Which Automatic Water Level Control Float Valve should I use for my water tank? 

Find out more about our Automatic Water Level Control Float Valve at bit.ly/3y2ZoR7
Specifications
■ Male Thread: 1/2’’, 3/4" & 1"
■ Type: Mount Inside, Mount Outside
■ Water Inlet Direction: Horizontal/Side, Vertical/Top
■ Work Presume: 0.2 - 10Bar
■ Applicable medium: Clean water
■ Applicable medium temperature: ≤70 °
■ High-temperature medium temperature: 10 ° ~ 70 °
■ Size: ~4.64 x 3.07 x 2.28 inch/ 11.8 x 7.8 x 5.8 cm,
■ Color: Blue
Installation Tips
■ This product is a liquid level control valve.
■ After installation, the float must be vertical. If you need to install from the top, you need an elbow to connect the float valve and the inlet line. First, fix the water inlet pipeline on a horizontal surface, and then connect the automatic water level control valve to the water inlet according to the standard.
■ The main water inlet should be aligned with the normal diameter of the control valve.
■ When in use, the shut-off valve should be fully opened.
■ If two valves are installed in the same tank, they should be kept at the same level.
■ Before installation, please clean the impurities in the pipeline to prevent blockage.
■ If the water quality is not good, the valve needs to be properly maintained.
■ If the user finds that the time for adding water becomes longer, please clean the water inlet and rinse
What’s in the box?
■ 1x Water Level Control Valve
■ 1x White Tape
■ 1x Filter
For more information, please visit www.ewarehouse.my - Malaysia's Largest Home Improvement Online Store.
#atkc #ewarehouse #angkokgei

Хобби