Тёмный

Why Didn't I Install These On My Jeep Sooner? Easy. High Clearance. Bomb Proof. 

Dirt Lifestyle
Подписаться 368 тыс.
Просмотров 103 тыс.
50% 1

Today we are installing a set of Swag Off-road body mounts. These were sooooo easy and make for a great beginner welding project. The low hanging body mounts on the Jeep TJ are a big problem if you enjoy a lot of rocks or time off road. Today we fix this problem once and for all! Enjoy and stay creative!
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps.com/account-pu...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon! / dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.

Авто/Мото

Опубликовано:

 

26 сен 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 244   
@Scoobienorth
@Scoobienorth 3 года назад
Often times it’s the small things that add up to make a rig functional. Nice to see some quick focus on them
@stevej6824
@stevej6824 3 года назад
I can tell you’re a man of quality when I saw that drawer full of Milwaukee tools 👍
@DirtLifestyle
@DirtLifestyle 3 года назад
Lol I'm a big fan of good tools 👍
@rhyswilliams695
@rhyswilliams695 3 года назад
Another great vid Nate. You’re a natural in front of the camera and on the tools! Easy to underestimate the time and effort put into making these quality short edits. We appreciate it. Keep em’ coming!
@DirtLifestyle
@DirtLifestyle 3 года назад
Thank you!
@CodyFazio
@CodyFazio 3 года назад
Up here in the northeast the welded nuts for the body mount bolts hidden in the tub love to break free and spin. Good times
@davyleupz
@davyleupz 3 года назад
Definitely next upgrade on my XJ. 😂
@frankrizzo367
@frankrizzo367 3 года назад
I dont have a jeep, I dont go offroad. I still love your videos for the fabrication and tips. Thanks!
@212caboose
@212caboose 3 года назад
This vid makes me want to build a TJ!!! Awesome content, thank you!
@dubCanuck1
@dubCanuck1 3 года назад
Digging the tunes on this vid. Was wondering when the TDI would make another appearance.
@korbian
@korbian 3 года назад
Yeah I have been waiting for more TDI videos
@1966cambo
@1966cambo 3 года назад
BOB SAGET 400 hp TD I? Wow,gotta look that one up!
@dubCanuck1
@dubCanuck1 3 года назад
@@1966cambo yeah. I was curioua on that too. Usually it's 200 hp/400 tq without sacrificing greatly on the tq side.
@RAGEallNITE13
@RAGEallNITE13 3 года назад
Solid work! I can’t wait to put these on combined with full boat sides
@JoseOrtiz_1416
@JoseOrtiz_1416 3 года назад
Has anyone ever mentioned that in the work suit you were you look like a sushi chef ? 😂😂
@tomcranks
@tomcranks 3 года назад
I was thinking Hop Sing from Bonanza.
@onetruebob_tj
@onetruebob_tj 3 года назад
Definitely looks like a restaurant worker
@DirtLifestyle
@DirtLifestyle 3 года назад
Lol this is a first
@shekharmoona544
@shekharmoona544 3 года назад
Hibachi!!!
@onlyusechopstik
@onlyusechopstik 3 года назад
As a former sushi chef, I find this an agreeable take 😋
@OntarioFreshwaterFishing
@OntarioFreshwaterFishing 3 года назад
Another great video. Been a long time watcher of yours. Actually you are the only reason I ever subbed to Bleepin Jeep. I think your video quality has improved quite alot since you went on your own. Keep up the great work!!
@DirtLifestyle
@DirtLifestyle 3 года назад
Thank you for sticking around! And thank you for the giant compliment 👍
@1000186ful
@1000186ful 3 года назад
Man your shop is awsome thanks all cool build stuff
@forgemientka3820
@forgemientka3820 3 года назад
Your videos on fab work on the low buck diesel truck have taught me SOOO much, for my Comanche build. Currently passing with an A in my welding class because of your tutorial on using a speed square!!
@DirtLifestyle
@DirtLifestyle 3 года назад
Thanks great to hear man! I'm so pumped to see such a positive comment! Much appreciated my brother 🤘
@kevinhornbuckle
@kevinhornbuckle 3 года назад
This video brought joy to my life today. Quality part, quality welding.
@jasonlaurence9518
@jasonlaurence9518 3 года назад
Love watching your work and ideas! Keep it up!
@DirtLifestyle
@DirtLifestyle 3 года назад
Thanks!
@Malcolmftwftw
@Malcolmftwftw 3 года назад
Man, the quality of your videos is awesome. Really inspiring making me want to learn to fabricate
@1000186ful
@1000186ful 3 года назад
Man your shop is awsome
@DirtLifestyle
@DirtLifestyle 3 года назад
I'm very fortunate 👍
@ms.karihart2983
@ms.karihart2983 3 года назад
Beautifully executed
@jdenmark1287
@jdenmark1287 3 года назад
You’re a rockstar of humble knowledge. Keep up the great work. Btw you can put a French drain in front or behind your garage door and eliminate the water infiltration.
@DirtLifestyle
@DirtLifestyle 3 года назад
I've thought about installing some trough drains up there i just haven't gotten around to it 👍
@DirtLifestyle
@DirtLifestyle 3 года назад
And thank you for the compliment brother 👍
@jdenmark1287
@jdenmark1287 3 года назад
Dirt Lifestyle haha I have a thousand such projects, too. Aloha from Hawaii 🤙🏻
@onetruebob_tj
@onetruebob_tj 3 года назад
Jeep logic... Let me do the most complex upgrade/mod before I take care of something that should have been completed years ago. I know exactly what you are talking about!!! LOL
@DirtLifestyle
@DirtLifestyle 3 года назад
Lol
@piasprojects
@piasprojects 3 года назад
Great video! I’ve definitely checked out these body mounts for a future mod!!
@rickmarquart3277
@rickmarquart3277 3 года назад
Nice brackets. Thanks Nate👍🏻
@metaldog7128
@metaldog7128 3 года назад
Love your welding 👍 it keeps getting better 😀
@built4xploration253
@built4xploration253 3 года назад
Loved the vibe bro! Great video.
@DirtLifestyle
@DirtLifestyle 3 года назад
Thanks!
@kg2995
@kg2995 3 года назад
Great video. Thanks, Nate.
@renegade4wd12
@renegade4wd12 3 года назад
Some very nice mounts Nate. Looks great installed.
@Dallas-Rife-UDX-347-Tennessee
@Dallas-Rife-UDX-347-Tennessee 3 года назад
That’s pretty sturdy and genius looking . Great looking Jeep . Keep on wheeling 💪🏼
@Rockin00TJ
@Rockin00TJ 3 года назад
Great video and useful tips! My body mounts look like your old ones...now to make them look like your new ones!
@luismason190
@luismason190 3 года назад
Hey Nate, awesome video, you do such great work with not only your Jeep but with the editing, keep it up 👍
@DirtLifestyle
@DirtLifestyle 3 года назад
Thank you!
@johnnybravo380
@johnnybravo380 3 года назад
Those look amazing
@johnra1269
@johnra1269 3 года назад
Awesome upgrade
@TheFrankBarrett
@TheFrankBarrett 3 года назад
Jeep pron on a rainy day, perfect! Good to see you wrenching on the TJ again.
@DirtLifestyle
@DirtLifestyle 3 года назад
Thanks buddy 👍
@expert244
@expert244 3 года назад
Great video per usual, keep up the good work!
@TheEinart
@TheEinart 3 года назад
A really cool upgrade, now thinking to boxing my bodymounts as well😅
@joachimburg1122
@joachimburg1122 3 года назад
Loved the humour you put into this one. :-P As always, thank you for the great content.
@DirtLifestyle
@DirtLifestyle 3 года назад
Thank you!
@momobadilak
@momobadilak 3 года назад
new nickname : "That's not just one rock" Nate ;)
@DirtLifestyle
@DirtLifestyle 3 года назад
Lol
@peters2860
@peters2860 3 года назад
Check out the gravel inside the frame :-0
@jkontons6340
@jkontons6340 3 года назад
Hey man. You have really motivated me to start working on my keep again. The videos are killer and keep up the great work. Also I have been using a company called Roark supply for all my cut off wheels and flap wheels. I am not sponsored by them but they have great deals.
@toddpalmer3507
@toddpalmer3507 3 года назад
One of the best upgrades you can do
@AdamWheels
@AdamWheels 3 года назад
Cant wait for another wheeling video! Also, I'm sure you are spending most of the time on the disco, but when is the LowBuck going to come back to us?
@DirtLifestyle
@DirtLifestyle 3 года назад
I shot the next wheeling video yesterday 👍. I'm not sure on the LBDT. I might do a short video on it soon. I have many other projects that unfortunately have priority right now.
@vinjkdiesel3122
@vinjkdiesel3122 3 года назад
The last time I saw body mounts that bad were on a drag car that crashed at 100+ mph. Nice work Nate, love the channel brah 🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽
@TrashPandaGarage
@TrashPandaGarage 3 года назад
Awesome video, Nate! Loved the shot at 5:37 :)
@DirtLifestyle
@DirtLifestyle 3 года назад
Thank you!
@lukefortenberry2998
@lukefortenberry2998 3 года назад
Looks like you are able to move them up and remove the body lift but still maintain that body hight that’s awesome!
@TheBibleExplorer
@TheBibleExplorer 3 года назад
That made a huge difference,looks awesome too brother 👍
@DirtLifestyle
@DirtLifestyle 3 года назад
Thanks!
@changingdirection443
@changingdirection443 3 года назад
I hate to keep saying it but another great video. Love the welding tech.
@matthewgood8864
@matthewgood8864 3 года назад
Great video, enjoyed the music. Look forward to new videos every week
@VictorVectorJKU
@VictorVectorJKU 3 года назад
Great quick video! you got me cracking up with “yup that worked” when straightening that body mount and “water world”. Hope you guys have a great time out on the rocks today! Sounds like Reiter maybe. 🤔
@DirtLifestyle
@DirtLifestyle 3 года назад
Lol thanks man! Reiter was epic. The edit starts now 👍
@VictorVectorJKU
@VictorVectorJKU 3 года назад
Dirt Lifestyle heck yeah! Can’t wait to see it! Saw Kelly dropped on his tub and looks like he bent up his slider and tub a bit 😬
@ryanhubble9157
@ryanhubble9157 3 года назад
Looks like u could just these to do a small body lift and look like great places to land some boat side rocks cool video Nate keep up the good work
@TheTreadLife_
@TheTreadLife_ 3 года назад
Muddy got ya beat on the painting though ;). I liked how he taped off the weld area and painted them. Then finish welded them on the frame and finished painting. I totally get what you mean about all the paint being rubbed off the next day haha.
@DirtLifestyle
@DirtLifestyle 3 года назад
Muddy?
@TheTreadLife_
@TheTreadLife_ 3 года назад
Dirt Lifestyle Sorry. KELLY from muddy beards. He just did the same boat sides in one of his most recent videos. I kinda figured that was why you also did them :)
@TwinStickCrawlers
@TwinStickCrawlers 3 года назад
I was actually looking at these the other day. The mounts on my YJ are starting to look like an M. Definitely need to add those to the list.
@Justforfun-ek7et
@Justforfun-ek7et 3 года назад
Not gonna lie, I thought you were talking about Portal Axles. 😢 I was excited to see you add that to the Jeep. But these body mounts make sense.
@DirtLifestyle
@DirtLifestyle 3 года назад
Lol why do some of you think I'm getting protals? If I have the money that would be great but I've never even mentioned them on the channel before 😆
@WilliamPozo
@WilliamPozo 3 года назад
Good video! Felt like i didn't get to see the final picture with the rattle can paint job..!
@michaelharris1455
@michaelharris1455 3 года назад
Hey Nate, another great video, thank you. Just an ideer, an old fashioned welder's cap like you wear, with a Dirt Lifestyle logo...... getting hard to find the old style caps.
@DirtLifestyle
@DirtLifestyle 3 года назад
My wife is looking into these as we speak 🤘
@warhammercustomsllc541
@warhammercustomsllc541 3 года назад
Looks good dude haha great thing about pnw the rain I use my weed burner to dry the concrete works great ha
@hunterc1055
@hunterc1055 3 года назад
I'd love to have your expertise for laying out my build that I'm doing on my 2004 4.0 TJ Sahara, I have learned a ton from your videos but I have a long way to go on slowly building up my jeep while being full-time in college. My biggest purchase and upgrade so far has been my GenRight Aluminum Highlines which I was able to install after fighting quite a bit with the hood haha! Wanting to dana 44 swap, do a 3.5" suspension with 1" body low COG build on 37s, maybe 40's someday but it is my daily, so I'm trying to keep it driving nice.
@jeep534h7
@jeep534h7 3 года назад
Excellent as always Where did you get the Worklights
@twwtb
@twwtb 3 года назад
I really like the SWAG products I have.
@MyDatrsPrsnlATM
@MyDatrsPrsnlATM 3 года назад
Those are nice!
@rjpierson9847
@rjpierson9847 3 года назад
Great job bud
@DirtLifestyle
@DirtLifestyle 3 года назад
Thanks!
@dorsk84
@dorsk84 3 года назад
You had a surprise rain storm in Washington..... color me shocked.
@alsmith1025
@alsmith1025 3 года назад
interesting. This was pretty cool.
@95Z28A4
@95Z28A4 3 года назад
Great job and good tip on fitting them before tacking them together to account for vehicle variances. Have you tried Dupli-color satin black wheel paint? I use it on most of the brackets I make - interior and exterior. It is very good for irregular surfaces because it dries quickly and doesn't run. It's tough, too.
@DirtLifestyle
@DirtLifestyle 3 года назад
I haven't but am willing 👍
@abrahamespinosa2297
@abrahamespinosa2297 3 года назад
Excelente trabajo en mío bueno cuando se pone a soldar a cortar los metales 👍👍👍👍👍👍👍👍👍Saludos desde Antofagasta Chile mi amigo 🇨🇱🇨🇱🇨🇱🇨🇱
@DirtLifestyle
@DirtLifestyle 3 года назад
This isn't my language but it looks positive and I appreciate it! Thank you for watching mi amigo 🤘
@abrahamespinosa2297
@abrahamespinosa2297 3 года назад
@@DirtLifestyle l love your vídeos are excellent and more when you modify the jeep greetings from chile 😁😁😁😁😁😁😁😁😁😁😁👍👍👍👍👍👍👍👍👍👍
@james4wd236
@james4wd236 3 года назад
I wish I had that shop...
@brianfedie8046
@brianfedie8046 3 года назад
Nice!
@dhrracer
@dhrracer 3 года назад
Why not build brackets that incorporate your body mounts and extend out too also be your rock sliders? Then with skid plates covering front to back and from the outer edge all the way to the frame. The first down side I could see is the weight. Your thoughts?
@DirtLifestyle
@DirtLifestyle 3 года назад
I plan on boat sides eventually 👍
@jaybrown2424
@jaybrown2424 3 года назад
LITTLE RAIN IN WA, NOOO ,OREGON ALSO RIGHT THERE WITH YA
@greendodge98
@greendodge98 3 года назад
Nate I would really like to see you use some weld though primer
@TheBeardedJeeper
@TheBeardedJeeper 3 года назад
Looks good man I gotta get better at welding
@nastycbr
@nastycbr 3 года назад
I think we all say that everytime we watch Nate weld.
@TheBeardedJeeper
@TheBeardedJeeper 3 года назад
nastycbr true story. I’ll get there one day just gotta keep practicing
@DirtLifestyle
@DirtLifestyle 3 года назад
I want to get better as well my friend! We all just need to put in the hours to sharpen our skill sets 👍
@michaelhalstead64
@michaelhalstead64 3 года назад
Dope!
@SWBCrawler
@SWBCrawler 3 года назад
Very nice man. These are on my short list, and in fact just this morning was talking to a friend about how I want to incorporate something like these into a high clearance belly pan I want to build. Curious, what do you do about the rear frame body mounts? just pucks? Thanks!
@DirtLifestyle
@DirtLifestyle 3 года назад
The rears are still just body lift pucks 👍
@michaelhite1433
@michaelhite1433 3 года назад
Wonder if something like this could be done on the LR Disco 1. The rockers and suspension/body mounts hang pretty low. I’m cutting what’s left of my rockers off and turning them into sliders/rocker panels.
@TheAlaskaCajun
@TheAlaskaCajun 3 года назад
I need to do this on my Geo Tracker 🤣
@endless_potatoes
@endless_potatoes 3 года назад
Get yourself a squegee on a broom handle, then you can easily clean liquid spills or wash the floor
@JoeRocket-sf6qs
@JoeRocket-sf6qs 3 года назад
Only three sides of contact on the chassis mount weld, you reckon that will be strong enough?
@KevinButler35
@KevinButler35 3 года назад
TDI pleassssseeeeeee, great video btw.
@BigCatRiverFishing
@BigCatRiverFishing 3 года назад
Awesome idea to upgrade! I am definitely going to consider this! Do you already have a body lift installed prior to this or are you not running one? Thanks!
@DirtLifestyle
@DirtLifestyle 3 года назад
Yes sir! It had a 1"body lift so I just removed the 6 center pucks for extra clearance 👍
@jamesgoldman6711
@jamesgoldman6711 3 года назад
Have you thought about making a video on replacing the center body mount tub sections for those people that need to replace them from rust? I have seen a company that makes frame and tub replacement panels to make the job even easier.
@DirtLifestyle
@DirtLifestyle 3 года назад
I have not brother, it's not an issue we have in the Pacific north west 👍
@jodyandmichelle1
@jodyandmichelle1 3 года назад
What tailgate mod is that? Looks cool.
@timbollinger3209
@timbollinger3209 3 года назад
Love SWAG STUFF, looks great. HAY, how’s that Liberty winch bumper build for you wife coming along. 🤷‍♂️
@DirtLifestyle
@DirtLifestyle 3 года назад
It's painted and installed. More updates to come 👍
@Dmowery5036
@Dmowery5036 3 года назад
Nice jeeps! What year is the fsj?
@392hellscat7
@392hellscat7 3 года назад
Cool video Nate. I have a body mount nutsert that is spinning that is holding a cheapo nerf bar rock slider on my TJ which has kissed many rocks and needs to be upgraded. Do you recommend cutting a hole in the body to get to the nutsert or something else?
@DirtLifestyle
@DirtLifestyle 3 года назад
I haven't had to fix this problem so unfortunately I don't have any advise on the subject 👍
@dalemcwilliams8006
@dalemcwilliams8006 3 года назад
So I've been watching your channel for a couple weeks now. Kinda binge watching, with everything you do, why don't you own a lift??? I do, and it make fabricating certain items, and welding overhead so much nicer
@DirtLifestyle
@DirtLifestyle 3 года назад
Lol a lift takes up to much space for me. One day i want to get a commercial space. Then I will absolutely get a lift 👍
@LJ_Jeff
@LJ_Jeff 3 года назад
Would've been the perfect time to toss in some fresh body bushings. Other wise great video and something I've looked at doing myself for some time now.
@DirtLifestyle
@DirtLifestyle 3 года назад
These are still in great shape! The chassis on has 54k miles lol
@LJ_Jeff
@LJ_Jeff 3 года назад
@@DirtLifestyle oh wow! I figured it had probably 3 times that many miles haha.
@lukefortenberry2998
@lukefortenberry2998 3 года назад
So I have a question if you where to do it over would you still do the tdi swap? Clearly more usable power in the appropriate area over the stock 4.0 but was it really worth it? If so is there anything you would do differently?
@christianglaude6659
@christianglaude6659 3 года назад
Hi Nate I couldn't see you welding your parts on to the frame, do you weld your brackets going up or going down? If you're going up , what were your settings? Thanks
@DirtLifestyle
@DirtLifestyle 3 года назад
I welded going down. My machine is auto set so I just put in 1/4" .035 wire and it did the rest. I used the 1/4" setting because I like to weld hot and move my puddle fast when welding vertical 👍
@nemesis851_
@nemesis851_ 3 года назад
Hi Nate, question: The wheels look like Method, but I can't find a wheel with the valve stem protector seen at 2:59 on the rear wheel If they aren't Method Grid/Mesh, then what brand and model Thanks
@jamessutherland5107
@jamessutherland5107 3 года назад
LOL. 15 yrs into it, I just did mine last summer. I was down to 2 of 8 on my commando. It aint just you
@DirtLifestyle
@DirtLifestyle 3 года назад
Lol
@wvjeepguy8178
@wvjeepguy8178 3 года назад
Hey man, you should really look into a set of boatside rockers. I have the version made by Dave's Customs Unlimited and they're a game changer for rocker area clearance.
@DirtLifestyle
@DirtLifestyle 3 года назад
I've been planning on building a set for years, just haven't gotten there yet 👍
@wvjeepguy8178
@wvjeepguy8178 3 года назад
@@DirtLifestyle Dave's only charges $300 for their set, which makes it really hard to beat that price when you consider the substantial material and time cost of building them yourself. The install is definitely tricky.
@pappaclutch3266
@pappaclutch3266 3 года назад
Does the heat from the welder effect the frames rigidity? Also when welding on a vehicle should you disconnect the battery first, to save the computer? Thx
@DirtLifestyle
@DirtLifestyle 3 года назад
It should of effect the structure of the frame as much as the old mounts did. Good or bad 👍 I don't disconnect the battery before welding.
@northernjeep942
@northernjeep942 3 года назад
Looks like a good and seems like it'd help a ton. When are we going to see low buck diesel truck again?
@DirtLifestyle
@DirtLifestyle 3 года назад
Not sure man, many folks have projects that take years to complete. The low buck diesel truck is i. That category to me. I will continue chipping away at it but I have some other projects that have priority. Slowly but surely it will be completed 👍
@northernjeep942
@northernjeep942 3 года назад
@@DirtLifestyle i get it! I have my 93 YJ, 79 square body and some dirt bikes lol
@bustersmith5569
@bustersmith5569 3 года назад
Who gives this a thumbs down ?? WTH......
@Ntmoffi
@Ntmoffi 3 года назад
Sometimes it's a fat finger that does it.
@4schitzangiggles
@4schitzangiggles 3 года назад
@@Ntmoffi bet the lady's like them though...
@DirtLifestyle
@DirtLifestyle 3 года назад
Lol not sure man! Someone has rung the bell to get notifications when i launch a video AND they thumbs down every video as soon it goes live. Every video. Seems ridiculous to me 🤦‍♂️
@bustersmith5569
@bustersmith5569 3 года назад
@@DirtLifestyle I like your videos...... I think you do a great job !!! 👍 and do a very good job at explaining thinks..... TY..
@Thuggernatious
@Thuggernatious 3 года назад
Clickbait title most likely. Great content though.
@rcmike09
@rcmike09 3 года назад
So, across the top, on the frame, is there no weld across it? I know the rest of the welds will hold it, but my old would want that welded also.
@DirtLifestyle
@DirtLifestyle 3 года назад
I welded the top from inside the bracket 👍
@shekharmoona544
@shekharmoona544 3 года назад
I'm surprised he didn't go with the chassis swap from Wide Open Design.
@henrycolestage7650
@henrycolestage7650 3 года назад
Just curious, what about the top seam on the bracket/ chassis and under the body? I would have thought that it would be an important weld. Curious minds want to know! Kind regards,
@DirtLifestyle
@DirtLifestyle 3 года назад
Hey man! I welded it from the inside. Swag make a larger hole then you need to hit this spot 👍
@henrycolestage7650
@henrycolestage7650 3 года назад
@@DirtLifestyle Cool, thanks! I wondered how you were going to get around having to lift the body off! Well done ;-)
@woodcrafter76
@woodcrafter76 3 года назад
Makes me wonder why they don't do things like this at the factory . If you ever want to do a video series on swapping a solid axle into a Blazer, I'd be willing to let you use mine for the demo. ;)
@demented_cycles
@demented_cycles 3 года назад
Looks like you took the body lift pucks off and mounted the new brackets higher. Having less leverage on the body bolts will help bending along with the design of the new brackets
@fredcastor75
@fredcastor75 3 года назад
What color is the tj? What's the paint code? Awesome videos!
@DirtLifestyle
@DirtLifestyle 3 года назад
Not sure on the paint code man 👍
@chopperchuck
@chopperchuck 3 года назад
sometimes it more important to get the job done then it is to be able to say i made every bracket by hand
@Kevin90909
@Kevin90909 3 года назад
So how long did the "two hour" project really take? And how long would it have been without the cameras?
@DirtLifestyle
@DirtLifestyle 3 года назад
I could knock this out in 2 hrs with no cameras easy. But with cameras I started between 5 and 6 in the morning and finished the edit around 11 at night. Then I went out to the shop to do a quick coat of paint 👍
@Kevin90909
@Kevin90909 3 года назад
@@DirtLifestyle Long day
@kevinkc3onohelijeepworld953
@kevinkc3onohelijeepworld953 3 года назад
You made that look to easy 😳😧🤣
Далее
НРАВИТСЯ ЭТОТ ФОРМАТ??
00:37
Просмотров 1,6 млн
Best Of Customer States 2024 So Far
31:31
Просмотров 474 тыс.
Choosing The BEST Axle Gear Ratio
18:07
Просмотров 66 тыс.
Harbor Freight Bender Hacks, Tips and Tricks!
12:54
Stretched TJ
5:43
Просмотров 34 тыс.
Differential Lockers! ARB vs Yukon vs Detroit vs Spool
16:34
профи на Тракторе Т-16
0:24
Просмотров 2 млн