When you run VP racing Nitro fuel in a mini bike

Подписаться 68 тыс.

Просмотров 13 тыс.

50% 1

When you run VP racing Nitro fuel in a mini bike
Tested the Tillotson 212 powered Doodlebug mini bike on gasoline from 0 to 30 and top speed. And then did the same test again with VP racings NITRO fuel to see if the bike would gain any performance. Used a Nibbi 24MM carburetor for the test.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: ru-vid.comfea...
Instagram - Doubledown555Black66
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Опубликовано:

11 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@user-if9ly9dg3v 10 месяцев назад

First comment your the best!

@dmann1209 10 месяцев назад

Hey B66, the expert knows his stuff. He can do mechanical work using gardening tools. He is a genius. Excellent content!

@Black66 10 месяцев назад

Yes, he is awesome ! 😃👍

@tigattac 10 месяцев назад

@@Black66How about lifting the needle and adjusting the idlejet, may that help. Keep on😊

@andrewkuhtz 10 месяцев назад

Awesome video, thanks for sharing dude! The mini bike expert in the beginning with all those miscellaneous non mini bike tools tho🤣🤣🤣

@mr03mach12 10 месяцев назад

As always folks another great video and test from the man Black66 👍🏻👍🏻👍🏻😎

@cadendelosangeles3914 10 месяцев назад

I love these kind of videos

@hellheart1993 10 месяцев назад

Wow that looks fun and I really really really want to smell it

@Spacecruizer203 10 месяцев назад

More Power 🔋 thanks to that Minibike Expert 😎smells like Magic I bet black magic ✨️

@davidholcomb9961 10 месяцев назад

Keep the videos coming while i try to find a place to ride my Rascal in Upstate New York! I have to tell you, you're videos are cool!

@rockcitymarco9186 10 месяцев назад

Hey man, you are good at what you do! Great video ✌️

@Black66 10 месяцев назад

Thanks !

@punishersoriano2895 5 дней назад

Great video, i have a similar build lightly modified. Was looking for a lil trick to get a lil more out of it with out buying more parts. This just might do it. Im hitting 48.8 mph top speed. Looking for a solid 50mph. 👍🫵🏾 you are the man!

@big420ccboiz9 10 месяцев назад

Awesome video 66black

@mr.stonerUDX714 10 месяцев назад

I run my one drag mini with 90% methional and 10% nitro all the time engine runs very cool the engine is a Highly modified briggs raptor

@Black66 10 месяцев назад

Yes, it is very common to run these engines on Methanol.

@dallasjames97 10 месяцев назад

WITHOUT TIMING YOU DON'T GAIN MUCH ADVANCE THAT BABY THEN TEST KEEP UP THE GOOD WORK!!

@charlesgraham9954 10 месяцев назад

used to play with RC cars back in early 2000s, iv put 20% nitro in a 2-stroke old weed eater from Wal-Mart. it would run like a scaled dog but overheat and freeze up, once the weed eater cooled off it would run again. lol. AGAIN thank u brotha

@minibikemadman 10 месяцев назад

awesome sauce haha I have some m1 from my briggs flat head, might get some nitro and make my own mix. Very cool!

@rodricbeauregard1053 10 месяцев назад

I forgot about better fuel, and no Ethinol!😊

@super-k1078 10 месяцев назад

You're the best

@CEOsario 10 месяцев назад

Try running Coleman camping stove fuel...you should like that as well...thanks again for sharing...

@berkleyboyz60 10 месяцев назад

It would run even better if u added more timing

@edengates66 10 месяцев назад

Sounds angry in a good way

@Julio-vd5lb 10 месяцев назад

you should a turbo and do a video on it i would love to see it

@gloriabauer2392 10 месяцев назад

Good video...say hello to your expert...what is his name again...lol

@Black66 10 месяцев назад

I think its Einstein or something ...

@big420ccboiz9 10 месяцев назад

You should do another episode with with timing and correct jetting and see how she move out!!!!

@Black66 10 месяцев назад

Yes, I'll have to do that.

@big420ccboiz9 10 месяцев назад

@@Black66 love the video cause I'm gonna try it my self to see if I'm gonna pick up 3 mph do you thing I can!!!!

@Black66 10 месяцев назад

@@big420ccboiz9 I think it could pick up more than that if you jet it right

@big420ccboiz9 10 месяцев назад

@@Black66 wow that's crazy

@lucassarchet6712 10 месяцев назад

I have a question for you Black66. I run 24mm nibbi, 22 and 28mm mikuni and I'm at 5200 ft. I tune them and they run great. Almost everyone has to have the carb intake covered and a quick pull to prime before they will start. Bigger idle jet, maybe?

@Cereal_Killr 9 месяцев назад

I been trying to tune my tilly 212 stage 2 with the 24mm nibbi too. Im running a 105 main and a 35 pilot right now and it's running very strong! Problem I have is once it heats up (about 25-30 minutes) it starts to miss. Can't decide if its lean or rich. I'm in Beaver, PA not sure of elevation here. oh yeah needle on position #4 (2nd up from pointed end)

@Crazyhorseracing461 10 месяцев назад

You might want to check the plug, even put a little cooler plug in!!!!

@jonlambshead5115 10 месяцев назад

Hi Black66 It Goes Really Good For That Size Engine. You really Need a Exhaust Pipe Bracket On That Pipe, It's Going To Break Off. The Engine Seems To Have Good Back Pressure

@Black66 10 месяцев назад

I did have a pretty nice bracket on the 7 foot exhaust. Check it out! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hK42YGn7yXY.html

@derrickjackson9156 10 месяцев назад

Stock length billet rod mod 2 cam 24mm mukini carburetor 10k rpm cast iron flywheel 22 lbs valve spring in a non hemi predator 212 ..... What to set my flywheel and valve lash too

@82sharpebronco74 3 месяца назад

What jets did you have in it prior to gas change ? Pilot and main ?

@BikeLyfeCeas 8 месяцев назад

Would a 18 tooth clutch and 40 rear be good for good top speed straight chain

@Wreaps 10 месяцев назад

Hey b66 I have a question that I can't seem to find the answer to anywhere I put in a new mongoose .272 lift Cam and changed to a 0.10 head gasket and now im having no luck getting it started I've adjusted my valves and clearances the cam and still nothing do you have any suggestions?

@johnq.chewning9360 10 месяцев назад

Where do you get your jet kits can’t seem to find a good set, thanks love the channel

@Black66 10 месяцев назад

Thanks! I get them form many different vendors like GoPowerSports and Studz racing. . I even pick them up from sellers on ebay and Amazon from time to time.

@andrewv1406 10 месяцев назад

Great job on your videos @blackk66! Can you help me out, I have the same Nibbi pe24 and when I WOT it from an idle and let go of the gas the 212 will want to cut off. What can I do to fix it? Non hemi 212 with GPS racer kit, 10t clutch & 42t sprocket. 55 slow jet and 130 main. 750ft above sea level

@j.finesseflights1403 10 месяцев назад

With vehicles the math equals out to roughly 30% more fuel.

@gudcudahudydewgarage8328 5 месяцев назад

That’s for e85 I believe for with stuff you need more than twice the fuel to make full power

@AndrewGonzalez-hz6gh 5 месяцев назад

I'm gast now waching this video I used to run a all stock tacumpsa 5 hp on about a 50 / 50 mix on rc nitro fual 20 works 30% a littil better. And tuned the stock carb that seamed to work pritty good and on a dudol bug mini bick fram. Stock geras did about 45 no governor.

@DavidTysdal Месяц назад

Try some Klotz nitro additive!

@RamiroJunTV 10 месяцев назад

Can you put a electric turbo ?? Do a video

@jamesgravel7755 4 месяца назад

Slightly more expensive. Just a couple dollars. Lol

@tobyskullbansheeo1409 Месяц назад

You must live in Nevada by my understanding of the mountain shape and where they are facing, or are you in Arizona? 😅

@brandonwebb2529 10 месяцев назад

What do you think about the Honda navis?

@Black66 10 месяцев назад

I think it's a good bike. Especially for the price.

@DeezGarage 2 месяца назад

Black, try this with a PWK 28 and big valve head, 335 or better cam, and some M5, tell me what ya think lol.

@Black66 2 месяца назад

I do have some big valve head content on the channel . We used to run Methanol back when we raced karts.

@richardlytle6741 5 месяцев назад

What are you using to clock your mini bikes

@Black66 5 месяцев назад

A Dragy performance meter

@JeffKopis 7 месяцев назад

Dave...Top Fuel dragsters have 4 stroke engines. They run on 90% nitro.

@Alwayspeeding Месяц назад

Does it hurt the engine or something

@thesmallengineman4106 10 месяцев назад

What happened to the dual spark plug video 😂

@Black66 10 месяцев назад

That would be cool!

@NitroGnome 6 месяцев назад

you can put easily more of nitro in it.... jet's only need to be insanely large... with 60% it really starts to sound like nitro engine... check my funfun videos from back years, when i was goofing with strattons and nitro :D

@freshli-lifeafter1115 10 месяцев назад

I have a legitimate question why do you mount your clutches backwards

@D--5 10 месяцев назад

people frequently mount them either way, all that matters is how well the chain lines up. It is probably technically better to have them "backwards" so that the sprocket is closer to the block and has less leverage under torque against the crank bearings. it also probably cools the clutch pack better to have them turned away from the block.

@paulskartslifan4206 10 месяцев назад

Yup … bigger jets .. swear to god just take them out and run it … if it doesn’t work perfect I’ll owe you a coke ! And on the timing you’ll want to retard it. Good video 💪✅

@Black66 10 месяцев назад

Thanks Paul! Love your stuff!

@ItsJoeBull 9 месяцев назад

For the newbies don’t ever try and run racing fuel in ur bike unless ur fully built

@jamesbuckley907 10 месяцев назад

Lol, I've ran Nitro RC cars, airplanes and Top fuel Nitro Harley Dragbikes, and when the words Nitro and what could go wrong are used in a single sentence it usually turns out that you will see all kinds of things that can go wrong . Nitro, if your doing things properly with a serious or semi serious intent on going faster can have a steep learning curve and the tuition is expensive, even at the 20% to 30% levels of Nitro most RC fuels have jetting properly through a gasoline carb gets tricky. And then there is always the possibility of trace amounts of Nitro popping off in a combustion chamber of a hot but non running engine when a kill switch gets flipped back on which then blows the head off the engine or the piston crown down to the middle of the connecting rod. Seen andvdone bothe of those. But Im just here to watch someone else entertain me so lemme grab a soda and some chips and lets start this show.

@Black66 10 месяцев назад

Yes, we used to run nitro with our methanol in our racing karts back in the 1980's . We would add a few ounces to a gallon of methanol. Fun times !

@DavidTysdal Месяц назад

Airplane fuel is 100LL. This is RC airplane car etc... fuel...

@craigjones2015 2 месяца назад

Just watch your oil % i would say 30% 9% oil lol

@Kaiser_the_maverick 10 месяцев назад

You don't follow me do you bro?

@smartassist9700 10 месяцев назад

WWAAAAAAAAIIIT……….. LOL MY FRIEND’S DAD RACED CARS ON DIRT OVAL TRACKS. THE CALLED THEM (((SUPER MODIFIED. CLASS))). I RAN THAT FUEL IN AN 8HP BRIGGS/STRATTON GOCART MOTOR. MOUNTED ON A 1 1/2 HP MINI BIKE FRAME (MADE TO FIT). LOL OIL CHANGE EVERY RUN. IT BLEW OFF COBUREATOR FROM ENGINE. WE HAD TO TIGHTEN BOLTS WHEN IT BACK FIRED OUT A 12 INCH STRAIGHT PIPE EXHAUST…..BLUE FLAMES. IT FRIED OIL AND LOCKED UP ENGINE EVENTUALLY! YOU NEED THAT FUEL IN YOUR MOTOR! I WOULD USE SPECIAL. HIGH PERFORMANCE OIL! THEN CHANGE IT AFTER EACH SINGLE RUN!

@Black66 10 месяцев назад

We used to run Karts back in the 80's on Methanol and nitro. Check out the playlist on the channel for more minibike and kart combos! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hK42YGn7yXY.html