Which 3D Printer is BEST! Creality K1, Bambu Lab P1P or K1 MAX?

Подписаться 1,1 млн

Просмотров 190 тыс.

50% 1

So after having these 3 printers for a bit, I've put them all through the ringer! Print after print they're all proved to be true workhorses! So in this video, how about we compare the features and sizes of these 3 industry leading machines and see which one may be best for you?
Enjoy!
▼ MENTIONED IN VIDEO
K1 MAX Review | • Creality K1 Max Review...
K1 MAX |shrsl.com/4bmt4
Bambu P1P Review | • Bambu P1P Review - The...
Bambu P1P | tinyurl.com/h2...
K1 Review | • Bambu P1P Review - The...
K1 | shrsl.com/4bmt6
K1 Camera | amzn.to/3RrYvvV
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitch | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
My Etsy | www.etsy.com/s...
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
AMAZING Discount Codes! | tinyurl.com/4a...
☞ Check here for Up to Date Discounts and Codes!
ELEGOO| tinyurl.com/3z...
☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!
CREALITY | tinyurl.com/yh...
☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!
BAMBY LAB | tinyurl.com/yh...
☞ Visit Bambu for a variety of FDM 3D printers, from entry
level to advanced!
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 40% off awesome
3D models and files!
AMAZON | www.amazon.com...
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
Disclaimer- This video is NOT sponsored by any brands mentioned in this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
▼TIME STAMPS
#3dprinting #3dprinter #review

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 446

@gregoryhall2967 Год назад

Congrats on a million! Only a matter of time, you've entertained and helped sooooo many people with 3d printing and cosplay! 👍

@brguns Год назад

I need to replace my CR10s for a high speed printer. Since I don’t buy anything with less than 300x300 bed, K1 max is the only option. Thanks for the comparison!

@mikemarucci913 Год назад

My K1 Max was a disaster with bad first layers, tons of VFA, ghosting and ringing...Creality send me a new heat bed witch helped a bit but still crap first layers, so I took things into my own hands. I CADed some bushing to get the bed more level and I went from a 1.2-1.3mm variance to a .4mm and now my first layers are much better. I rooted the machine and did some proper input shaping witch made the ringing and ghosting about 80% better, not gone but better. The VFA got better by doing the Voron belt tensioning method. Also I have switched to OrcaSlicer and that alone helped with print quality. I had a ton of quality control issues from loose connectors to loose bolts and screws. I have 320 hours on my K1 max now and its as good as its going to get with this unit, I'm getting by with it. I have about 100 hours printing ASA and that chamber does get hot, i have seen temps from 50-60C depending the height of the print. I own 3 Bambu printers and 6 AMS units with 1500hrs between them with no issues since day one, just regular maintenance. The K1 Max is no Bambu and thats a fact in build quality, and print quality.

@AI40K Год назад

Recently picked up a P1S for my first FDM printer and it's an absolute dream. Thanks for doing all the reviews it really helped me making an informed choice :)

@nibblesful Год назад

Mine also just arrived, loving it. Have you had the failed to unload filament issue so far?

@AI40K Год назад

haven't had that issue myself yet - I've been switching between PLA and PETG, and pressing unload via the little screen pad on the machine itself. @@nibblesful

@Mrshotalot1st 10 месяцев назад

@@AI40Kany problems with the 3d printer? jus checking in

@AI40K 10 месяцев назад

@@Mrshotalot1st It has been running flawlessly, except when i tried some sunlu rainbow filament which was a bit stringy but might just be the colder weather & settings still be on defaults!

@gamelobby3145 3 дня назад

Just checking in now, have you had any more problems? Or is it still running flawlessly? I have been struggling to make a decision between the K1 and the P1S.

@Voxanez Год назад

Got my P1P a week ago and I love using it. Still need to do some tuning and learning to do but that's why I've been binging your videos lately lol excited to print my first cosplay with this thing!

@mikepowers9486 Год назад

Great video. So close to pulling the trigger on one of these printers. I think I will try my hardest to be a little more patient and wait to see if there is a holiday sale. Congrats on almost 1mil subs.

@lLoneRoninl 11 месяцев назад

Great review. Nice to see someone actually be honest rather than be a biased bambu fan. Plus not to mention you don’t blame the printers if something was actually your fault. Definitely will be coming here more often. Amazing work.

@sjschauer4235 Год назад

I was able to pick up the K1Max on sale and have loved it. The only issues I have had were like yours, user error, and a bad hot end that Creality sent me a replacement for. I love it, probably my new favorite printer. I really only use my Ender-5Pluss now to back it up or even larger parts.

@cinful1 Год назад

People often say they have horrible customer service so it’s nice to know you had an issue resolved

@sjschauer4235 Год назад

@@cinful1 it's not a quick process. It took a few days but having dealt with creality customer service in the past I know exactly what they need so sent them what they needed the first message.

@cinful1 Год назад

@@sjschauer4235 As long as I am able to get results is what matters. Not everyone can be Prusa or Elegoo

@nforc3r87 8 месяцев назад

@@sjschauer4235 I would take a few days. response time. I got a faulty P1S delivered. Its been 2.5 half months and still have issues. It takes 7 days for Bambu support to reply. I am watching these reviews and compare videos. Most likely will be returning this and if they dont offer advance RMA, I will get the Creality.

@driesopel 2 месяца назад

Congratulations on 1M. Just bought a K1 Max will be back home in about twee weeks and test it. I hope I don't have any problems 😕

@samjesse3818 Год назад

So excited, my P1P comes in today. Can't wait to start cranking out props

@MrMndon Год назад

You thank us in every video and for me, I thank you. What you've presented has taught me so much that I can't explain. Thank you for everything you do.

@michaelparadise9293 Год назад

I cannot wait for your 1 mil live video!!! You rock!! Me and my son will definitely be waiting to see when it comes out!!!

@michaelalanstlouis Год назад

And as for the display on the Bambu P1S, I used it once when I first got the printer to print the boat. Maybe the scraper too. But other than that I just print from the slicer. So the little screen is just fine.

@dyops Год назад

For a few months now, I've been researching which 1st printer to buy around my 50th bday this Nov. I made a comment in one of your videos (and others) that it's down to the P1S Combo and K1 Max since they are similarly priced with the K1 Max slightly cheaper with discounts and free shipping here in Canada. With only room and budget for 1 printer, I chose these 2 since it takes up less space than a bedslinger (have to account for the bed moving back and forth and screens that are way off 1 side on the slingers). The enclosure let's me print a wide range of materials. They are both fast and produce great quality prints. I am really impressed with your textured helmets without those layer rings on top. So, it really boils down to what are the things I will print the most which TBH, I still don't know as I want to print multi-colored things for myself, toys for the kids and to give as gifts (keychains, magnets, signs, light boxes, etc). But I also want to print cosplay stuff, not only for myself but for my kids too. The biggest future project is to print R2 and 3PO costumes for my twins while I dress in my Sandtrooper armour, so I can finally say, "I found the droids we're looking for!" 😂 Better if my wife dresses as Obi and I print parts, combined with cardboard, to make the stroller to look like a speeder. I don't think the latest Bambu will be larger but it makes me think again. I can buy the P1S Combo now and IF I can get a 2nd printer, it will be one of the budget "Plus" bedslingers. OR buy the K1 Max, and wait for an AMS for it or buy the new Bambu if the price is below $500. Still have at least a month to make a decision.

@multiversosdeleo3864 Год назад

The guys from Bambulab are going to give us some news on this 20th. We still don't know what is it. The "educated guess" is that's going to be a multiplexor to use multiple colors in any printer with the AMS. So my advice is wait for the 20th to make your final decision. Ps: I bought a K1 Max but I'm still waiting for it. I'm in Chile so it's a loooong way for the printer 😆

@dyops Год назад

@@multiversosdeleo3864 I believe it's a new printer. Rumors too say it's smaller than the current lineup. I think it was Nathan Build Robots who said it's not an AMS for other companies. The reason that convinced me it's not is - imagine the testing involved to make it compatible with different models of printers. It would be a nightmare and expensive! Why would they spend money for their competitors when they can get more customers to buy their products and ONLY their products? They sell parts, accessories for their printers and sell their own filaments. If it was a universal AMS for all, who gets blamed if it fails to produce a good print on, let's say, the K1 Max? Creality? Nope, Bambu Labs will be blamed. I don't think they will risk to tarnish their reputation. So 1st, it will be a new printer, mostly like more affordable for everyone,

@paulalexis6172 11 месяцев назад

I am almost in the same predicament I am in a hard spot not sure if to buy the p1s combo with the ams or the k1 max I really want to print helmits like the spiderman and Deadpool plus certain parts for cars the only thing tripping me up is the size the k1 max is bigger but am having doubt and thinking the p1s with the ams but idk

@sibertiger17 11 месяцев назад

I'm also just getting into it and unsure of what to get for first one....too many options, choices and brands... everyone has different opinions on what is best...I wish everyone would agree on one or two as the best to get all around printer but it seems experience, knowledge and personal taste affects the choice of which one...sigh it's so tough to choose

@zacpurcell2907 9 месяцев назад

I got the k1 max a few months ago and haven't had a single failed print. It's so much faster than my cr10 and prints much nicer. I got mine on the black Friday sale for 30% off so it was basically the same price as the p1s and the bed size is worth it

@colinmsmall Год назад

It’s interesting as a consumer to come across two videos regarding the K1 Max in a couple of days both from what I would consider to be reliable sources and have the experience and opinions on the device be so completely different. I’m referring to the Galactic Armory video on the K1 Max which I think even mentions this channel in the video.

@FranklyBuilt Год назад

Yeah! I saw his video. It’s wild how different our experiences have been. He’s a smart guy too

@andrewrushent2737 Год назад

If you hate the P1P interface the community are currently developing the P1Touch add-on for the P1P which adds an additional touch screen to the printer with additional functionality 😊

@JohnCarter-vo8ux Год назад

I did the P1Touch on my P1S, it's a good mod. Firmware is still being tinkered with, but it's definitely worth doing.

@wlow60 Год назад

Im waiting on my first Bambu p1s now! I cant wait. Could you do a review on the Voxelab Aquila x3? looks like some awesome upgrades over the older models. I'm considering upgrading my old aquilas to these

@proaudiorestore8926 Год назад

I own the P1S. The only time I use the screen is to turn off the internal light the which admittedly is a bit painful. Otherwise, everything is done either via Bambu Studio or Bambu Handy. The P1S is just a really fast and efficient machine. I have been printing for a long time now and what we are seeing now is almost a revolution in the market. Even cheap bedslingers are giving you great results for very little effort. We are almost at the push print and forget stage. Almost.

@malaythakkar8772 11 месяцев назад

@Clips_For_Lifeonly main difference is the enclosure

@SupaGEEKDesigns 10 месяцев назад

Just bought two K1 Max @ $650 at microcenter! Love this printer...

@caledavis6917 Год назад

Torn between the P1P/P1S and the K1 Max. Seems like lots of people are having issues with the K1 series but you seem to be doing well with it. Decisions decisions

@Gatsurendo Год назад

Pretty much all of the issues were the earliest models sent out of the K1. The K1 max had an upgraded extruder and that was also offered for like 2 dollars to the K1 users to fix theirs. The new K1 shipping out I believe comes with the newer extruder. Other than that the only main issue with the K1 series is some people are getting broken glass when shipped but that also happens with the bambus. My K1 has been beyond great aside from 1 bad roll of filament and user error here and there. Best bet is P1S or K1 Max tbh.

@AkiTsukita Год назад

I bought the K1 a week ago, got a new iteration extruder, and no problem at all.

@cosminlesutan3574 Год назад

The K1 AI camera is a special offer for 2$ with a bonus package after you buy the printer

@wykonczeni Год назад

Since when 2.99 is more like 2 not 3$?

@JohnCarter-vo8ux Год назад

Better hurry, that ends 9/21.

@Oogabooga-y9z Год назад

Congrats on 1 mil🎉🎉🎉

@qwerfa Год назад

Hey, nice writeup. However, I want to point out that, the K1 has a significant advantage over the stock P1P in the materials it can print out of the box. It's also, been discounted with bundles at 499 fairly regularly, so it's often a fair bit cheaper. I do agree though, that when they are the same price, if you don't care about more specialized filaments, the P1P is the clear winner. I have a K1, and It sometimes feels just a bit too small.

@TheCalaudio Год назад

What laminator do you use? I don't like the default quality that Creality Print gives

@qwerfa Год назад

@TheCalaudio I use Orca Slicer, but out of the box, you won't get better quality/speed than with creality's slicer. But creality slicer prints really well in my experience. If the print quality is really bad, check your print head. If the clip for the bowden tube is blue, you have the old extruder, and if the sleeve on your hot end is black, the old hot end. Some people report significant under extrusion with those.

@OlavAlexanderMjelde 10 месяцев назад

looks like the hardened nozzle is about 30 USD for the Bamboo Labs P1S

@northernlight8857 Год назад

Thank you for a clear and to the point review. I was considering buying the Kobra Max but the enclosed k1 max enticed me due to me having to have the printer at my homeoffice. I am thinking fumes, microplastics and such. I am going to use it primarily to print cosplaystuff. Is it a manageble printer for a rookie or is there another large bed printer you recommend? I will check out your etsy-store too. Have a great day.

@charlaverdiere8034 10 месяцев назад

Just purchased my K1 Max. I print smaller things. My Enders just don’t give me a smooth print. And I can’t honestly sell with any flaws. Thank you for your amazing videos. You are amazing

@codyfannin1660 8 месяцев назад

How has it treated you? I'm looking into one myself graduating from my 2 ender 3 v2 neo

@dacarter218 Год назад

Thanks for making such high quality videos that explain everything people want to know!

@Chriss_Workshop Год назад

All i need is an ams system for the k1 max. I've been debating a mosaic palette 3 for a bit to add multi material printing to my machines. But would love to see more companies follow in bambu's footsteps and make their own systems

@munstyman9 Год назад

Rumor is creality is working on one for the k1s actually

@oscaralcalaonyoutube 10 месяцев назад

Great content brotha, congrats on the Million!

@bahaaldeenzaben 2 месяца назад

One question after a big thank you for the channel and effort, can we print more than one cooler with it somehow?

@Maribel80ify Год назад

Wow 1 milion subs, congrats. Great videos

@Davedarko Год назад

Thank you for all the videos, love your enthusiasm, energy and reviews. I noticed something weird with your audio recently, which throws me off a bit. With every cut it seems like your audio is loud and then gets quieter over time, till a new cut starts loud again. Not sure how this happens, very noticeable here: 10:08 7:28 7:40 8:09

@FranklyBuilt Год назад

Yeaaaaah it’s my Lav mic

@Davedarko Год назад

@@FranklyBuilt interesting, wouldn't have guessed that, thought it might be something weird in editing! thanks and rock on :)

@MrSupermanMr 11 месяцев назад

Great review, may i ask if you can print IronMan helmet as one piece, then the back and face Also then later the suite in Bambu Lab P1? Your answer will determine if I will buy one

@judethedud 11 месяцев назад

Pro tip my guy- whatever editing software you're using, find the Normalize Audio button. Otherwise, thanks for a helpful comparison!

@blakelove4058 11 месяцев назад

I watched your first review of the K1 and you basically said it was crap and you wouldn't recommend it. Now all of a sudden its a great printer and you like it. What changed???

@divencia 11 месяцев назад

The filament turns brighter when it is printed at slower speeds. It is melted slower and makes it glossy

@golddiamondsgdpc3035 3 месяца назад

I’m new to 3D printing and there is so much Information to learn about printing and the size of 3D printers can’t wait to get my printer for my birthday 7/19 I’m so excited to use my first printer….

@jordanbackstrom2022 11 месяцев назад

Just found your channel - really great and very much appreciated!

@jonnybench7291 Год назад

Congrats on the upcoming 1 mil you deserve it ❤️❤️ idk if you watch Ashoka but Enoch’s helmet looks sick I don’t see anyone else making it, would love a vid on that 🙌🏻❤️

@aaron_exclusive Год назад

Can’t wait for the live stream man! I’ll make sure to be there :)

@michelvankuilenburg2099 11 месяцев назад

Hi Frank, Thank you for your comparison. I am an old Ender 3 Pro user, and printing random stuff. but recently also started printing mask for my daughter her cosplay. With my current ender 3 that is more difficult for the bed size. You mentioned the K1 max is the one to choose, but I am in a doubt, as the P1S with AMS sounds an ideal printer... I would love to go for the P1S, but have doubts if this is the one to choose, because of the bed size... Would love to get your opinion. thnx.

@jayson8118 Год назад

To be honest I would consider the Qidi x Plus 3 before any of these . For starters for the price you get a bigger build volume plus a heated chamber . The fact they rebuilt the inside frame after their preliminary one had issues shows a company which is willing to listen and do it right before releasing . Can't same the same for Creality who has shocking support ! The X1 Carbon is good but then their price is over the top and from memory has no heated chamber. The carbon rods I doubt for longevity and Qidi went away from them to hollow steal rods. I know some will disagree but I am right about Creality's shocking support ! Happy Printing.

@GMFootage11 Год назад

thanks im now gonna get a Bambu LAB P1P ive decided thanks frank so much and congrats on 1M

@97JoMiller Год назад

I have an X1 Carbon but have seriously considered the K1 Max because I need a bigger build plate

@ruthlessluder Месяц назад

How about print speed? I'm debating between the P1S and K1 Max... can you tell me which one prints the fastest (with the same quality so obviously not at max speed)?

@lyndonfoster1090 Год назад

Great video. I always enjoy your videos. So if i hear right for large core xy, probably k1 max and for large bed slingers, for you an eleego neptune 3 max? Thank you for another good video. Btw what are your thoughts on the safety and health worries with 3d printing now that you print everyday? Be interested in your thoughts on that and what you do to help midigate any concerns

@army310 Год назад

I so want to try the k1max I just worried about the sound since I live in Korea and in apartment. I don’t want to be rude to the other people and give a bad impression

@lornelorne5727 9 месяцев назад

Just got a Sovol SV06 Plus as my first printer, and I'm really tempted to return it and pay extra for the Creality K1 Max... Feels like there's a huge difference between them.

@ravenswoodprops Год назад

How about a video on general maintenance and upkeep for these printers? I'd really like to get one, but the design looks like it wouldn't be as easy to work with as an Ender or the like would be

@reprinted3D Год назад

About two weeks ago, Amazon had the K1 Max on sale for $708.11, so hopefully we'll see that price again.

@leesmithsworkshop Год назад

I have a P1P so slightly biased, but the AMS makes this printer so much better and so far everything has worked, like today as one example the filament ran out, but it was on a Bambu refill and the filament was not held on the spool so no jamming and I just put a new spool into the same slot and it loaded and carried on printing. It makes it so easy to load and unload filament and then the bonus of multi colour prints and 4 spools ready to go. The mobile app is smart enough to let you choose what slot you want to use if you re print a job from history too, shame you can't make folders for older printed files or print again from the desktop without slicing again, that is one of it's week points, no easy way to reprint the same job again. So I think the P1P or P1S are still the best option unless you really want the bigger print area for the price.

@Gatsurendo Год назад

K1 series let’s you reprint from the same file without slicing again from app, pc or the printer directly on older done prints unless you delete them.

@leesmithsworkshop Год назад

@@Gatsurendo it's klipper so I would expect it to do that just like my own Klipper printers.

@mark8971-p6z Год назад

happy 1mil frank i am a big fan

@Arloni 5 месяцев назад

Hello. Very good videos as always. A question for you... the printer quality from K1 Max compared to X1C Carbon is too different? I mean, I saw a lot of reviews saying that X1C print quality is superior to K1 Max - is that really true?

@StormchaserDan Год назад

As an owner of a stock P1P, P1S w/AMS & K1 Max, I totally agree. If I was getting another, I would probably go with another Max just because of the build plate. But I do like on-the-print speed changes with the Bambu products. I use it constantly and miss it with the K1.

@blueredstar8223 Год назад

Can’t wait for your live stream soon. Looking to get something like the reality k1 Max

@SeenAndCheese Год назад

Ask your buddy what he did to make it look better. I'm intrigued by the thought of making these machines run better/less noticeable layer lines.

@DJlegionuk Год назад

I would bet it was printed slower on the outside perimeter, faster speeds can make normal filament look dull.

@robind.5885 Год назад

Would you recommend the K1 Max or the new Anycubic Kobra 2 Max. Wanna buy a new one in December and can’t decide.

@JuanMakes Год назад

I love your content! my P1P will be here tomorrow, upgraded from a ender 3 v2 Neo, had great luck with it just time to step up to the next level and wanting to make some bigger and better prints. What is your top 5 places for High quality Designs that dont break the bank?

@Optikification 10 месяцев назад

Now looking at your video again as I am in the market for either a P1s or a K1 max. I don't really need AMS as i paint stuff and the K1 max does look interesting to sit next to my N3 max. I saw so many bad reviews for the K1 so think i'll skip that hence the K1 max.

@seantavarez9569 Год назад

You're the man! Where can I get the P1P enclosure file? I know it's not a full enclosure but it looks awesome!

@lachlanpryznyk3327 Год назад

Great vid like always, not just for this vid but in general where do you get your favourite 3d models? Curious bc you always find awesome ones and I can never find any

@FranklyBuilt Год назад

I have a whole video talking about 3D models actually

@lachlanpryznyk3327 Год назад

@@FranklyBuiltawesome thanks

@iquintero574 6 месяцев назад

This video really help me pinpoint on my first printer I would like to go with. Thank you

@travr6 6 месяцев назад

What did you get?

@MattClineBeats Год назад

Brother thanks for this video, it is helping me become informed before I purchase. What fdm printer (i really dont want to do resin) would you recommend for printing miniatures, potentially commercially? I don't know if I should purchase 2 $150 printers or 1 $350 printer but I am concerned about being able to produce enough in a reasonable time frame to meet orders. I am looking at the elegoo neptune 4 pro for example. Any insight would be much appreciated. Thank you and well done

@Antstar12 Год назад

I'm hoping Bambu Labs announcement tomorrow includes a large format printer. So far it looks like they might be announcings a bed slinger that can do multimaterial or possibly a resin printer. I'm still holding out hope for a 356x356x356 build volume version of the X1C.

@L0NGH0RNS77 Год назад

Ran across the K1 Max video and now watching this, it’s really sold me to get it. My Ender 3 Max neo just isn’t cutting for speeds. I’m having to split a basic helmet into 4 parts and those parts are still taking upwards of 2+ days. Seeing how it can print an entire helmet in 20-25 hours blows my mind. Do you have specific setting for the helmets you print to speed up the printing? I feel like I could adjust something to speed mine up a bit

@cameronjohnson8520 Год назад

you and me both brother. time to retire my max neo.

@L0NGH0RNS77 Год назад

@@cameronjohnson8520it’s almost a chore at this point and I had one fail last week 40 hours in. Heartbreaking. I’d rather something fail on the K1 max and know I can easily restart it and have it done again in less than a day

@ulforcemegamon3094 Год назад

@@L0NGH0RNS77 that is one of the main advantages of having a fast printer , failures hurt less because prints take less time

@corty1980 Год назад

I really enjoy your videos, especially the builds with the helmets. I currently have 2 x Anycubic Vypers and decided I wanted to do the Blue Beetle helmet after recently seeing the movie. I ended up having to scale the helmet up a little and splitting it up as it would print as a whole helmet. After doing some prep and trying to get it ready to paint I have come across a problem in that some of the lines that are cut into the face plate are either very faint or have disappeared. As a result I need to add these and have tried with a set of hook & pick tools and a dremel, though not really happy with the result. Have you had a similar problem and if so did you fix it and how? Would appreciate suggestions as I don't want to have to print again due to the time it takes.

@Sortyman Год назад

Would love to see a comparison vs the Qidi X-Plus 3!

@StumblingBumblingIdiot Год назад

Like your videos man. Was curious what kind of speeds you could get with each and keep the quality. I know the 500 and 600mm.s are just movement speeds but it would be nice to hit 300mm/s and keep great quality....yea, i want a lot...anyway hope you can cover that in a future video. Congrats on a million!

@RathOX 8 месяцев назад

What about the qidi x plus 3 or xmax 3?

@gunnarbeddoes13 10 месяцев назад

I just bought a P1P do you think it was the right choice over the P1S I’m only gonna be printing PLA and maybe some TPu

@FranklyBuilt 10 месяцев назад

Sure

@MattClineBeats Год назад

Also I am curious what features in a 3d printer can you not live without? For example, Wifi, auto leveling, lidar? What features do you find the most useful for efficiency and quality of life

@Walexander3243 Год назад

I'll let you know in 12 mins if my next printer is from Bambu or Creality. I already have 4 creality but Bambuuuuu

@KickBass3d Год назад

Your mins are up, sir

@Walexander3243 Год назад

@@KickBass3d yeah but the video is so good, I couldn't give the answer and let people not watch it!

@Sargento_Menta 10 месяцев назад

@@Walexander3243SPEAK

@tylertaylor9430 9 месяцев назад

@@Walexander3243bro the suspense is killing me

@DeRock401 9 месяцев назад

It’s been 3 months and Alexander is still making us wait.

@kellyjean4981 Год назад

I will have to keep my eye out for sales. Thanks for the info

@AlexPortRacing Год назад

Hi Frank, having dived into 3DP finally with a X1C purchase, I've gone from printing 3DBenchy's to a s Spiderman 2099 mask scaled to fit my grandson in just over a week! This is purely off the back of your content! Whilst having an tec background helps on the learning curve its the quality and enthusiasm of your content that stands out and has made the experience so much fun. I look forward to your Mk85 v2 series since as I will be using it to build myself a Mk85! Keep it up and thanks again.

@mrgtoyz Год назад

I've been printing those Pokemon in mini form for so long I never thought of printing them huge until now lol. Oh man that's gonna be fun.

@kvl3r Год назад

Awesome video thanx for breakin it down. I wonder though, why Sunlu? Dont get me wrong I mostly use Sunlu's filaments.

@FranklyBuilt Год назад

They just work.

@BrianWilliams-jt8cr Год назад

👍great info. What 3d printer would you recommend for printing armor? 😎

@yzinger2005 10 месяцев назад

Thanks so much for the awesome content! Can you please let me know how much power the k1 max consumes in an hour? I'd imagine it has to be close to the bamboo labs x1 carbon. Is there a code I can put in to give you credit for the printer purchase directly through creality? Thanks again for all the detail! Looking forward to getting my max soon!

@FranklyBuilt 10 месяцев назад

Uhhh…there’s zero way for me to know that haha I’m sorry

@YakovK09 Год назад

Awesome video as always Frank!

@rtl2607 4 месяца назад

Looking at getting the p1s have you used it? if so any tips on it? Looking to use it for cranking out wearable helmets

@seekertosecrets Год назад

I have an AnyCubic Kobra Max 2 coming in 3 weeks. It has the largest high speed bed size available under 500 bucks right now.

@diylondonblueboxbuild2763 Год назад

great fair comparison what mods or improvements could you make om the K1 max and will you be featuring them in an update. also what time uk do you put out the live streams please.

@FranklyBuilt Год назад

None. Upgrading printers is a dead hobby IMO. No point

@g0d0fninjas90 11 месяцев назад

I want your take on this; when I get a 3D printer I'm planning on printing the free DO3D iron man suit you have myself. After looking, I really like the P1S with the AMS system as not only does it keep the filament dry, it also will auto-swap filament if a spool runs out mid-print, making printing just that much easier (also supports multi-colouring but not sure if I would use that often). The P1S + AMS comes to the same price as the k1 max in my currency. Would it be better to get the K1 max due to the build size (since you said iron man helmets would need a bigger size) or would it be best to just get the P1S + AMS, and just split the helmet in pieces to then fuse together?

@JayzStudio Год назад

I love sunlu and i make a lot of cosplay mask do you stick with the pla+ or use the regular pla? i been mainly using pla but pla+ is $2 cheaper on Amazon, whats your thoughts?

@mikaelflink1145 10 месяцев назад

first thing, awsome review, but wich one did you make the thos hammer with ? :)

@FranklyBuilt 10 месяцев назад

Elegoo Neptune 3 max

@mikaelflink1145 10 месяцев назад

@@FranklyBuilt aa ok, I own neptune 3 plus but thinking about k1 max or something. Its little bit less printing bed but it seems easier 😁

@_ethereal_astro Год назад

I’m still in the market for my first printer. The build volume is def my biggest concern. While I can fuse the parts together, I’m leaning towards the K1 Max. But the X1C is so appealing it’s a tough decision. Guess I’ll wait for Bambu’s announcement coming up to see what that is. I’m going form the TOYBOX printer making small parts (i.e. Demon cores etc) and want to jump to bigger parts for cos’ing…such decisions. Speaking of the demon core, do you have any tips for painting a sphere?

@FranklyBuilt Год назад

Drill a small hole in the bottom for a toothpick

@_ethereal_astro Год назад

@@FranklyBuiltthanks I’ll give that a try

@AlbertoMartinez765 Год назад

Great Video!! Thank you will wait for Xmas or Black Friday Sale for a K1 Max

@Ichiashi Год назад

Once again another great video. Thank you.

@WKfpv Месяц назад

I am debating between a k1max and a p1s, the difference is that in my country a normal k1 is $894, the max is $1184 and the p1s without ams is $1400

@WKfpv Месяц назад

And if I want to print abrasives with the p1s I have to spend $100 more in upgrades.

@Trashcan_tony Год назад

Question: I have been printing for about 1 1/2 years so no where near an expert yet but slicing is the bane of my existence. I picked up a K1 Max and I love the printer overall but haven’t been able to figure out how to slice using the Creality slicer; e.g. the slicer freezes. I want to switch back to cura or any other slicer software but I don’t want to lose the functionality of high speed printing. Is this a sacrifice I have to live with if I print in any other filament/use any other slicer besides what Creality recommends? I hope this question makes sense…

@jaeeboom 2 месяца назад

Try OrcaSlicer it's the best one currently out. It's actually the slicer that Bamboo uses.

@AFKxander Год назад

After I watched this video I ordered a K1max. Don't let me down!

@marcushuneke2696 Год назад

would be very interesting to see a comaparison with the Qidi xmax 3

@lwstrongarm3 Год назад

Thanks to tiktok I found this channel... these printers look epic I wish I had any of em. So far I have a ender 3v2 that's it

@thegps7197 Год назад

Great to see competition in the market that isn't just about cost.

@sk8ter4fun Год назад

are you going to get the neptune 4 max? I'd be curious about your thoughts

@prankstarr 10 месяцев назад

What do you recommend to make big cosplay props and small miniatures for dnd,table top games

@peterclegg2609 Год назад

Have you looked at qidi xmax 3, really interested in this one.

@rhythmrainbow Год назад

I'm the 1 millionth subscriber!! 😄

@jcdixon01 Год назад

Great video. I am in that market for sure, ready to upgrade from my Ender 3. I need size, I want to print armor (or think I do anyway). I just can't decide...I know I need more build volume and I don't know if it is worth it to go K1MAX or another brand's bed slinger which is half the price for the same volume. Speed is not really my concern, and I typically stick with PLA...I would like the ability to print some outdoor type items, but I suppose I could convert my Ender for that stuff. I think my biggest hurdle is I don't know if the P1P is large enough for a helmet that would fit me. You have said you have a small head, and some of those spidey lidz were done on your P1P, but I think my head is bigger than yours (emptier, but larger).

@BRK-ee2se 11 месяцев назад

Bed stingers do take more tinkering for sure, I had pre ordered a neptune 4 max but just canceled it and ordered a k1 max just because as long as everything works the way it should it will be significantly less of a headache. I'll let you know how the k1max is once I get it.

@jcdixon01 11 месяцев назад

I ended up picking up an AnyCubic Kobra Max for $100, and I couldn’t be happier with it so far.