Where should you install your AIO liquid cooler? The best places tested!

Подписаться 126 тыс.

Просмотров 269 тыс.

50% 1

Here I'm talking about where you should put your all-in-one CPU cooler's radiator. What's the best placement for it and why does it matter? There are some mistakes you can make when installing your cooler and these errors should be avoided if you want to maximise performance while also minimising risk. So in this video I'm talking about where you should put your radiator but also where not to put it.
I'm also running tests using the NZXT Kraken Elite 280mm all-in-one CPU cooler and the NZXT H7 Flow RGB case. In this video I've set it up in three different ways:
1 - Front mounted with push pull fans (four fans total)
2 - Front mounted with just the NZXT Core fans pulling air
3 - Top mounted with the fans set to exhaust
I wanted to see what the difference was between these settings by running tests. So I used Cinebench R23, Heaven Benchmark and 3D Mark stress tests and benchmarks to put the system under pressure, then I got the temps using HWMonitor.
Now obviously this needs to be taken with a pinch of salt because every system is different, your environment is different and your case and fans will be different too. But I've tested a lot of different all-in-one CPU coolers and have found that top mounting or side mounting is generally best. That said it will depend on the case and the airflow, so it's best to test and see what works for you.
Related videos:
Common Mistakes You Might be Making with Your PC Fan Setup • Common Fan Layout Mist...
AIO Coolers and Fan Compatibility • How to use different f...
Push Pull mistakes to avoid with all in one coolers • Push Pull mistakes to ...
Avoid these problems with your all in one CPU cooler • Avoid These Common All...
Specs of this build:
Case - NZXT H7 Flow RGB • NZXT H7 Flow RGB build...
Motherboard - Gigabyte Aorus Z790 Elite AX • Gigabyte Z790 Elite AX...
CPU - Intel Core i5-13600K
RAM - Crucial Pro 32GB Kit (2x16GB) DDR5-5600
NVMe SSD - Corsair MP600 GS ( • How to install and set... )
PSU - Corsair RM1000e PSU ( • Corsair RM1000e PSU un... )
GPU - Gigabyte RTX 4070 TI 12G OC • Gigabyte RTX 4070 Ti 1...
Fans - NZXT Core RGB ( • How to connect NZXT F1... )
AIO cooler - NZXT Kraken Elite 280mm • NZXT Kraken 280 Elite ...
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. Unless otherwise stated, the videos are not sponsored financially.
See deals on the NZXT Kraken Elite
Amazon US - amzn.to/3r09Hoh
NewEgg - newegg.io/ncd1...
Best Buy - bestbuy.7tiv.n...
Amazon UK - amzn.to/3Jz8pau
Amazon FR - amzn.to/441XM8f
Amazon IT - amzn.to/44iRKzQ
Amazon DE - amzn.to/3r6UCRZ
Amazon CA - amzn.to/440CPu6
Corsair USB hub - go.corsair.com...
🏆Big thanks to my super awesome RU-vid members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Aaron Yarden, Space Cannons, Riggs79, Mike S, Jay Shank 007, Jason Morgan, Starastin, Charles Latrom, McFarty, Chief Hao, Kraken Tortoise, Chris Thompson and Megan Schafer.
Want to send me things for videos or other reasons? Use this address:
The Provoked Prawn
PO Box 13277
MANNINGTREE
CO11 9BE
United Kingdom
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
Read this far? You're awesome. Smash those sub and like buttons!
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - theprovokedpra...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com...
📸 Recorded with amzn.to/3kYrhGP

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 222

@TheProvokedPrawn Год назад

Related videos: Common Mistakes You Might be Making with Your PC Fan Setup ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uPIMv30Vs3w.html AIO Coolers and Fan Compatibility ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Mm85qMEYlDI.html Push Pull mistakes to avoid with all in one coolers ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_gA71wF9Ewc.html Avoid these problems with your all in one CPU cooler ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nVkN8diBIAE.html Specs of this build: Case - NZXT H7 Flow RGB ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hiLd5wTPuMI.html Motherboard - Gigabyte Aorus Z790 Elite AX ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8WK7VmuxFxo.html CPU - Intel Core i5-13600K RAM - Crucial Pro 32GB Kit (2x16GB) DDR5-5600 NVMe SSD - Corsair MP600 GS (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8DTAiS5pPPs.html) PSU - Corsair RM1000e PSU (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FUnfuF6nSVw.html) GPU - Gigabyte RTX 4070 TI 12G OC ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_-bu6qDqeWA.html Fans - NZXT Core RGB (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mPRrPGjV_jo.html) AIO cooler - NZXT Kraken Elite 280mm ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-G5r3SG3ACwE.html

@mixmastermike2128 11 месяцев назад

1 - Front mounted with push pull fans (four fans total) C: 78 G: 65 M: 90 H: 77.9 2 - Front mounted with just the NZXT Core fans pulling air C: 82 G: 66 M: 90 H: 77.4 3 - Top mounted with the fans set to exhaust C: 88 G: 66 M: 90 H: 77.8

@mixmastermike2128 11 месяцев назад

@@JoJ0estar ya man and an end card with this exact information would be nice considering its the only thing this video is about

@hl236 6 месяцев назад

Thanks For these numbers

@henry3397 5 месяцев назад

Thanks for this. I had no clue what he meant by “push pull” vs “standard”. Didn’t realize the first option employed four fans

@Enjoyyourpussy Месяц назад

FALSE! LIAR! BAN!

@MichalMonday 9 месяцев назад

It would be interesting to see GPU benchmark being done for each of these setups. It makes sense that with the 1st and 2nd setup where CPU radiator got fresh air (as intake) the CPU temp was lower. The question is how would it affect the GPU when it's under heavy load. Ultimately it would be nice to see a CPU+GPU based benchmark which would be close to real life scenario (e.g. gaming).

@MichalMonday 9 месяцев назад

It makes sense that with the 1st and 2nd setup where CPU radiator got fresh air (as intake) the CPU temp was lower. The question is how would it affect the GPU when it's under heavy load.

@stonecold91 9 месяцев назад

GPU is going to be a few degrees more hot when you have the radiator pulling air from outside the case but only in extreme scenarios like running a cpu stress test and gpu stress test. In normal gaming use the cpu is never going to reach high enough temps to affect the gpu. On the other hand when you have the radiator as exhaust (e.g. top mount) the cpu temps are going to always be higher, even during gaming because the gpu usually is getting hot. It all comes down to aesthetics. I prefer top mounted radiators just because my pc looks better this way. Hope this helps.

@XRAYHealthrix 8 дней назад

i replaced my top mount exhaust to side mount intake (pull) and it does make difference. Thanks for confirming my idea of side mount/front mount intake makes it more cooler for cpu yet does not increase motherboard and southbridge temps

@TheProvokedPrawn 8 дней назад

👍

@alpha13sierra Год назад

AIO front or side mounted and top exhaust will give the best results. Top mounted AIO will work with all the heat put out by the GPU, hence your results.

@iloveucupid Год назад

Thank you so much

@triplocore 10 месяцев назад

It's what I was thinking too, but if we do front mounted, the GPU wont take the heat from the AIO?

@WaZarooo 7 месяцев назад

@@triplocorethis is exactly what i wanted to know , it confuses me , isnt the radiator front mounted blowing hot air inside the case ? I want to change my 120 mm cput cooler that i have on the back exhausting by a 360 mm front mount , but im scared to have issues doing that as i cant mount a 360 on the top having a smaller case

@triplocore 7 месяцев назад

@@WaZarooo Honestly, I chose to use my AIO as an exhaust fan. My logic was that my CPU already has better refrigeration (AIO), while my GPU only has the standard cooling system. So, the GPU would suffer much more from the hot air than the CPU.

@WaZarooo 7 месяцев назад

@@triplocore this what came to my head aswell , the gpu would suffer more then the cpu while the cpu already has a triple fan radiator colling

@katzicael Год назад

If I had a dollar for every time I've had to educated someone who didn't comprehend and/or understand What they'd watched in the GN video, and spouted 3rd hand misinformation all over reddit (for example) I'd be able to buy a watercooled 4090.

@TheProvokedPrawn Год назад

Yarp

@PrestigePapi Год назад

I have a 4090 water cooling system is on the list to do next !

@UseWallow Год назад

Literally can’t educate someone on Reddit they think they know best despite there being common sense and proof and instructions on how to mount one.

@UseWallow Год назад

It’s the most painful and frustrating thing.

@gren1977 9 месяцев назад

The question was: why wasn't I subscribed? You've guided me through my rebuild and now re-placement, and Lian-li fan config too! Keep up the great work!

@TheProvokedPrawn 9 месяцев назад

Thanks for subscribing eventually 😂👍🏼🦐

@recordlabeldao7820 2 месяца назад

@@TheProvokedPrawn weird because I mounted a bottom fan on my h7 elite

@balajig1261 Год назад

A simple graph comparing different setup would have higher reach for your video

@TheProvokedPrawn Год назад

Assuming I'd know how to do "simple" graphs in video assets

@jaded265 Год назад

I've watched a ton of videos about the ideal mounting spots for the AIO and found that the top mounting method was the best one so far. I tried side mounting my AIO but it didn't really make much of a difference temp wise. I debated on doing a push/pull combo but looking around it doesn't really benefit much temp wise for an AIO. Thanks for the informative video either way!

@norkris8729 Год назад

never seen any vid prove top is the best... all say front is best

@jaded265 Год назад

@@norkris8729 "Radiator mounted at the front with the tube side at the bottom One good mounting position is to mount the radiator of the cooler at the frontal area of the case interior. The side of the radiator where the tubes connect should be at the bottom, and the pump should be mounted in a position where it is slightly lower than the top of the radiator, where air is captured. Radiator mounted on top of the case with tubes down One good mounting position is to place the radiator at the top of the case with the tubes pointing downwards. This ensures the pump is below the radiator and that air will sit at the top of the loop and not be sucked into the tubes." Almost every video is taken verbatim above......so you can literally do either or........

@daritter Год назад

@@jaded265 radiator at the top of the case with the tubes pointing downwards? As opposed to what?

@nicolasm7293 Год назад

@@norkris8729ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DKwA7ygTJn0.htmlsi=ixB5bv_FyENDqlOE

@LordAngelus 11 месяцев назад

because there is no "best". With radiator on top, you will have better GPU temps, but worse CPU temps. Radiator in front, it's the other way around. Personally I mounted my Arctic Liquid freezer II (280mm version) in the front and it's all good.@@norkris8729

@soviut303 Год назад

I'd love to see a video on cable tidying tips. I'm about to try out some 90 degree USB 3 and USB 3.2 headers so the front panel cables go parallels to the motherboard but I'm wondering if there's any downsides (signal issues, reduced power, etc.). Likewise, I'm curious if there any any 90 degree or C shaped connectors for 600w GPU cables since bending them or hitting the glass can be hard on the plug.

@GooberStomper Месяц назад

A Good time to mount AIO radiator on the Bottom would be for some companies like MSI, they make a lotta Pump in radiator AIOs now had a 360 MSI AIO TOP mounted & right out of the box a Ryzen 7 3800X would suddenly goto 70c idle, seemed to keep grabbing air / swapped in a cheap 360 with pump at CPU an am 34c idle now

@sephirotic87 Год назад

Did you normalize/fix fan speeds? More likely the top mounted build had the 3090 fan running slower. It is also interesting to measure VRM temperatures and inside case air temperature, which are likely better in the top mounted build.

@fallenlegion1828 Год назад

I have an air cooler 4090. Having my aio top mounted to exhaust is ridiculous lol. Makes my water temps and cpu temps much higher. I just put my 360mm aio to the side for intake and things work out much better. I have the the lian li 011 xl for reference and a 13900k

@MartyAckerman310 10 месяцев назад

Great video, nice discussion. Personally, I'm mounting my new build with the rad on top so I'll be ok. But I also think criticism of front mount/hoses down is overblown. Wouldn't an easy precautionary step be to flip the case on its side once a month or so and let the pump run for a while? This would tend to force bubbles out of the pump head/water block and into the rad. Then when the case is rotated to its normal position, the bubbles would move to the top of the rad.

@Cube930 8 месяцев назад

Bubbles move to top so if highest point is the top of your rad youre good.

@teddym2808 7 месяцев назад

I am building a 14700K/4080s system with a beQuiet Shadow 800fx case. I am going to be using the Arctic Freezer 420 RGB. My idea was to move the front 3 factory installed 140mm fans in the case which are set as intake, and relocate them to the top as exhaust (the case natively supports 3x140mm fans at the top, just not included), and then put the radiator of the AIO in place of them as the front intake. There is also a spot for a 140mm fan on the bottom, so I will buy an extra light wings fan to put there as intake. So it will be bottom intake, front intake with 420 radiator, and rear and top exhaust. This is where I am stuck. Should I even be removing the front fans included with the case? The radiator does fit behind them just fine - the fans are pre installed as 3 intake fans at the front as said, I could add the radiator behind them as an intake also.. Would this work? Or is it better to move them as I suggested above? If I leabe them there I'll need to buy 3 extra fans for the top anyway for exhaust. all the tests I have seen favour front mount radiator intake to top mount exhaust when it comes to cpu temps and when using an open air GPU, just don't know whether to leave the front case fans where they are or have the radiator fans as the sole air intake mechanism.. TIA!

@runebdrim6733 Год назад

i think water custom loops benefit more from intake radiators and air cooled one from exhaust radiators. i think one front larger rad for gpu and another one on top for cpu, and if you case allows it you can put some fans on the bottom bringing more air.

@mikesunboxing Год назад

Having a great life as directed

@TheProvokedPrawn Год назад

Excellent!

@EricTheBroBean 4 месяца назад

It's important to note that if you live in space, you can fit the AIO at the bottom due to no gravity.

@TheProvokedPrawn 4 месяца назад

😂

@MrVoayer Год назад

AIO and Fan placement is a hot topic guaranteed to produce some debate. This video shows some options and gives valid reasons for Do's and Dont's ! There is a video titled "Lian Li O11D Evo - Fan Placement" by Kleo Yan that I find very instructive too !

@TheProvokedPrawn Год назад

Hot topic. I see what you did there.

@spikenn616 9 месяцев назад

Bottom mount seems like a bad idea because hot air rises. Top or side mount seems like the best option. Moving the warm/hot air away from the case is the goal.

@RmX. 6 месяцев назад

Not only it will blow hot air into GPU but also air bubbles going into the pomp, destroying pomp overtime.

@kyledelsan7024 Месяц назад

what are you talking about? yes hot air rises so putting fans on the bottom pulls cold air from the bottom of your room. the reasons why you shouldn't do this is because dust falls and there's obviously more dust density, which could build up at fins/heatsinks/exhaust vanes. It's also terrible for AIO coolers because it introduces more air in the pump as coolant settles at the bottom.

@davidcole2337 11 месяцев назад

I did Top Mounted and getting very low temps.. Looks Cleaner as well.

@MO-ss7qt 3 месяца назад

Finally a video that discusses fan direction relating to mounting location. I have glass on two sides of the case. The location that's makes the most sense for my build is side mounting near the front of the case. But I wanted to be sure I was ok flipping the fans around since they need to be intake in that location. Really appreciate your look at fan orientation relative to the radiator. Everyone seems to be exhausting hot PC air through the radiator. It just didn't sit well with me.

@jakeleo4518 2 месяца назад

The most BASIC rule of thumb, like the 1+1 = 2 logic used in math equivalence in AIO mount is that "AIR BUBBLEs OR AIR IN GENERAL WHEN IN A SEALED SYSTEM LIKES TO BE AT TOP" to test this get a bottle of water with some air in it, now notice how NO MATTER WHICH orientation you flipped, turned, twisted it as long as the cap is closed on the bottle the air in at the TOP. When you have it standing the airs staying by the cap of the bottle when you have it laying flat the air spread out through out the bottle but still AT THE TOP. Now use that logic we just tested to when you mount your AIO main goal here is to get the air as above and far away from the CPU as possible. So we are try to orient the radiator at the top or at least in a way the water is as far as possible from the cpu. Think of the whole system close your eyes and imagine it as a water bottle with some air. The bottle cap as your pump and the body of the water bottle as your radiator and pipes. Now think up a orientation to get the air as far, up and away from the cap of your imaginary bottle. Literally if you ever played with a bottle of water as a kid and watched the air bubbles inside swish around as you moved, shaked and jerked it around this explanation should click.

@mawinand Год назад

If I don't care about aesthetics should I have my tubes down? I plan on having a setup similar to yours except the bottom fans, just radiator as intake on the side, exausts at the top and back of the case. Also should I have fans on both sides of the radiator? My case looks similar to a lian li o11.

@letherraymundo3447 Год назад

so basically if you have the chance to put your AIO side mounted is your best option?

@alias5152 Год назад

Having Cooler Master HAF 700 with plenty of air and ... space because it's huge case my 360mm arctic AIO rad is on top, no problems at all.. No matter what i do on my pc it's cool.. Just get good pc case with good airflow and no problems...I like more performance than to be "cute", for me cute is when i see lower temps on my screen, not a box with colors.. ^^ Personal preference i guess..

@FrancoAlcudia 4 месяца назад

I did install the radiator on my PC in the front with the tubes at the bottom, just as you showed, with just 2 fans pulling air, but I was thinking about adding 2 more fans pushing air to make it a little more efficient, but, it's going to start the rainy season where I live so I don't think it's going to be necessary.

@jonnyflash5110 2 месяца назад

Phenomenal explanation. I consider myself a novice even with years of experience. So much you can learn from others. But there's even fewer who articulate it well. Great work!

@TheProvokedPrawn 2 месяца назад

Very kind, thank you

@Aykalia Год назад

but what about mounting it intake on the back??? MMMMMMHM?

@TheProvokedPrawn Год назад

Ha. 120mm? 😂

@gurpindersinghmuttar 6 месяцев назад

Hello Sir we can side mount the radiator at the right in H9 elite is it recommended bu default, as the top is covered by glass without any issue

@ph11p3540 Год назад

Now if only these AIO coolers didn't suffer from galvanic corrosion in the pump head. These things are ridiculously expensive considering they only last a little more than 2 years. I['m switching back to air cooling until these AIOs come out with 5 year warranties for the same price. Reliability trumps' performance.

@PhilQc109 10 месяцев назад

Arctic liquid freezer 2 420 comes with a 6 year warranty

@TheSwayzeTrain Год назад

LOL when I saw this video in my subscription feed, I knew it was in response to the comments in the previous video.

@TheProvokedPrawn Год назад

I get sick of those comments but also I know people will want to know this so I thought I'd test while i was also doing other things.

@hamzahfazal7203 Год назад

Would you be able to a video for the best ait low system in a H9 flow? Appreciate the time you put into your videos!

@Cheapiebeepie 8 месяцев назад

Was there a need to put the dust filter on top with the top mounted exhaust setup? Maybe the top mounted setup would have run a little cooler with less impediment?

@CrazyhorseDK 4 месяца назад

front or top or back if possible depending on case

@iamFreddyP_ 8 месяцев назад

I knew that the top would be hotter.. i mean hot air rises, so it's going to go right up to the rad. I've always set mine on the front or side.. brings in cool air all the time.

@kingvampire666 2 месяца назад

You can top mount a rad and the temp is still going to be fine you would think hot air rises but it all depends on the computer case and what kind of air pressure you have

@woro. 2 месяца назад

so push pull is undoubtably the best right? well. at least in your scenario it outstandingly is

@TheProvokedPrawn 2 месяца назад

It depends on the case but yes it makes a difference in my testing and experience

@josehernandez4869 7 месяцев назад

I just recently bought a Nzxt Kraken elite 280. I top mounted the rad. My question is, should the aio pump tubes be facing 3 o'clock. Or is it fine having them facing 6 o'clock

@danmar007 Год назад

Your title sent a nasty thought rushing into my tiny, overheated brain. 😂

@TheProvokedPrawn Год назад

🤔🤫

@danmar007 Год назад

@@TheProvokedPrawn 😄

@haies09 6 месяцев назад

I don’t see anyone having a top mount as an exhaust but with the fans pulling air, could this be cause it’s not a good configuration? I can see the benefit of it being easier to clean dirt/dust buildup.

@Nightdare 11 месяцев назад

Now, nobody mentions the best location for a cooler: *Outside of the case*

@TheProvokedPrawn 11 месяцев назад

😂

@hogarthheathan 3 месяца назад

That last PC case, where was the power supply?

@clokz11 Месяц назад

Hey man. I’m going to build my pc outside of the case, obviously to check the parts work, so I’m getting a kraken 360 rgb so do I build it outside of the case? If so what are the mandatory cables to plug into and where. Like do I just plug cpu fan and sata power just so it cools my cpu while I check everything?

@TheProvokedPrawn Месяц назад

Here's a guide on the smaller version of that cooler ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Yg031U2dE6o.html

@HerrinSchadenfreude 28 дней назад

I just got through dealing with this as I upgraded to AM5 and went from a 240mm AIO to a 360mm Ryujinn III. I have a heavy glass-sided Digital Storm Velox with three intake front 140mm fans, 2 exhaust 140mm top mounted fans a MB-side intake 140mm fan and a rear mounted 140mm exhaust fan. I have my AIO radiator mounted hose side up in front because the hoses can't clear the SATA cage flipped the other way. I tried today to top mount it after pulling the two exhaust fans, but it's too big, I'd have to drill more holes, and the hoses would never clear my 342mm long RTX4080 OC. So I returned the radiator to the front, flipped the three 140mm fans on it around so they're exhaust, and put the top fans back in and flipped them so they're intake. Before I did this, I was idling somewhere around 44C-50C after having been a little lower previously, with opening a bunch of tabs, starting a game, or simply booting running the Tctl/Tdie up to 84.2C when I've got thermal throttling in BIOS set to 85C. Now I am idling around 35C-38C, averaging between 42C-53C, and my max so far has been 75.1C. I guess I still have the goods. This is with a Ryzen 7 7800X3D where the comfortable limit is something like 88C and absolute max is 95C.

@andrewjones198 Месяц назад

The only place I could fit my 360 AIO was in the front of the case. I set the fans to intake air. 3 exhaust fans. Temps were 78 degrees peak on the GPU mem, core was a little toasty peaking at 76 degrees (3080) Not ideal to have heated air coming in the front off the cpu radiator, but a RYZEN 9 5900X doesn't produce all that much heat (peaked at 64 deg). I think the build will be fine.

@idklol304 8 месяцев назад

One thing I have been wondering is that if you only have a aio as your intake will air still flow into your system?

@fpshooterful 11 месяцев назад

I have my Corsair H155i 280mm AIO vertically mounted, in my TT view 71 case. I found it to have the best results. Since my AIO is intaking fresh air from my front 120mm x3 fans. I have a 13600k, OC to 5.5ghz on all Pcores, and i don't go above 58c for gaming.

@quantino Год назад

Is it true that top mounted radiator will run cpu warmer rather than on the side for example on lian li o11 dynamic evo?

@haies09 6 месяцев назад

I believe so, as the GPU heat will cause the CPU to get warm. So it depends on what you want, cooler CPU? Front or side mount as intake for the AIO

@activate-motivation 11 месяцев назад

Thats like so perfectionist.... Its like complaining about iphone nodge head .... Ur pc will broke in number of other way but it dont have to be cooling related

@Synt4xTerr0r 22 дня назад

Did you use fixed RPM's for all of the fans?

@thereallollifeoflegacy7524 5 месяцев назад

Old video but, i was just reading some. Oddly, Corsair themselves on their own "How to Mount a Radiator" say to either do top mount OR Radiator front with Tubes at the bottom and only as a last resort have tubes at the top. I dont know when they changed their literature, but i remember it being different recommendations. Its always been that front Rad is warmer GPU temps, slighfly cooler CPU & Top Rad is cooler GPU, slighfly warmer CPU, in general.

@HarryAyA Год назад

I was under the impression that exhausting through the rad wasn't particularly favourable. Until, I read a reddit post that detailed the benefits and drawbacks. Supposedly, your cpu will be hotter but your gpu should be slightly cooler and vice versa depending on if you exhaust or intake through the rad. Not sure how true this is but the guy explained it in a way that sounded logical.

@RodrigoR9 Год назад

Yeah that’s how it works

@oldschool_bamagatrader9960 Год назад

correct .. u need to prior one of two >> cpu or gpu .. all cases are designed in aesthetic pattern neglecting the engineer CFM functionality .. i would love to get sponsered by any factory and will design one that outcome the best out of what is been sold out in market nowadays ... this what happen when u ask a marketing guy to design an engineer product.

@billleavy5167 Год назад

Nobody's stopping you. Design it, put your ideas out there. @@oldschool_bamagatrader9960

@albertoluque.workout 3 месяца назад

Actually I changed my AIO into the front with a push & pull and it optimized my CPU temps a lot. Needed to know that I use my pc for work and CPU rendering

@Khannah69 2 месяца назад

9:20 did you use any anit sag holder for this GPU or it's that good by default? I think Lian O11 comes with one you can mount "under" motherboard.

@rohitp5023 Месяц назад

I have the same top mounted exhaust setup that you have with an I7-14700 K and a 4080, after I switched off my rear exhaust fan, there has been significant improvement in cooling with lesser noise. Also, I am having less dust in the case that was happening due to the negative pressure caused by the rear fan.

@n1v3kTV 15 дней назад

lol subscribed in less that 5 seconds just for the voice xD thanks for the info and short too, not like other channels that are +20min video long

@TheProvokedPrawn 15 дней назад

Thanks for the sub! Other people hate my voice

@paper_towelTFT 8 месяцев назад

I have a question. What about AIOs like the Fractal Lumen with the pump integrated into the radiator? would it still be okay to top mount? they do it in all their advertisements but it wouldn't be the first company to advertise improper mounting of their product ever...

@antonybee 5 месяцев назад

I am planing to buy an Arctic Liquid Freezer III 280 but there is not enough space on the top of the case, I am wondering if front mounting would work...?

@1155media Год назад

I'm currently building up a new system right now (looking at 7950X3D and RTX4070) and this + the Lian Li Uni v2 videos, as well as a few more of your videos, have helped me understand a lot more. The last time i built a computer was around the time that the Ryzen 2000 series and RX580 were brand new, so i have a lot to learn!

@TheProvokedPrawn Год назад

Glad to help!

@harley.-. Год назад

unless your doing video editor and production i would bump down the cpu to something like a r7 5700x

@harley.-. Год назад

im a bit late but yeah

@oldschool_bamagatrader9960 Год назад

that cpu go along with RTX4090 or RX7900xtx only .. u should get i5 Intel or R7 AMD .. personally i use R9 7900x3d+RX7900xtx and i have bottleneck like5% only ( less than6% is fine for multitasking like 3D rendering editting etc )

@misery55 3 месяца назад

@@oldschool_bamagatrader99607900x3d doesnt bottleneck 7900xtx. did u use a bottleneck calculator or this is info from ur system?

@SlycoopBeats 4 месяца назад

Can anyone help me find a “140mm Radiator AIO” ??? I have a Nzxt H1 mini and all it can take is 140mm but I can’t find them anywhere. They’re all sold out. I’d really appreciate it!

@purppie7574 5 месяцев назад

Hi i have a problem the psu to motherboard cable is in the way of the AIO how do i fix?

@jim-q1m 8 месяцев назад

i mounted my aio in my phantec case on top with the 2 fans running a i9 14900k keeping cpu cool enough,, i dont like mounting in front because of the hoses ,, instaling like new video card or other items

@aReT4RTedduck Месяц назад

One noob question, where is your power supply in the last setup?

@guilladogui8259 4 месяца назад

Hey so I have a 360mm aio I’m trying to find the best way to set it . Should if I mount it at the top should I push air out and have the front fans pulling air in . Or the opposite have the top fans pulling air in and the front ones pushing air out ?

@AbhishekG2000 6 месяцев назад

I always placed my 240 aio on top like 6:00 but this time i placed the fans on the top of rad in pull config and i noticed 4 degrees lower temps on full load. Interesting.

@beatskool101 3 месяца назад

My Case is too small for a big AIO, so I was thinking of cutting a hole in the top so I could put it outside on the top, 3d print a standoff.

@JakeBelleren 3 месяца назад

Last time In learned about pump is it os supposed to bring liquid to a higher level. So i don’t see a reason to put the fans under

@VirtualTape 10 месяцев назад

Thank you, your videos are always so informative and this was no exception. I usually go with front mounted push/pull because it just felt right to me, but as you said its not always possible and it really depends on your build/case.

@TheProvokedPrawn 10 месяцев назад

Appreciate you.

@LvfeStyleBrazy 5 месяцев назад

I got a question should I get the same liquid cooler brand as my other fans

@V0LK4N 10 месяцев назад

Where i have to plug in water cooler i have 280mm arctic aio_fan or cpu_fan

@Stuwi Год назад

3:08 What fan model is that? The octagonal?

@rafa90fps 4 месяца назад

Front mount tubes down here. Mt only doubt was pump tubes left or right (mine is left)

@notanfningain Год назад

Which case is this? I cannot mount my icue H115i into my Corsair Obsidian 650d or the Corsair 400d which Ebuyer told me would easily fit. I'm thiking now I'm gonna have to do some radical mount; missing my MSFS2020, and the warranty clock is ticking on all the new parts.

@periklisliakakis9046 6 месяцев назад

Hello! first of all congratulations for this video! I have installed my water cooling in the front and i want to use push pulling. I have three more casefuns on top of my tower and one casefun behind. can you please tell me which direction the watercooling fans should face? the front fans of the radiator must give air in the radiotor and the rear fans must extract the air from the radiator into the box; and the rear fan to blow the air out again? finally, should the fans on the top be pushing air down to cool the case or up to blow hot air out? thank you.

@NonLegitNation2 10 месяцев назад

I have a Lian Li 011 Air Mini and just purchased a 280 AIO that I'm planning on top mounting. The only problem is I am getting mixed opinions on whether I can top mount a 280 AIO with an ATX mobo in this case. I've never mounted a rad anywhere but on top so i'm trying to do as much research as possible incase I have to mount it in the front. I guess I'll find out in a few hours when I go pick up the AIO.

@TheProvokedPrawn 10 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sVEXd-Wp8FY.html And ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_qJp8EOA9Uk.html

@TheJobieadobe 7 месяцев назад

Wouldn't the best configuration be having the tubes come out of the top of the block and the rad on top?

@ashbjorn 11 месяцев назад

How much of this directly translates to having an AIR CPU cooler and an AIO GPU cooler? I am using the Fractal North Mesh case and have had a serious 2 day struggle with getting my system cooled, having to revert the airflow to make it all fit and I am still seriously bothered that my current setup is going to be the downfall of the expense I made (previous system was from 2014).

@FrigidARC Год назад

"I've tried out a variety of different positions"

@TheProvokedPrawn Год назад

;)

@FrigidARC Год назад

@@TheProvokedPrawn Btw thanks lol all of your videos are super helpfu, Im tryna make a pc with the H7 Flow and you have a lot of nice videos on it

@vladcristian77 Год назад

At @2:23, the AIO is 280mm? Did you had enough space to mount 3 x 140mm in front of the H7 Flow case? Do you reckon in this setup, 2x140mm top exhaust fans will work? I can see you have 3x120mm. I want to buy this case for this combo: Arctic Freezer II 280, push pull front mount, tubes down. 1 more Arctic F14 in front, blowing air under the shroud 1 exhaust 140mm in the back 2 exhaust 140mm on top

@GungHoSourdough 9 месяцев назад

I have the fractal design north case with a 7900XTX and so I had to take the front grate with the wood off and mount my radiator and fans to the front on the outside haha

@LaGoldi777 10 месяцев назад

Hello, I don't know if the previous message came out, I have questions...I wanted to know if this master cooler works for any Ryzen processor and does it not need thermal paste to control the temperature? or does it just set and that's it? Excuse my ignorance but I would like to know.

@drood610 29 дней назад

Brilliant explanation. Had so many questions about aio orientation and push pull. Watched many vids and just confusing. All the answers were right in this vid. Thx mate. Subscribed 🎉

@TheProvokedPrawn 29 дней назад

Glad it was helpful!

@l1nkcs 6 месяцев назад

Great insight! If I may could I ask for some advice as I'm thinking of building a pc with an AiO in a mATX case and I want it to be as quiet as possible. Therefore I was thinking that a front mount would be better to avoid having any fans on the top as those disproportionally increase noise (don't they?) but this might be a little toasty and in turn increase the fan speed to keep the temps (in general I care more about noise than temps though). Or should I just do a top mount with standard front intake instead (so more fans in total)? Which config do you reckon has a lower noise level while browsing/gaming?

@anonviranon 5 месяцев назад

If you want low noise pc, all you need to do pickup low tdp parts, and buy high performance fan, set pwm to below 1.6k, 1k rpm will be the best but your CPU will be slightly hotter, you can't get low noise with high tdp parts and oc, your pc will keep pushing temp

@TheIndianDreamerX 6 месяцев назад

My Temparture missing from the AIO, any suggestion?

@khyo826 9 месяцев назад

not sure why the NZXT cam software is not detecting the cooling to control the lcd display panel. The Rgb lightings are detected and can be controlled. Please help

@TheProvokedPrawn 9 месяцев назад

Have you connected the USB from the pump to the motherboard.

@khyo826 9 месяцев назад

@@TheProvokedPrawn yes the both Usbs are connected to the motherboard via the nzxt splitter. The lcd is also running and I can read the cpu temperature but the component is not detected in the Computer. I checked both device manager and the Nzxt cam software as well. It does not detect/show up anything.

@Darryl.Harris Год назад

Hellooooo, Best intro ever. Nice/useful video, thx.

@TheProvokedPrawn Год назад

👍👍🦐

@millank5164 10 месяцев назад

Tubes can also be a problem sometimes, I buyed a silent loop 2 240mm from be quite and planned it mount at top, but tubes are long and hard to bend, it forced me to choose a front mount in fractal design pop air.

@alkatraz9171 8 месяцев назад

if my case have alredy fans mounted on the top i have to remove them and place the aio?

@bacontater1664 9 месяцев назад

What's that "air" case at 8:20? It's a setup I'm looking for.

@llbakall4980 7 месяцев назад

Can we have a list of components for the final build shown please as that looks fire!

@ExOhz Год назад

Anyone know cases that can fit the artic freezer ii 420 top mounted? Preferably white

@weekly860 8 месяцев назад

i want to know, if I only had 3 120mm intake front fans, but the 2 fan 240mm AIO exhausting, would that work??

@TheProvokedPrawn 8 месяцев назад

Possible but depends on your CPU. Worth testing yourself

@itzsabbage3830 Год назад

Is 6 in take 1 exhaust fans idea with 3 120 fans in the front as intake 360mm rad top mounted intake and 1 exhaust 120mm back fan

@saipabbala7103 3 месяца назад

side fans are intake if radiator on top?. also tubes down?

@samuelbrassey3998 Год назад

Hello! Im currently building a pc with a 4000d airflow. Im thinking of adding 360mm fans as intake and 280mm fans as top exhaust. Ill be using an air cooler for my 7600x cpu. Does this setup create positive air pressure in the case?? And will the cooling be sufficient for a 7900xt. Thanks!!

@loquacious1956 Год назад

I have a Corsair H170i 420 mm mounted at the front of my Lian Li Meshify III and I am looking at getting the new Corsair Link version but I am unsure as to whether it will fit due to what seems to be an extra protrusion at the top of the radiator for the "link" components.

@TheBattleRabbit860 6 месяцев назад

This video has been helpful in many ways, but the biggest issue I'm having is I'm getting confused by the numbers. The case says "up to 360", the AIO has "360" in it's name, but when I check the radiator dimensions, it's _larger_ than 360! How do I make sure it's _actually_ 360? Or does 360 in the name mean I can use it in a case that says "up to 360"?

@TheProvokedPrawn 6 месяцев назад

Yes

@TheBattleRabbit860 6 месяцев назад

@@TheProvokedPrawn Thank you! Now just need to finish saving and get started.

@SL1PSTAR 6 месяцев назад

The "360" is a reference to the fan size. A "360 AIO" is referring to a radiator which can hold three 120 mm fans which totals to "360" (120+120+120=360) This is the same for all AIO's.

@19kilo92 Год назад

Are you....Meoni? Final Fantasy 14 youtuber Meoni? You sound exactly like him

@TheProvokedPrawn Год назад

Maybe he sounds like me. Go ask him.

@rustylopez78 Год назад

No need to take out the radiator in different position to test, just turn the whole cpu .

@TheProvokedPrawn Год назад

You're a joker

@johnmichaelcobangbang8425 11 месяцев назад

you can bottom mount if the block is in the rad. really depends on where your rad is.

@Emexrulsier Год назад

Cheers foe the vid, I have mounted coolers in many positions before but still good to get someone's else's perspective. For me I find little to non difference running the cooler front (tubes at the top higher than cpu) or top. My cpu idles at 60 - 63 ish, I feel that too hot, especially when posts on reddit talk about this cooler 20C lower. Running h150i, 5900X in a fractal R6. No door on front of case, and open top