We have issue with that NaturalDry system that opens the door at the end of cycle. Today door opened but that plestic rod that pushes door is not retracting back. For some reasin it is stuck in OUT position. After ON/OFF or unplug from socket we are still stuck with useless dishwasher.....
Hi Sir, apology for this. Please have a call for us so we could assist you. For urgent concerns, you may contact us at our service hotline: (02) 8230-1555 local 8300-8314 / 0917-8696111 / 0925-7372477.
@@edaunlu3756 What ive done: Pulled the dishwasher out just to be able to gain access to the top part. Then removed all screws that hold that motor on top of the dishwasher. This little motor pushes the door open at the end of the cycle. Next I removed that motor from its position. Did not disconnect wires, just leave it hanging. Close the door and start any washing program. Let it run till the end and that motor actuator will retract to normal position. Thwn just put all back with screws. Hope this will help you.
Connecting the inlet hose to the water source is the most difficult part of installation. Can't find anything about this in the internet especially for this model.
Hi, we suggest install the unit on the floor, since this is a free standing dishwasher. For installation For urgent concerns, you may contact us at our service hotline: (02) 8230-1555 local 8300-8314 / 0917-8696111 / 0925-7372477.
@@ChristianWagner888 my dishwasher, this model in the video, lasted 4 years. It has a non-stop warning about No Water Tap available, I've checked water pressure, clogs, even changed the water inlet with a brand new, and problem persists... My previous dishwasher was also a Whirlpool, it lasted 5 years until de controller board died.
@@mogwairider2766 thanks for sharing your experiences! That leaves us with few reasonable choices in the Philippines. Whirlpool is the only dishwasher brand that has some international sales of the same model. All others seem to be no-name Chinese brands that might break down after 6 weeks or 6 months with unknown service accessibility even during the nominal 1 year warranty.
Hello@@ChristianWagner888, just fixed the dishwasher. It was the water level sensor that was stucked. It started working after cleaning inside. if anyone has this problem, in this dishwasher the water level sensor is on the left side of the machine, and the water valve is on the back.