Which Fence Post Driver Is THE BEAST? 

Thumbnail and editing on point 👌 Also, I concur. 👍

air system is the most useful. If you hit rock the air can be used for a rock drill and or a breaker/chisel. we use the pto one with the skidsteer only. Gas pounders suck unless you live in Florida

That Rhino I purchased from you will drive a 20 foot sand point well in sandy ground. It’s great Machine for the money. The hydraulic, I found it best to use a lever an some coil springs in on a tractor or skid steer bucket to make it float, Instead of lugging them around , they are impressive! To me the air is big of a hassle, extra equipment you have to lug around.

Greeting from sunny Florida! When i first started watching this channel, i thought driving was not thecway to go. In truth, i dint have experience with driving poats. ( we always dig) its a little intimidating when i dream of coming to work there, hopefully the learning curve wont be that steep.

Never knew such devices existed. I have heavy clay soil and was gonna go either the auger method or dynamite for a fence extension. This seems much easier with less chance of pissing off the neighbors.

I just ordered the Hammer and im pretty excited to see how much more productivity we have on chain link and vinyl.

QUESTION: How would YOU install a fence post (for vinyl) through an existing ashphalt driveway (cold climate) min 4' depth for frost?

Can you test Well Point Driving? Do I NEED a jack hammer for hardpan? Or will a Rhino GPD-45 be good enough? thanks

Where did you guys learn this stuff. Ive been following your channel a while. You guys switch from the concrete method to this. Where did the idea come from?

Is there a spec for the energy per strike (e.g., in foot-pounds) and strikes/minute rate? What are the respective horsepower inputs? Then compare to a demolition tool air hammer, which is the classic standard device for powered pounding on things. The 185 CFM compressor is like 50 HP; how are you even able to compare this to a 1 or 2 HP gasoline engine driver? Is the air tool really consuming anything like 185 CFM?

I've used a case skip loader, worked perfect. I see the gas one is all you need, hydraulic and pneumatic you need pumps

Is that Cody or Powell, easier to drive in the summer when the ground is not frozen?

Hey dudes… you kinda missed the Mark! Air, gas, hydraulic…. What about Otis? Around these parts, everyone knows the best post driver is Otis. Using a gas pipe he got from the utility company scrap yard…. A 10 pound plug welded into its end… two 1/2” rebar chunks, left over from John Stover’s loafing shed stem wall, bent into bow handles…. He made his own custom driver. His arms are the size of my thighs. His chest is puffed out like the Michelin Man. His 6’10” height gives him the wingspan of a two man glider. Otis can sink a post without breaking a sweat. I’ve seen him sink T-posts through Ozark Mountain dirt with just two whacks. And, snap them off if they hit limestone on their way down… I’d like to see you run that same test against Otis on T-posts….So, the next time you’re traveling through S/W MO. Call ahead and we can set up the test. Just make sure it’s before lunch. Because, he has to spend most afternoons distilling and testing his corn squeezings!

Greetings again from sunny Florida! The SWI logo with the bucking bronco really fits the Wyoming branding of your original location. Have you given any thought to a new logo to represent sunny Florida?

I'm having a good dang day!

yall install guardrail for WYDOT?

Interesting! Having a fence built here in north Texas, and he us using a skid steer to put post in the ground. I wondered what was out there. I'm too old to use my 40lb manual driver I made in my 20's. ;)

Is the hydraulic driver like a vibrator or a hammer type? Still want to see how those would perform in coral rock!

I like fence and fencing tools. I currently am fenceless.

so does the hydraulic version run off your mini skid steer? i’ve been interested in a hydraulic driver but don’t fully understand them.

central texas - I choose air

Amazing, I’m new to the fencing game and just found out about these beauties. Will this drive a square aluminum post ?

Will any of these work for 2-7/8” casing? Oilfield pipe?

Between air and hydraulic what’s best for mobility moving through trees and being a hundred feet or so away from your power source

Which model is the Air Rhino? I need to drive 4" SS40 post. Will the air rhino drive it? Or will an gas power driver drive a 4" post?

The hydraulic should be on a skid plate

How about, helmet and safety boots, shoes, and proper ear-guard, however good one, have chosen hydraulic.

Gas still wins for portability