Whirlpool 1 ton 3 star magic cool convert inverter ac remote functions, child lock 

Mai bhi yhi soch raha hu bhai 😂

Sabhi remote me aisa hi hotahai,aapcell nikal do agar long time use nhi hai to

It's default screen sir until you remove the battery

Bro agar instant cooling chahiye toh use the turbo mode but after some time u can switch over to normal mode. But my advice is you use less fan speed coz noise Kam hoga and chilled air bhi kafi samay tak ruk payegi, it will not sniff out from the small holes or gaps..

Bro 16 degree u can set but in actual sense it will not decrease the room temp at this level. In 0.7 ton mode cooling capacity means the power to cool the room will also decrease.

Bro it's inverter ac and that's the main function of such ac and as i am using LG ac since last 5 years, i didn't feel any problem....so u can use

Brother in my 1ton ac there is only three options C1,c2 and c3 and as per manual C3 means 0.7 ton and C1 means 0.9 ton.

Bro when you switch on the ac it takes few minutes for the compressor to get on and thereafter only the water start draining out from the pipe and as per the humid or dry climate the quantity of water vary, but you check the cooling of ac and check out for any leakage etc, and if it's in warranty period you can call the customer care for free servicing.

Bro jab garmi jyada acche se hogi tab water banega ac me

Bro my ac is getting E6 error in only 1 month of using

I am using 1 ton AC and it's sufficient for 90 sqft room, i am satisfied with it

1.5

Brother, agar aap Jaisalmer se hai toh wahan toh humidity nahi hai abhi kafi heat hogi, so if agar cooling thik hai toh koi gal ni, paani ka kya karna, as I am from south , toh idhar kafi humidity rahti hai, don't worry, leakage nahi hai andar toh koi baat nahi,

Monthly is okay

How to do auto clean

Nahi hai

As per manual in 1.5 ton AC , C4 indicate 1.65 ton

I think there may be dust on the indoor unit which causes frosting on the indoor unit, better you go ahead with regular servicing of ac by technician, either u can search video on RU-vid.

Well 100 to 140 sq ft area can be cooled with 1.5 ton AC , rest direct sunlight also affect the cooling....

Bro that's i didn't say, my mean is that C4 mode may work in 1.5 ton AC but as per the other person review that function is not available in 1.5 ton AC too

As per the environment condition, preferably once in month is fine

Aapke manual me kya likha me

Dim switch karo

No bro, its button are zinc jelly buttons that help in finding the remote in dark but doesn't show the button function, you have to remember the location of the button in remote

Voltas k low budget ac’s m bhi hoti hai Night mein phle light on karo and then remote ko use karo .. 0 rating dont buy it Whirlpool ac’s

No bro

Point the remote towards the indoor unit and press the turbo button 7 times within 10 second, it will show CL as a display in indoor unit, it means clean mode is activated, outdoor unit fan will run around 15 to 20 minutes and will clean the accumulated moisture.

Aawaz aati hai voltage ke kaaran same problem with me.

Temp up nd low button 6 sec hold kijiye

It's mean is indoor unit fan fault

Press the temperature up and down key simultaneously for around 5 seconds, the lock icon will be removed from the remote....

As per your requirement choose the mode 1 ton will give you more cooling rather than of 0.7 ton ac

Press the dim button in remote , that is the button which sw on and off the display in indoor unit

SW on your phone camera , point the remote sensor towards camera , and check whether any indication visible while pressing the button. If it is so it's mean remote is okay...if not then there may be sensor problem in inward unit

It cannot be

Remote batteries throw out

@@munipardhasaianil2940 No need i like AOD

Dim

Bro I think there is connection problem between indoor and outdoor unit, you check the power cable between indoor and outdoor unit.

See in remote there is convert button you press that button, initially it will show C1 in display mode of indoor unit, it means that this ac is now working as 0.9 ton ac . same way in C2 mode it will work as 0.8 ton and in C3 it will go down to 0.7 ton ac. If you press fourth time the same button it will show C4 in remote but there is no change in indoor unit display as C4 does not work. You again press the same button it will come back to normal 1 ton mode. This is how it works....

Can you explain the same for 1.5 ton?

@@skamalk040640091 so i have to put in C1 for good cooling . Right?

Sir in C1 mode it's 0.9 then in C2 it's 0.8 and in C3 it's 0.7 ton and in normal condition it is 1 ton as i am having 1 ton ac but that will be different in 1.5 ton Ac

@@skamalk040640091 pr company wale C1 ko 1.5 ton bta te hai c2 ko 1.25 ton C3 ko 0.9 ton C4 0.7

@@skamalk040640091 whirlpool Nitro cool 1.5 ton 3 star hai mere pass

Hmmm it is so they claim but in my ac in C4 mode it doesn't response and in the manual also they tell that in 1 ton model C4 will not work...

@@skamalk040640091 I bought 1.5 ton magic cool 4in 1 convertible Whirlpool 5 star Ac but c4 doesnt work in this also

Turbo

It's okay, no problem, i think that's default setting and it come in old model of ac , providing some time to compressor to come in its normal mode.....and simultaneously helping in removing the fungus etc in outdoor unit....

@@skamalk040640091 ok thank you brother

@@skamalk040640091 but main isse fix kaise kr sakta ho ?

@@skamalk040640091 ja phr main isse whirlpool k new function bol sakta ho ?

Magiccool converter ac

@@skamalk040640091 ac kee body mee likha hee dekh kee botaiye please... Ac kee star jahaa par hee udhar likha hee dekhiye

Buddy travelling right now, will let you know soon

Bro i am using it from three weeks and i am satisfied with its performance...

Use turbo and cooling functiom

Best coling bro

Sir, in Whirlpool AC it take some time to close the outlet of the Air flow in the indoor unit after pressing the switch off button in remote, you can wait for two three minutes it will be closed. If still it is opened then little bit adjustment with the Blade is required.

You can see another video on the same topic

Installation problem

I have 2 ac, Panasonic gives chilled air while whirlpool gives just cool air. Jaise hi ac off karo room garam ho jata h.

Same problem

Yes me too

Dear bro I am having 1ton ac and in this case in C1 mode it convert to 0.9 ton and in C3 mode it convert into 0.7 ton, for 1.5 ton AC these are different from C1 to C4 i e. In C4 mode ac convert to 1.65 ton....