What You Should Know About The CARMTEK RV Door Lock (RV lifestyle)

Подписаться 2,3 тыс.

Просмотров 6 тыс.

50% 1

We review the Carmtek RV Door Lock and give you our honest feedback. (you might be surprised at what we found)
🎥 IN THIS EPISODE
We review the Carmtek RV keyless entry door lock. We cover the unboxing, the installation, and most importantly, how to use and program the Carmtek RV door lock.
There are some very important things you need to consider BEFORE you purchase this lock, and we go over them in detail.
CARMTEK RV Door Lock on Amazon
www.amazon.com...
🔔🔔🔔 SUBSCRIBE NOW: www.youtube.co...
🔴 Follow us on Social Media 🔴
📖 Facebook: / riverstoridgesrv
📸 Instagram: / riverstoridgesrv
🔴 Affiliates 🔴
✅ TSD Open Roads: fuel discount program
apply.myopenro...
✅ MyRVmail: Mail service for travelers
gomyrv.com/4674
✅ Passport America: A great way to save 50% on site fees
passportameric...?rfsn=3867871
✅ Harvest Host: Free overnight camping
www.harvest-ho...
This is a Referral Partner Link and we are compensated when you purchase a membership from Harvest Hosts. At no additional cost to you.
🔴 Some of the links on this page are affiliate links. We will earn a small commission if you chose to make a purchase using our links. This commission comes at no additional cost to you but helps us keep providing the content we love to share. As a promise to you, we will only recommend products that we use and we believe can be a benefit to you.
#riverstoridgesrv #fulltimervliving #rvliving

Опубликовано:

13 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@laisprague3436 Год назад

we bought a Carmtek 10 digits rv door lock .When we shut the door there is a steady alarm in the door lock , after removing the battery it shut it off. there is no mention of a alarm in this door lock.

@RiversToRidgesRV Год назад

We have the 8 digit door lock and love it, never had any issues. The only thing I could suggest is to contact Carmtek directly to see if they know what the issue is. Really sorry I couldn't help but hopefully Carmtek can. Dan

@laisprague3436 Год назад

@@RiversToRidgesRV thank u.

@RiversToRidgesRV Год назад

@@laisprague3436 You're welcome! Good Luck!🤞

@RamblinRoadies Год назад

How did you know that the extra 1/2" or so needed to come out of the bottom, and not the top? Looks like a quality product.

@RiversToRidgesRV Год назад

Hey Frank, great question. I removed the old lock and tried to install the new lock by lining up the screw holes from the faceplate to the new lock. I could see the bottom of the lock would hit the door. After that it was as simple as using my Dremel tool to cut out about 3/16 of an inch from the door.

@mastersergeant8672 Год назад

@@RiversToRidgesRV That thar was my question exactly. I'm ordering this same lock and my door is at 3.5, so I need to cut a quarter inch. But I'll have to use my American ingenuity and U.S.M.C. Field Artillery "just make it work" experience as you did. Git 'er done!

@RiversToRidgesRV Год назад

@@mastersergeant8672 LOL!! Go Army!! Oh - sorry! - I just had to say it!😂

@0004racer Год назад

We added this type of door lock (a different brand) and love the convenience. We quickly began just using the keypad instead of the fob - one less thing to carry around. We do keep a spare fob and key in our truck.

@RiversToRidgesRV Год назад

@@0004racer We love ours too - they sure make life a whole lot easier! Happy to hear from you guys! Safe travels!😎

@rdance3 Год назад

What was the thought process in choosing the 8 digit key pad over the 10?

@RiversToRidgesRV Год назад

Hey @rdance3, Carmtek sent us the 8 digit key pad locks for review, so we didn't have the option. We love the locks they sent us and I'm sure we would be just as happy with the 10 digit lock. The 8 digit lock is less expensive. Dan

@lestermullen Год назад

If you are trying to change the code and mess up, how do you start over? 1,2,3,4 doesn't work now and the new code doesn't work.

@RiversToRidgesRV Год назад

@user-rm7yn6tq6w I just looked at the instructions again, this is straight from the manual: *Note:* If you're having problems programming your new code you may need to do a factory rest by pressing the "code reset" button (on the back of the handle) with a paper clip and keeping it pressed for 7 or 8 seconds. Then you can start the programming steps again. *Note:* Once the factory reset has been done the remote FOBs will also need to be reprogrammed. *Programming Steps* STEP 1: Keep the "8" button pressed for 3 or 4 seconds STEP 2: Type in the default code "1234" and press the "LOCK" button STEP 3: Type in your New Code and press the "LOCK" button STEP 4: Confirm the New Code and press "LOCK" button Hope this helps you Dan & Deena

@KillerSpud Год назад

Why do they keep making these door latches with the total garbage wafer locks? They can be raked open just about as fast as using the key. Won't somebody please make one that uses a standard key cylinder so I can actually make my trailer secure?

@RiversToRidgesRV Год назад

We understand what you're saying Tim. As we've always been told, if someone wants in bad enough, they're going to get in no matter what. Hopefully it's enough to keep an honest person honest. Thanks for writing in.

@st6795 4 месяца назад

No thanks , mine kept failing .

@RiversToRidgesRV 4 месяца назад

@st6795 Sorry to hear that. We've had ours for over a year now and never had an issue. We have them on both of our doors. We don't use the key fobs, we only use the keypads on the locks to enter or lock-up. Do you mind if I ask what issue you were having? Dan