Why Do I Need To Clean My Turbo? & HOW TO Clean YOUR Turbo 💎

Подписаться 49 тыс.

Просмотров 273 тыс.

50% 1

Have YOU ever wondered "why do I need to clean my turbo"? Would you like to know how to clean YOUR turbo? Let me explain 'why' and show you 'how'.
📽 Also make sure to keep your MAP sensor clean: • Dirty MAP Sensor Probl...
📽 And your car's throttle body: • Clean Your Car's Throt...
💡 Subscribe and hit that bell 🔔 to learn more about looking after your car: bit.ly/Subscribe_to_Cyd
💚 If you got some VALUE from this video, PLEASE give it a ‘like’ and maybe consider showing your appreciation by buying me a coffee: paypal.me/cyclonecyd
Wynns Turbo Cleaner spray (1 can will do 3-5 cleans, so is good value)
UK: amzn.to/2ICL0ID USA: amzn.to/32HCfEg
Learn more about looking after your car:
🎥 The importance of keeping your battery clean:
www.youtube.com/watch?v=gBkDO...
🎥 A comprehensive guide to battery and alternator testing
www.youtube.com/watch?v=AT_Xm...
🎥 How to replace a CV [constant velocity] joint boot with a split kit:
www.youtube.com/watch?v=MuEgT...
🎥 Don’t let your fuel filter end up like this:
www.youtube.com/watch?v=8aZLT...
00:00 intro
00:33 Remove turbo intake
00:49 Why should I clean my turbo
02:02 Endoscope view of dirty turbo
02:20 What to use to clean turbo?
02:32 How to clean your turbo
02:58 endoscope view of clean turbo
03:04 run your engine & checks
03:20 Benefit of cleaning your turbo
Everyone should have a tyre pressure gauge in their glovebox:
bit.ly/Tyre_press_guage
bit.ly/Pressure_Gauge_2
I personally prefer a stirrup pump to a foot pump (I use the same one for my bikes and cars)
bit.ly/Tyre_stirrup_pump
If you’d like to learn about the science and engineering of cars:
Bosch Automotive Handbook:
amzn.to/39va9xA
Are you trying to grow your own RU-vid channel? I use TubeBuddy, try it out for free:
www.Tubebuddy.com/CycloneCyd
I edit my videos with Filmora X. Why not give it a try, or just find out more:
bit.ly/Try_Filmora_X
Thank you

Авто/Мото

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 156

@CycloneCyd 3 года назад

📽 Also make sure to keep your MAP sensor clean: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pgPCrioK-6A.html 👍

@Smith6265 3 года назад

Wow I just cleaned mine , I can fill the Difference 😀

@bobtheman1 2 года назад

Great video with an easy to understand explanation of why and how to clean a turbo. Thank you!

@CycloneCyd 2 года назад

👍👍🎓

@precool Год назад

Excellent video! Thank you. I’m ready to clean up mine! 💨💨💨

@chrismc1977 2 года назад

For best results clean both compressor & turbine sides of the turbo. Compressor side with any kind of solvent based spray or product as used. Turbine (hot) side with mr muscle- especially good at freeing sticky VNT mechanisms

@martinneumann7783 3 года назад

Great! Short and useful. Thank you, Cyclone Cyd!

@CycloneCyd 3 года назад

You're welcome!

@SJSOmar 3 года назад

Never knew you had to clean a turbocharger ... you learn something new everyday ..

@CycloneCyd 3 года назад

Every day is a skool day 😂. But seriously ... I try to learn something new every day. It's become very important to me since a *serious* head injury 5 years ago (I'm a PTSD sufferer now).

@jamesj.litteriojr.433 3 года назад

@@CycloneCyd Sorry to hear about your head injury. Going through something similar with vertigo. Great vid especially when people run the cheapest gas in a turbo car!

@jacquelinebishop8465 5 месяцев назад

I can't believe the difference after using this. I bought my motor and about 3 months later, it seemed to lose its power on acceleration . I thought I'd give this a go and followed directions . It feels like when I bought it again . Much appreciated for the video

@mitchrich6 Год назад

Awesome, just what I wanted

@precool Год назад

Wynn’s is tough to get here in the states. CRC is in all the parts stores so that’s what I used. 🏁👍🏻

@1936cord812 Год назад

Thanks for this video Cyd, I have a 1.2 TSI, that showed all sorts of problems I replaced the 2 sensors. That helped, but sometimes the engine felt gutless, I used Winns to clean the turbo and I get 5-10% better fuel consumption and no loss of power.

@James-P96 Месяц назад

Were you having an actuator code come up EPC and engine light on dash and going into limp mode I've cleaned my actuator and having the same issue and been told it's the turbos vanes so going to try this and hope it works

@jamrockrc172 3 года назад

Love your video good info keep them coming 👍👍👍🔥🔥🔥

@CycloneCyd 3 года назад

Thanks, will do!

@franciscosolis3034 2 года назад

Not a bad video to watch. Very informative.

@CycloneCyd Год назад

Thanks Francisco.

@BamaTony73 9 месяцев назад

That would be crazy to take the turbo out just to clean it. Lol I just took mine out in my BMW X1 and it wasn't fun at all. Trying to get my new head gasket in it and be back on the road. Good video I appreciate it.

@aadd3538 11 месяцев назад

I use Mr Muscle. It would be nice to clean the exhaust side . Vw have variable vane type.

@maxthecaddy8451 3 года назад

kak-handed in one of your comments, have not herd that for long time, good vid Cyd 👍

@CycloneCyd 3 года назад

😂😂😂 Hey, thanks!

@phermn 3 года назад

Believe it or not, I've actually had really good results with Mr Muscle oven cleaner!

@CycloneCyd 3 года назад

Mr Muscle is a brilliant cleaner. Just don't let it near any zinc or aluminium castings. It'll dissolve both metals.

@magdalenoybarra2793 Год назад

🤩good show my friend🤠. Greetings from Texas

@CycloneCyd Год назад

Thank you

@codydillenbeck4443 2 года назад

Nice, you have a SAAB!

@MyLisap Месяц назад

Hi any easy way to clean the turbo/vanes on the hot side? cheers

@sbr1160 9 месяцев назад

I've just bought a KO4 turbo for my golf GTI I'd bought some turbo cleaner for a different car but never used it, if I spray that into my turbo off the car ( as a preventive measure for when fitting ) how would I remove all the residual turbo cleaner as a diyer?

@douglasgreen437 2 года назад

Very good 👍

@CycloneCyd 2 года назад

Thank you! Cheers!

@bobbondarul7448 Год назад

Nice For the error code p0234 how is posible to clean the geometry? Thank you

@mydog1234 Год назад

How long do you leave the foam on before starting the next squirt?

@RemyMartinVSOP Год назад

How would you do this on a Saab 9-3 turbo B207R it's so tight round the back there?

@precool Год назад

Love it mate! I’m trying the cold engine/turbo method. Let ya know how it goes. 🔥

@CycloneCyd Год назад

How did you get on?

@precool Год назад

@@CycloneCyd I cleaned it exactly as you did here. After about a day I could feel better boost, more blow off sounds, and a slightly deeper roar from the turbo. All I can say is thank you! 👍🏻👍🏻👍🏻

@paramsandhu7067 4 месяца назад

Hi. How to remove the foam from the turbo after the cleaning. Does it evaporate or need to blow air

@forgottenknowledge8917 29 дней назад

You gotta pull it apart if you want to clean the vanes properly. I'm gonna try an Italian tune up first. Get it nice and hot and burn the crud away. If that doesn't work I'll pull it apart. I don't trust cleaners and solvents as some can ruin parts.

@VeritySkiff 2 года назад

Great video. I have a 350 CID diesel on my boat. The compressor vanes are filthy. Two questions. 1) Why did you disconnect the air inlet to the throttle body first? 2) Is this product OK to use on a diesel? I am worried that the product will wipe the lubricant from the cylinder walls. Any idea or experience with using this product on diesels?

@CycloneCyd 2 года назад

Actually, although I decided against showing it I also sprayed the compressor from the outlet side. Yeah, use on diesels, no problem.

@vermontvermont9292 5 месяцев назад

Go figure, I stop to get some caliper grease , and low and behold a new turbo and intake valve cleaner that foams! Its from gumout which is a very decent brand here in the USA. Tomorrow, well today...almost 3am , ill be doing rear brakes. Then cleaning my turbo, my throttle body, and hopefully the intake valves.

@_t_f_ 3 года назад

Thanks as always Cyd, I'm probably going to do this on my 9-3 tomorrow. Might clean off the throttle body/maf again and put my parted 9-3 black coils packs find on.. (I got all 4 black tops from a guy who didn't know anything about Saab for $20.) Also, is there any way you could describe to me an appropriate amount of (seemingly) motor oil inside the TB intake hose? Last time I cleaned TB, I noticed there was a pretty good film of very very sticky oil in there.

@CycloneCyd 3 года назад

That was a good buy. Yeah, get those black tops fitted and just keep the others as spares. Yeah I get an oil film on the TB intake hose. Mostly it comes from the inlet mani. The PCV valve is in the mani where it contacts the head and it breathes into the mani from the cam chamber. The cam chamber is full of oil mist most of the time thanks to the cams being lubed by splash feeding. If you take your TB off you'll find the mani has a pool of oil at the bottom. Use a turkey baster to get it out. Some of this oil mist gets into the intake hose with the air pulses that naturally occur in any IC engine. The only way to stop it is to install a catch can, which I am planning to do and there will be a video.

@eddieg8218 2 года назад

@@CycloneCyd did u ever Doo the catch can

@danyo1972 Год назад

@@CycloneCyd Would excessive oil indicate excessive blow-by?

@samuelelder9434 3 года назад

Do you rinse the “foam” out?

@90dribbler 2 года назад

Awesome vid - done this few times already. But! Today I heard a loud bang when spraying. Engine was shaking a lot before the bang happened.. Turned the car off & on again and it idles ok. Even did the 10x up to 3K rpm to get rid of the soot and it sounded fine. Did I knocked something out!

@CycloneCyd 2 года назад

I take it you were spraying this into the turbo while the engine was running? That does make the engin run rough. It's possible you 'swamped' the cylinders and caused a misfire. That's one reason why I advocate cleaning with the engine off. Unburnt fuel and cleaner can get into the cat and if the cat is hot it can ignite. Cats are kind of tough yet delicate at the same time and such ignition can blow them apart. If doing it with th eengine running, spray in short pulses.

@90dribbler 2 года назад

@@CycloneCyd Wow, this explains so much. Thank you. Need to get my cat checked in that case. At least it's not the turbo as I thought! And the bang must be a misfire, it was quite loud and metallic, but the car still runs and boosts... okish.

@filip1997andersson 3 года назад

Could you make a video on how to replace the rear o2 sensor on your 9-3 saab, i cant find any instruction on how to do it

@CycloneCyd 3 года назад

I've added it to the list (which is quite long). ✔

@macmcdade5071 3 года назад

I'm a fan of Mr. Muscle oven cleaner. Used that on my Mondeo while I had it.

@CycloneCyd 3 года назад

NEVER use Mr Muscle (or other oven cleaners) in the way shown here. If you remember any chemistry from scool, this is why: 2Al(s) + 2NaOH(aq) + 6H2O → 2Na+(aq) + 2[Al(OH)4]- + 3H2(g) and Zn+2NaOH→Na2ZnO2+H2

@macmcdade5071 3 года назад

Eh? 😂 Barley remember school let alone one subject. Although presumably the above means "corrosive"?

@CycloneCyd 3 года назад

@@macmcdade5071 YES, it will eat the alloy away

@richardmathers7238 3 года назад

What would happen if mr muscle hot in the combustion chamber ? Reason I ask I wanted to remove map sensor and spray it down intake hope for it to reach egr valve ?

@CycloneCyd 3 года назад

@@richardmathers7238 NO, don't. As above it 'eats' aluminium away.

@bronniesboy 3 месяца назад

Hi can you use me muscles cleaner as it foam based to

@vermontvermont9292 5 месяцев назад

That turbo is so tiny lol. I like using crc intake valve and turbo cleaner. Id love to find something that foams like that here in the states.

@MrAssassinash 3 года назад

Nice 1

@CycloneCyd 3 года назад

Thanks for watching

@SteelyDavey Год назад

I'd like to clean my disco 2 but i'm a little apprehensive because I don't have a scanner to delete anything. I would have thought that if you use the whole can, there would be a lot of the product sat inside the turbo (don't think it evaporates), then it would be sucked through into the engine on start-up. Do I have anything to worry about.?

@CycloneCyd Год назад

If you spray cleaner into the turbo with the engine running, then due to the speed the cleaner passes through the turbo it is bound to take much more cleaner to do the job. Wynns would suggest doing it this way because then you have to buy a new can every time you clean your turbo. Do it as I suggest with the engine OFF - you don't need so much then. Also you can disconnect the output pipe from the compressor and stuff some rag in to catch the dirty cleaner. Give it a final rinse with some conventional carb cleaner and leave it to dry out before putting it back together and starting up. You should have no trouble that way. Get yourself one of these (amzn.to/3ctONXV) and download Torque Pro onto your phone (Android) and for a total of about 15 quid you've got a OBD2 code reader and much much more.

@dinartesantos1456 3 года назад

Hi I been following you and thanks for the videos. I got oil leaking in turbo pipes and sirens noise from turbo to, Do you know if I can do the same on audi a3 tdi bkd engine?

@Shera_S3EYG 2 года назад

Check your pcv valve

@christopherjones4789 2 года назад

What about Wynns turbo cleaner fuel additive? Would you recommend for a 9-3 Turbo Edition 120?

@CycloneCyd 2 года назад

Nothing you add to fuel can clean your turbo compressor. 'Super' fuel is far better than any additive. Use it all the time.

@Robert-px1vg 2 года назад

i used liqui moly and sprayed directly on the turbine while the engine was running On golf 6 1.2tsi 77kw

@CycloneCyd 2 года назад

Which Liqui Moly product?

@Robert-px1vg 2 года назад

@@CycloneCyd liqui moly drosselklappenreiniger/ throttle body cleaner

@Robert-px1vg 2 года назад

@@CycloneCyd at idle between 2500 and idle lock 4000 rpm

@diyguy2471 2 года назад

Will this process cleans the wastegate as well. As my vauxhall combo 1.3 diesel wastegate is sticking and van won't go over 3000 rpm and there is a fault code turbocharger boost pressure sensor

@CycloneCyd 2 года назад

NO, this cleans the compressor ONLY. Test your sensor (try cleaning it first ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pgPCrioK-6A.html) and wastegate to make sure it's not stuck. Don't forget to check the wiring too.

@Jussayinisall Год назад

Love your videos!! Thank you for all the great info! After you spray the cleaner, does it evaporate, drain on its own or do you have to do something to get it out? And, with the Saabs, is it fairly easy to do? I have an 06. Thanks again!

@jaekwangChoi 3 года назад

thanks for your good info. here in korea we dont have turbo cleaners. can i use carb cleaner instead?

@CycloneCyd 3 года назад

Yes, use carb cleaner. Let us know how you get on

@Dondolini94 2 года назад

My turbo progressively got clogged, the mechanic said he unclogged the sensor and now he get no error from the car, but it is still stuck. I bought this product as a last ditch effort, hoping that simply the valve was clogged and the turbo got stuck because it wasn't told to work anymore. Finger crossed, i'll let you know! Do you suggest more than 2 applications? I kept driving for some months out of necessity, after the turbo stopped working.

@guardiandogoargentinos1385 2 года назад

@Dondolini94 did this fix your problem?

@badboi922 3 года назад

Have you had any issues with turbo actuator on 1.2tsi engine? Iv got a fault code P334A which is intermittent, not sure if this would help

@CycloneCyd 3 года назад

I'd say it has to be worth a try. You should clean the turbo periodically anyway. You're probably going to need a new actuator. I'd be trying one of these aftermarket units: bit.ly/2XATcgC105hp_actuator

@georgekolotouros9176 3 года назад

On my Saab 9-3 B207 engine , if i removed the air pipe next to the MAF sensor and sprey the turbocharger from there is it good enough cause it's much easier ?

@CycloneCyd 3 года назад

It is rather awkward on the B207. if you want to spray from the top of the cobra pipe, then use ordinary carb cleaner. I don't think it's as effective but it will help if you do it regularly (say, once a year). It's not too difficult to remove the cobra and get at the turbo intake if you use the Wynns cleaner as it's quite a small can. It also gives you the opportunity to inspect the cobra for this problem ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bgLn14dZL3Q.html

@georgekolotouros9176 3 года назад

@@CycloneCyd Thanks for the suggestion . I'm afraid that the EML will show up ( since the turboboost never been clean before ) and I do not have a code reader ( tech 2 ) to cancel it .In case it will show up , if i disconnect the batterry ( Lets say about an hour ) will it go away ?

@islandhopperstuart 3 года назад

I would advise against sticking a lolly stick or anything else solid down into the compressor. The vanes of the rotor are easily damaged and, once you've done that, repair becomes much more involved and expensive.

@CycloneCyd 3 года назад

Hence the advice to use a coffee stirrer. The vanes aren't THAT delicate, but it is true they can be easily damaged if you're kak-handed with something like a screwdriver.

@richardmathers7238 3 года назад

Hi I thought the vans were on the hot side not compressor side ? But I hope your right because I’m going to try this 👍

@CycloneCyd 3 года назад

They are. Both wheels have vanes. A compressor wheel on cold side and a turbine wheel on hot side 👍. The 'variable vanes' you get on VVT turbos are just on the hot side because it's easier to engineer because of the geometry.

@javemaceda 2 года назад

How long do you need to let the solvent soak for after squirting a bit in? Thanks in advance!

@craighousley219 Год назад

Where does all the dirt that comes off the turbo end up? Doesn't it all just end up in the engine (in the cylinder) and cause problems there ? Particularly if you spray a full can in through the air intake as per Wynn's instructions?

@CycloneCyd Год назад

It goes into the engine to be burnt.

@craighousley219 Год назад

@@CycloneCyd thanks - and that's not a problem then? Sorry - I'm a bit clueless.

@CycloneCyd Год назад

@@craighousley219 no problem

@sabinislami8884 2 года назад

Hello! Im having a issue with my car where i floor it and it needs time to pick up the gas(turbo opens later than it needs) especialy in bigger gears where i floor it,it runs great but its that delay that annoys me..Do you think this can help my problem?

@lolorick5885 Год назад

I have used Wynn turbo cleaner, with no positive results, Mr muscle Oven cleaner does the trick

@StrongFreeLovin 2 года назад

So you actaully pushed that dirt further and it will clog the valves now? I don't know if that's any use.

@CycloneCyd 2 года назад

👎👎

@tysonmodestus8520 3 года назад

Must i use the hole can

@CycloneCyd 3 года назад

The instructions say to do so, but I have found that one can is good for 4-5 cleans. You might have to use a bit more if it's the first time it's been done in many miles, after that it's just a matter of keeping it clean, maybe once a year. So, short answer, NO

@basangtiti_31 3 года назад

can you clean turbo soaked with oil with this?

@CycloneCyd 2 года назад

You should be able to with repeat applications, BUT that oil has to go somewhere and it's likely to be the IC. Could you disconnect the output pipe while you clean it and catch the carp in rag?

@steveprentice4513 2 месяца назад

Unfortunately these cleaners don't clean the VNT nozzle itself because it's sealed unit

@rock_0075 3 года назад

Thanks for the video, I have got Citron Diesel car, recetly have issues (having loud noise from front of the car when i drive on motorway above 40mph) took to mechanic and he says its turbo charger faulty and needs to be replaced (but quite expensive) and i am also seeing warning Particle Filter risk of blockage , is there any way to clear this warning? Thanks

@CycloneCyd 3 года назад

You need to drive in a manner that allows the DPF to regenerate. Usually this means a steady speed with engine warm and above 2500rpm. It usually takes around 15 minutes so a 20 mile trip up a quiet motorway should do it.

@e60tube90 3 года назад

Wrong first diagnose it fix thé faults then they can regenerate thé dpf. If you have faults it wont do a regeneration of it's own. Just use a dpf cleaner after you fixed thé faults . Check the glowplugs for faults

@kennethandersen4839 3 года назад

What about the exhaust part of the turbo, will it also be cleaned by this foamy additive?

@CycloneCyd 3 года назад

NO. Blimey, if only all questions were this easy to answer 😆😂

@kennethandersen4839 3 года назад

@@CycloneCyd any idea how to clean that up? 😀

@e60tube90 3 года назад

@@kennethandersen4839 yep remove it

@outland4 2 года назад

@@kennethandersen4839 use 1:200 2 stroke oil. In less than 2 gas tanks it will be like new

@guardiandogoargentinos1385 2 года назад

@@outland4 why is that?

@philipperolland1319 3 года назад

hi guys, it's philippe from france. my question is not related to the subject but I cannot find a solution to discuss it with you. my saab is a 9.3 convertible 2005 and my problem is with fault message system TC and the same for ESP. I don't know if you had a solution to these problems. I read a topic but no solution. they talk about electric cable. if you have any idea i will be very interested

@CycloneCyd 3 года назад

I'm assuming you also have an ABS light on? One of the common faults these suffer is an internally broken wire to a rear WSS. The break is usually close to where the cables jump from body to rear suspension. Unplug the WSS and connect together the wires on the body harness. Then find those wires at the big ABS connector and measure the continuity with an ohmeter. if you use the buzzer function you can also waggle the wires along their length and listen if the buzzer note changes or goes off. If the ABS is still okay, then it could be the clockspring in the CIM. Have you had a new clutch in the last 2 years? Also check that ALL the controls on the steering wheel are working okay (incl horn)

@philipperolland1319 3 года назад

@@CycloneCyd Thank you very much for your answer . These problems appear from time to time, but always at the same time. For the turbo it cuts the turbo and I no longer have a turbo meter at the same time I no longer have a speedometer. Simply turning off the ignition and restarting makes the problem go away. for info it's an automatic 175hp turbo. 4 cylinders. I tell you about my life, but I am a bit alone with my problems and it feels good to speak with a person who knows the Car. I also have a message: limited power which appears the same way. the engine is running but the car does not move or is very difficult. If you have an idea ? thank you and good evening

@tayson259 Год назад

Mr muscolo best cleaner

@lenningradrio6304 10 месяцев назад

So, you don't have to dismantle the turbo?

@V7HD1 3 года назад

Hello i have a 320d e91 would this help me with my issue im having low power on low rpm up till 2000 rpms and then it works normaly ?

@CycloneCyd 3 года назад

It might, diesels are more prone to gumming up the compressor. Does yours have a VVT turbo? (variable vane). If so it could be the vanes gummed up on the 'hot' side. Try running it on premium diesel for a few tanks and give it a few 'italian' tunes when it's properly warmed up. Do you do mostly short (

@V7HD1 3 года назад

@@CycloneCyd im always running it on premium diesel just used the wynns cleaner and had no difference so idk what to do now

@outland4 2 года назад

@@V7HD1 try 2 strokes oil 1:200 in 2 tanks and with a medium /heavy foot it Will free your vanes

@jasoncrane4624 3 года назад

Would this help a sticking actuator Valve on a BMW 535d

@CycloneCyd 3 года назад

Hi Jason, are you meaning something like a wastegate actuator solenoid or part of the vvt system? i had a sticky solenoid on my car when I bought it. A quick spray through with carb cleaner, let it dry and it's been okay since. For variable vane problems, no this won't help. This can only clean the 'cold' side of the turbo. For the 'hot' side, you need to find a way in somehow for the cleaner. The EGR pipework may help. If that's a no-go, fill a full tank with VPower diesel and during the tankfull give the car 3 or 4 'Italian tunes'.

@jasoncrane4624 3 года назад

@@CycloneCyd Yeah sorry it's the wastegate actuator, the rod does not move, so not sure if it's got enough vacuum to move it, tried to move it by hand, it does move but very stiff. I did pull off the vacuum hose off the end and I cudnt fell any vacuum but that was when the car is at idle so I not sure how much vacuum there is supposed to be, gonna try a handheld vacuum pump today see if it moves the rod to open the wastegate.

@jasoncrane4624 3 года назад

@@CycloneCyd check my chanel I did put a video up of what I mean. Thanks

@CycloneCyd 3 года назад

@@jasoncrane4624 yeah, they are hard to move by hand. Test with a vac pump first because the actuator may have a split diaphragm or other leak. If that's okay then it'll almost certainly be the solenoid that activates it.

@jasoncrane4624 3 года назад

@@CycloneCyd nice one thanks alot

@bp6837 3 года назад

Can i use carburator cleaner instead

@CycloneCyd 2 года назад

Yes, you could, but wait a while for it to dry before starting

@bp6837 2 года назад

@@CycloneCyd thank you

@user-og9ms4oj2h 3 года назад

Better clean manifold

@CycloneCyd 3 года назад

I have another video on cleaning the throttle body 👍

@DS-nq1dg 3 года назад

How in the world did you do that on a Saab without taking everything apart? lol

@gijoemolinaro Год назад

Wheres the before photo of the turbo????

@generosoticzon5253 Год назад

How much the price

@CycloneCyd Год назад

which price?

@precool Год назад

Here’s an update. I had a bad intercooler out hose. It was also loose and bad now the turbo is fantastic.!

@magdalenoybarra2793 Год назад

Your voice reminds me of Benny Hill.

@CycloneCyd Год назад

Ecky thump, that's a blast from the past! So un-PC these days. Classic.

@wadman4997 3 года назад

Engineer wadman how to no about turbo

@CycloneCyd 3 года назад

Keeping them clean is important.

@JSSTyger Год назад

Why design truck with turbos knowing we're gonna get them dirty?

@binagarten4667 10 месяцев назад

I hate Wynns products, I placed Wynns Dry Fuel in 3 cars all started to run rough. I got the AA out and they drain the fuel tanks and with fuel prices thee way they are I had to dispose 150Liters of fuel. SO I lost £300 worth of the Juice. They all ran fine thereafter. I then decided to use the Wynns EGR Diesel cleaner and the emissions light came on, the DPF filter and turbo needed changing cost of £1500 plus labour. I contacted Wynns adn the response was talk to the hand. Never will I buy there rubbish products again!

@itzerisadomeeiot4980 2 года назад

all that dirt inside your turbo is going inside and its going to destroy it.. i rather clean ig manually remove every parts and its good as brand new.. you dont need to be lazy not to clean it

@CycloneCyd 2 года назад

"is going inside" - huh❓ It's already 'inside'. But you carry on if you like.