door hangers!! You read my mind!!! 😂 Thank you for the info!!!

@MakersGonnaLearn 3 года назад

Have fun!

@lori-jocarroll 3 года назад

Totally thorough good information. Thank you Rachel.

@MakersGonnaLearn 3 года назад

You're welcome!

@angielewis28 8 месяцев назад

Very helpful!

@MakersGonnaLearn 8 месяцев назад

Glad it was helpful!!

@MLLatUtube 3 года назад

So is it better to use regular vinyl on wood projects?

@xoangelxoluvxo 3 года назад

Thanks for the wonderful tips. 🎈💕

@MakersGonnaLearn 3 года назад

Any time!

@cristinehobbs7744 Год назад

Crissy. Very helpful and great information.

@MakersGonnaLearn Год назад

So glad!

@nikkifritchie2701 Год назад

is it possible to sublimate on HTV on wood. Here is what I want to do. I have a wood round that I have stained and I want to put a sublimated design for a nursery on it. However the stain is a red oak and it is a little dark, so I wondered if I could create an off set around the design and cut the offset from HTV and sublimate the design on it so it shows up?

@jiffygizmopd8263 2 года назад

Very helpful lesson on iron on wood. Thank you.

@MakersGonnaLearn 2 года назад

Glad it was helpful!

@GDISinc Год назад

Okay the heat is 300 how long do we need to apply the heat to the wood and do we need to preheat the wood? Thanks for the video!

@LesleyChandlercrafts 2 года назад

This was a very informative tutorial. thanks so much!

@lilybecerra2035 3 года назад

Ty !

@MakersGonnaLearn 3 года назад

You're welcome!

@kandypowell6133 Год назад

thank you very helpful.

@MakersGonnaLearn Год назад

So glad it was helpful!

@Joanne-yl2sx 3 года назад

Thanks Rachel. Miss seeing you ❤️

@MakersGonnaLearn 3 года назад

You're welcome!😊

@ashleymatson6381 3 дня назад

If using a bamboo wood coaster or ceramic tile with htv do they need to be sealed first for protection against water from cup? If so should I seal before or after htv placement? Thank you!

@dorothyslade489 2 года назад

Brilliant video best video by far

@MakersGonnaLearn 2 года назад

Aww! Thanks so much!

@patriciamora2915 6 месяцев назад

I’m making a lazy Susan and I bought an already stain lazy Susan and I’m going to iron on words on it but I was wondering if I can put a clear coat of something over it that won’t make letters come off

@patriciamora2915 6 месяцев назад

Also I was wondering if you cutout words and make a stencil or you use a stencil with alphabets is there something you can use to stick stencil to wood to paint the letters on

@michelelee7977 2 года назад

Why don’t you use permanent vinyl instead? I did it on two projects and it worked well.

@carolineblanchette2860 Год назад

Stupid question… if I have black heat transfer vinyl can I put my vinyl on wood first and then stain the wood after?

@brookestruve2842 Год назад

Where is the link to the video on you actually going through the process of sublimation on wood? I thought it was mentioned that it would be linked below?

@MakersGonnaLearn Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aIJ70j5kmJE.html makersgonnalearn.com/how-to-sublimate-on-wood/

@Hija.De.Luna25 9 месяцев назад

What if I mix cotton fibers into my paint? Imma test it on dollar tree stuff!

@carolschafer4667 3 года назад

I don't see the links to the how-to do wood iron on?

@HubbaColo 3 года назад

Click the tiny down arrow right of the title of the video, this while your video is in small screen RU-vid rather than full screen.

@dorothyslade489 2 года назад

Very interesting video I’ve learnt such a lot best video I’ve watched regarding iron Ing on wood

@MakersGonnaLearn 2 года назад

Wow, thank you!

@janetmenchyk9778 9 месяцев назад

Can I iron on wood then poly coat to use vinyl? Or can I just paint then be able to use both?

@LeighAnnRuopp Год назад

Is it all Folk Art Paint that is an issue? I used the Folk Art chalk paint before trying to use HTV. I didn’t watch this first, and i failed miserably, however I was doing EVERYTHING you said not to do.

@kathrynkalafsky7030 3 года назад

Do you need to seal htv when using on projects that will be used outdoors?

@gypsypath1 Год назад

Has anyone tried latex paint (the type of paint you would use on walls and ceilings)?

@merlehendricks5486 11 месяцев назад

Do I use parchment paper?

@Joani161 2 года назад

Thank you. Please one time with the sanding and good wood is enough.

@jennlozeau Год назад

Can u use heat transfer on polyurethane

@CristinaRiveraBeauty 3 года назад

I have a mouse sander, will that work or should I go get a block sander like you have?

@LelouchxSuzakufan 3 года назад

I'm not the great at sanding. Would I be able to have it sanded at the store? I usually go to either Home Depot or Lowe's.

@kimmajor4301 2 года назад

Why use htv over using permanent vinyl??

@provisionsave.8188 2 года назад

doesn't look like the links were added (I'm on a 32" screen so the "if you're on a small screen, do this" doesn't apply). Thanks for the video

@verybusymum Год назад

What font is that on your t shirt please?

@melissadavis4744 Год назад

Can you use a regular Iron for and on the HTV TRANSFERS ?

@solodreamy 3 года назад

Can you please attach the links you said you would put below? Thank you in advance ☺️

@HubbaColo 3 года назад

When you have RU-vid in small screen, look over to the right of the title block which is underneath the video. There’s a tiny arrow. Touch or click it, and you will see the attachments to which they refer.

@solodreamy 3 года назад

@@HubbaColo oh yeah I know I thought she said she had some videos to link. I just didn't see them attached 🥺. Thank you though ☺️

@smeg8557 7 месяцев назад

HI was wondering if you can help me? I tried using HTV on a wood sign but when I removed the backing it left little yellow marks on the wood, any idea why this would happen? Thank You!!

@ashleymatson6381 3 дня назад

I had the same thing happen. I’m wondering if I didn’t let the paint dry enough even though I thought it was dry I didn’t wait but a couple hours

@smeg8557 3 дня назад

@@ashleymatson6381 I gave up on doing it. I just started using the decals. I might try it again. Maybe I didn’t let the paint dry also, I don’t think I did actually.

@ashleymatson6381 3 дня назад

@@smeg8557 I’m going to try again this week and let the paint dry over night. I was also using my large heat press and not the mini so maybe between those things it will work? I don’t know! I just want my stuff to look nice so I’ll keep trying I guess haha

@smeg8557 3 дня назад

@@ashleymatson6381 do you know what I didn’t think of that? Also, my press is a 16 x 20 so it’s really big. Lol

@ashleymatson6381 3 дня назад

@@smeg8557 so maybe that’s partly where we went wrong haha