Why Doesn't My Lawn Mower Have An Oil Drain Plug? (DAY 26)

Подписаться 677 тыс.

Просмотров 52 тыс.

0% 0

DAY 26 of ⭐30 DAYS OF QUESTIONS⭐ Why Doesn't My Lawn Mower Have An Oil Drain Plug? ✅CLICK HERE TO BUY AN OIL EXTRACTOR ➜ amzn.to/3kq21st
Click below 👇👇👇 for the links to the other questions...
⭐30 DAYS OF QUESTIONS⭐ - (Links will be updated as the videos are put out)
👉DAY 1 - Is A Stihl 4-Mix Engine A 2-Stroke Or A 4-Stroke? ➜ • Is A Stihl 4-Mix Engin...
👉DAY 2 - Are John Deere riding lawn mowers made by MTD? ➜ • Are John Deere Riding ...
👉DAY 3 - How Do I Break In A New Chainsaw? ➜ • How Do I Break In A Ne...
👉DAY 4 - Does Soaking WeedEater Line In Water Actually Help? ➜ • Does Soaking WeedEater...
👉DAY 5 - Why Does My Briggs Lawn Mower Say Never Change The Oil? ➜ • Video
👉DAY 6 - Can I Use Outboard Mix Oil In My Chain Saw? ➜ • Can I Use Outboard Mix...
👉DAY 7 - What Is Your Favorite Chain Saw? ➜ • What Is Your Favorite ...
👉DAY 8 - Why Does My Grass Chute Keep Plugging Up? ➜ • Why Does My Grass Chut...
👉DAY 9 - What Does The Purge Bulb Actually Do? ➜ • What Does The Purge Bu...
👉DAY 10 - What Is Your Favorite Penetrating Oil? ➜ • What Is Your Favorite ...
👉DAY 11 - How Do I UnFlood My Chainsaw Or Weed Eater? ➜ • How Do I UnFlood My Ch...
👉DAY 12 - What Is The Best 2-Stroke Gas / Oil Mix Ratio? ➜ • Why Is There Such A HU...
👉DAY 13 - Why Does My Leaf Blower Bog Out When I Pull The Trigger? ➜ • Why Does My Leaf Blowe...
👉DAY 14 - What Does WARRANTY Actually Mean? ➜ • What Does WARRANTY Act...
👉DAY 15 - Can I Remove ETHANOL From My Gas? ➜ • Can I Remove ETHANOL F...
👉DAY 16 - Why Is My Pressure Washer So Hard To Pull Start? ➜ • Why Is My Pressure Was...
👉DAY 17 - Why Does My Chain Saw Leak Oil? ➜ • Why Does My Chain Saw ...
👉DAY 18 - Can I Use Old Dirty Motor Oil As Bar And Chain Oil In My Chain Saw? ➜ • Can I Use Old Dirty Mo...
👉DAY 19 - Should I Buy My John Deere Lawn Mower From Home Depot Or My Dealer? ➜ • Should I Buy My John D...
👉DAY 20 - Do Battery Powered Chain Saws Work Good? ➜ • Do Battery Powered Cha...
👉DAY 21 - (FAKE NEWS) Honda Is Stopping Lawn Mower Production? ➜ • (FAKE NEWS) Honda Is S...
👉DAY 22 - Will cleaning the rust off my flywheel help with spark? ➜ • Does Cleaning Flywheel...
👉DAY 23 - NO SPARK! How Do I Know If My Coil / Ignition Module Is Faulty? ➜ • NO SPARK! How Do I Kno...
👉DAY 24 - Will I Destroy My Pressure Washer By Doing THIS? ➜ • Will I DESTROY My Pres...
👉DAY 25 - How Do I Fix An On/Off Kill Switch? ➜ • How Do I Fix An On/Off...
👉DAY 27 - Why Is There Black Oil Coming Out Of My Muffler? ➜ • Why Is There Black Oil...
👉DAY 28 - Can I Put A LONGER Bar On My Chain Saw? ➜ • Can I Put A LONGER Bar...
👉DAY 29 - Why Does My Engine STOP Running After A Few Minutes? ➜ • Why Does My Engine STO...
👉DAY 30 - Can I Make A Lawn Mower Run On Propane? ➜ • Can I Make A Lawn Mowe...
✅CLICK HERE TO BUY AN OIL EXTRACTOR ➜ amzn.to/3kq21st
✅IF YOU NEED PARTS OR TOOLS, CHECK OUT OUR AMAZON STORE ➜ www.amazon.com/shop/stevessma...
🔧WELCOME to the Steve’s Small Engine Saloon RU-vid channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
Connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
✅Follow Steve on TIKTOK ➜ / stevessmallenginesaloon
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #30daysofquestions #lawnmower #mower #mowerrepair #lawnmowerrepair #honda #craftsman #toro #husqvarna #troybilt

Хобби

Опубликовано:

20 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 319

@StevesSmallEngineSaloon Год назад

Click below 👇👇👇 for the links to the other questions... ✅CLICK HERE TO BUY AN OIL EXTRACTOR ➜ amzn.to/3kq21st ⭐30 DAYS OF QUESTIONS⭐ - (Links will be updated as the videos are put out) 👉DAY 1 - Is A Stihl 4-Mix Engine A 2-Stroke Or A 4-Stroke? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QF__8hs0bo8.html 👉DAY 2 - Are John Deere riding lawn mowers made by MTD? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iCJsWsd6SLo.html 👉DAY 3 - How Do I Break In A New Chainsaw? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NE4Q1Y8v2U4.html 👉DAY 4 - Does Soaking WeedEater Line In Water Actually Help? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-84hFN_jveMc.html 👉DAY 5 - Why Does My Briggs Lawn Mower Say Never Change The Oil? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IVGmetgOcgo.html 👉DAY 6 - Can I Use Outboard Mix Oil In My Chain Saw? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AlmegbfUJpU.html 👉DAY 7 - What Is Your Favorite Chain Saw? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wMJeH0jCcHM.html 👉DAY 8 - Why Does My Grass Chute Keep Plugging Up? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WtbhiNy42IU.html 👉DAY 9 - What Does The Purge Bulb Actually Do? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sbDPU73fQQY.html 👉DAY 10 - What Is Your Favorite Penetrating Oil? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jrzNv_Db0ZA.html 👉DAY 11 - How Do I UnFlood My Chainsaw Or Weed Eater? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n0UnfoL5qWk.html 👉DAY 12 - What Is The Best 2-Stroke Gas / Oil Mix Ratio? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--bsbKqZbyrw.html 👉DAY 13 - Why Does My Leaf Blower Bog Out When I Pull The Trigger? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-O4fMjSg7Z_U.html 👉DAY 14 - What Does WARRANTY Actually Mean? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-D-8054Q6vx0.html 👉DAY 15 - Can I Remove ETHANOL From My Gas? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qZo4ItYiMCQ.html 👉DAY 16 - Why Is My Pressure Washer So Hard To Pull Start? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Apipsdmf8qs.html 👉DAY 17 - Why Does My Chain Saw Leak Oil? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3P5ITSFWUZg.html 👉DAY 18 - Can I Use Old Dirty Motor Oil As Bar And Chain Oil In My Chain Saw? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ilRZNsBNE3Y.html 👉DAY 19 - Should I Buy My John Deere Lawn Mower From Home Depot Or My Dealer? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IZRjSYwYhyc.html 👉DAY 20 - Do Battery Powered Chain Saws Work Good? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zb8XNGfHsQU.html 👉DAY 21 - (FAKE NEWS) Honda Is Stopping Lawn Mower Production? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-y4TSwWHFb-o.html 👉DAY 22 - Will cleaning the rust off my flywheel help with spark? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-w8-exMgUhuc.html 👉DAY 23 - NO SPARK! How Do I Know If My Coil / Ignition Module Is Faulty? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HBFz_N0SxuY.html 👉DAY 24 - Will I Destroy My Pressure Washer By Doing THIS? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-22OlLNAZKa8.html 👉DAY 25 - How Do I Fix An On/Off Kill Switch? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IyaUpGh19CI.html 👉DAY 27 - Why Is There Black Oil Coming Out Of My Muffler? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SNHdUh5tRoA.html 👉DAY 28 - Can I Put A LONGER Bar On My Chain Saw? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OrRux_GSQQQ.html 👉DAY 29 - Why Does My Engine STOP Running After A Few Minutes? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-m5LEwNi-geM.html 👉DAY 30 - Can I Make A Lawn Mower Run On Propane? ➜ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UkYCa1WhFGs.html

@robertsmithe9941 Год назад

Honda push mowers are crap - they don't have headlights. In a future question maybe you could consider swapping places with your daughter April. Steve reads the question and April answers .

@EricMatson-ru7jj Год назад

I think for 50$ I can put the mower on its side and drain it!

@kenjett2434 Год назад

I disagree as I have a $500 Honda used one season flipped it to change oil and now the valves is stuck and no compression. This model isn't just tip on side to drain you have to turn it completely upside down. So have reached the conclusion that most mowers and riding mowers are all junk these days.

@Davido60 Год назад

The 30 days of questions is a great addition to the channel Steve and April. I vote to make it at least an annual event. Look forward to it every evening. A lot of good useful information. Thanks

@markcwynar6394 Год назад

I agree, make this 30 days of questions and the annual thing. ( Please)! Yinz are a Great Team, thanks

@beachbums2008 Год назад

@@markcwynar6394Mark you said YINZ,YOU MUST BE FROM THE PITTSBURGH AREA!

@bobrees4363 Год назад

My biggest gripe is that all the oil does not drain out when the mower is flipped on its side. I do not like mixing fresh clean oil with what's left of however many previous years oil in the sump. My current walk behind is a Murray with a B&S engine. supposed to hold 15 oz of oil, and it did when new; but when I fill it after draining, it only takes 12 oz to fill it.

@rickthelian2215 Год назад

Warm engine before emptying, makes the oil come out better as it thins the oil.😊

@kurtknispel9170 Год назад

Yeah. How does that work. 10w30 means it's 10w cold and 30w hot. So shouldn't it be thicker warm? 🤔 and I always change my oil hot too just wonder why it's thinner when it's advertised to get thicker

@rickthelian2215 Год назад

@@kurtknispel9170 in Australia we just use SAE30, except for Honda’s.we do use 10-30w, well the 10 is for colder weather zones the 30w is for normal weather conditions. The higher the w the thicker the viscosity of the oil is so in cold weather you want it at a thinner viscosity but when you pour it out of the bottle all oils are thicker at room temperature than at a hot temperature.

@philliphall5198 Год назад

Plus more slug comes out to

@rickthelian2215 Год назад

@@philliphall5198 yeah the general purpose of heating it especially when they don’t frequently change oil. It’s To Manuals Briggs push mowers generally oil changes every 50hours (excluding top up Models), Honda every 25 hours

@kurtknispel9170 Год назад

@@rickthelian2215 I run mainly Lucas oil stabilizer

@6900pilot Год назад

Great video April and Steve, maybe not regarding lawnmowers, but the sump plug as we call them, is actually beneficial where a lot of agricultural machines tractors etc have a magnet on the plug so any filings etc will stick to it and not damage the engine/transmission etc. 👍🏻

@tjclarke4604 Год назад

I actually have another answer for this. What was happening a lot back in the day, was the customer would do their own oil change, then when putting the drain plug back in, would over tighten it and crack the oil pan (steel tapered plug) or bust it off (plastic Tecumseh plug). Also, people would often lose the nylon gasket then wonder why it leaked. It was a massive problem for years. And yes, you are right, us mechanics don't even use the damn plug.

@waynestefinashen239 Год назад

Right on TJ you are 100% on this one

@douglashaffner6602 Год назад

😅

@rafaelespinoza6530 Год назад

❤😊🎉😮😢🎉

@hankfrankly7240 Год назад

I appreciate your effort. Been with you the whole way. I think the two of you are interacting well together sharing a lot of good information.

@crazybobc1 Год назад

These 26 days of questions has been awesome! Great job to who decided to do this. I would love to see you do this again.

@waynerowlinson6177 Год назад

You said it right! It's a perfect time to pop off the blade and sharpen it. I've serviced a lot of mowers for others as well and same thing, just tip it over. Also, I change my oil at least a couple times a year and our mowing season is pretty short here in Northern Ontario, Canada. With no filter to take out the metal filings from normal wear and tear it's the only way to get rid of them. As usual, thanks for the video!

@RaysLaughsAndLyrics Год назад

As long as you flip it upright after draining.. fine. But a problem occurs leaving it flipped while trying to refill with fresh oil... 😤😀

@s1kainer Год назад

As I get older, it is not as easy picking up the unit to flip it over. I am a fan of drain plugs. Just sayin' Thanks for your thoughts, Steve.

@earlhuff7847 Год назад

I hired the neighbor kid to come do mine. I pay him $20 for 10 minutes of work, saves my back and its done. Plus he learns to work on small engines and sharpen blades.

@netimage10s Год назад

Just make sure when you flip it over that the carburetor side is up.

@Slim.. Год назад

April & Steve thank you very much, hope you two have a great week.

@paulbetker2310 Год назад

Great advice about the oil change and blade sharpening at the same time. Warm oil is the only way to go. Thanks guys.

@TheAussieincalgary Год назад

I pulled out my rideon mower transaxle (K46), split the case and put drain plugs for the diff and the hydrastat pump areas.

@mikejoyal4855 Год назад

April, keep having patience. We're just guys. Simple, easily entertained. You rock!!

@michaelweatherhead9470 Год назад

Thanks for the video Steve and April well done ✅👍. Take care of yourself and family and be Blessed ❤️❤️.

@joeciarlette2296 Год назад

I never flipped a push mower over to change the blade. I tipped it to the handle, pulled the blade, loosened the drain plug, tipped back down on to pan, tipped back up, put in plug, replaced blade, tipped back down, filled with oil, done. Takes minutes and you don't have to worry about the other liquid in the mower, the gas.

@darylburnet8328 Год назад

STEVE, from the bottom of my heart I thank you. As an ex High School Tech Teacher I know what Im talking about. You and I loved helping others with advice for free. Have a Cascade Draught from Tasmania. My neighbours here have benifited from your help.

@aaronfw1316 Год назад

I must be a unicorn cause I have a Murray push mower given to me in 2006. It has a drain plug underneath which i use. Unfortunately I have to retire it as the compression is barely at 50psi now kept it going. Love you content.

@seanrich1367 Год назад

Thanks Ya'll. yes flip it over, works for me. Month near gone, great series of Q/A.

@bleachedpc Год назад

Great information Steve thanks

@sully547 Год назад

Thank you both, looks like you two are having fun. My Lawn Machine is getting old but it runs like a small quadraped but it does has a drain plug. I had no idea that they were done away with. I keep my old machines running like ... kinda new. I also drive a 1988 Isuzu Trooper which still runs like a top.

@johnphillips4342 Год назад

I have a Toro GTS self-propelled mover from 1986. I use it as a trim mower, so it's use is not too heavy. But for a 37 year old mower, it starts with one or two pulls. It has a drain tube out the bottom side of the engine so you don't have to lift or turn it over, you just have to have U shaped flow director under the spout or be quick to attach a plastic tube when you take the plug off.

@ronwatson4902 Год назад

That's just common sense. I like common sense if you can find it. Thanks again.

@pauldiesel4582 Год назад

Steve, I agree it is super simple to tip and drain. I remember trying to drain a lawnmower with the bottom drain plug, what a pain! I doubt you can get all the oil out either as well. Cut to the chase and tip it over!

@rebeltaz123 Год назад

You can't get all of the oil out through a plug that is literally in the BOTTOM of the engine, but you can get all of the oil out through a hole that sits below the top of the crank case when you turn it over? OK...

@jorgemont6093 Год назад

I agree, tipping the mower on it's side is a fast way to drain the oil. But I installed a magnetic plug on mine to catch metallic filling. My mower it over fifteen years old.

@kbrowne10 Год назад

So, how much do you think Ford saved by not installing a dipstick on the transmission of my 2015 Transit Connect ?

@johnnylogan5927 Год назад

Log splitter engines have no drain plug either and you cant flip a splitter over. Ive had a Briggs and now a Honda with no plugs. I just use a sucker tool and suck it out seems to work ok.

@dj-kq4fz Год назад

This has been a great series. Thanks!

@dougyoung3896 Год назад

Tipping lawnmowers and beers doesn't get any better than that !

@appleztooranges Год назад

I got a Honda hrx217 and love changing oil on it. So much easier than changing a snowblower engine oil lol.

@swingbelly Год назад

The problem I've encountered with machines that DO HAVE A DRAIN PLUG ie. lawn tractors, snow blowers and some older MTD mowers is the OIL MESS deposited on the machine/ground when the plug is removed. Often difficult to get a suitable recepticatle underneath to catch the old flowing oil. The paper towels do make a good firestarter though. "UP IN SMOKE".

@silvergrizzly316 Год назад

Awesome stuff SteveO!!! I feel like I'm gaining more and more knowledge every day buddy!🤯😁

@frank9649 Год назад

I use a suction gun....looks like a grease gun....I insert a smaller clear piece of tubing into the one on the gun so it fits in the fill hole and voila...oil change!! Tipping it sometimes you get a fuel leak...easier with the gun and they don't cost much and you can use it for a whole lot of other things.

@tractortalkwithgary1271 Год назад

I guess that may make sense from a manufacturing standpoint.

@nashguy207 Год назад

Steve most cars have oil drain plugs but not all. My dad and I both own a couple of cars that only don't have oil drain plugs they don't have dip sticks either. They cam from the factory this way.

@ku4nz Год назад

Thanks for video.

@eldergeektromeo9868 Год назад

Hey Steve: love your addition of April!

@roberthuntley1090 Год назад

Thanks for the video - agree that tipping the machine over is much easier than groping round in the caked on grass cuttings under the deck searching for a plug. A related question - is it worth changing the oil at all (with modern oils, engine design, relatively cheap cost to buy a whole new machine etc. etc.), particularly if you have a smallish lawn and only need to cut it a few times a year. My last mower died when one of the wheels broke away from the chassis (metal fatigue) after approx. 10 years - so is engine wear of significance any more. (I knew someone at work who never changed his oil, and it was never an issue with him).

@aaronpowell4885 Год назад

I'm the same way, been working on small engines for 20 years and walk behind mowers, I just flip em🙂

@comlbbeau Год назад

Coincidentally, I just changed the oil in my Husqvarna AWD mower, powered by Honda, and, as mentioned, it does not have a drain plug. I find it to be messier to have to tip the machine over to get the oil to drain out, and I don't think the oil evacuates as well. When filling the crankcase back up, it took only about 2/3 the advertised oil capacity.

@rontaylor6407 Год назад

Enjoying the videos and content! Keep it coming!

@vinceferraccioli4661 Год назад

I totally agree shapen blade clean the underside. 👍

@overlander123 Год назад

Spot on Steve.

@monzsterman Год назад

Turkey baster and a small hose works but takes awhile. I use a MityVac connected to a Mason jar with some hose. Does the trick perfect.

@AndysDogHouse Год назад

Hey Steve and April. Good video. I guess this is the way it is going to be from now on. Make things cheaper, and charge us more. Thanks for sharing.👍👍🍁

@mikejoyal4855 Год назад

Bring it, Stevie. You are the man.

@robertgoora Год назад

You guys are THE BEST!!!!?

@jeanlawson9133 Год назад

I have a rototiller with no drain plug....It has a five horse flat head Briggs and Stratton.... I bought it new put synthetic oil in it new and I don't think I have never changed it.... hasn't lowered level and feels good to touch... I may change it after I think 12 years...

@desfarrell5630 Год назад

Actually Steve & April, I miss the old drain plugs…. I used to remove the spark plug and air filter, then run my old mower every Spring over the inspection pit in my garage, take the blade off for sharpening, open the plug and drain the oil in to a drain tray overnight. Next day it was only a matter of replacing the plug and reattaching the sharpened blade. In with the oil, plug and air filter and off you go for another year! Now my new mower doesn’t have one and I hate flipping it over to drain it. I’ve gotten around it by using the oil vacuum pump to remove the oil so no flipping anymore!😊

@majorpayne5289 Год назад

Yeah, I remember my grandpa showing me the plug on the bottom of the old mowers.

@StevesSmallEngineSaloon Год назад

Right on

@samtate1260 Год назад

It’s the nylon gears they put in the mowers nowadays that make me angry they know they are going to break and make you buy another one great videos 👍🤘

@patrickcorbett8361 Год назад

Good to see that Brewschki back for " The closing toast " ! pc

@concernedcitizen3651 Год назад

Many great points!....Peace

@MrReadandlearn Год назад

What about all the engines with drain plugs that are obstructed by the design of the equipment ?

@ronsnow8342 Год назад

I found one of Steve's videos on the proper way to do this. You actually turn it on its side, not flip it over. It's worth watching.

@cumbrianhomestead Год назад

Yeh, I saw that one too and went and drained mine the next day; worked a charm!

@popey2710 Год назад

I've been putting off changing my oil because I felt like an idiot. Thanks for info mate.

@jayminasi6073 Год назад

steve, it is guaranteed to make a oily mess everywhere if you tip a mower over. i just bought the last Snapper Hi Vac walk behind mower and i realize that there is no drain plug

@justanotherviewer52 Год назад

My Craftsman riding mower (Briggs and Stratton engine) does not have a drain plug but it does have a push valve to drain the oil.

@NVanHiker 28 дней назад

The thing about drain plugs (especially magnetic drain plugs) is that you're going to get ALL the oil out, including that all-important metal debris. Tipping is never going to get that last bit of oil, which is also the dirtiest.

@geraldtreptow2590 Год назад

Drain like a beer?

@bigfish322 Год назад

Great Channel Steve and April!! Glad I found you! Just wondering where you guys are located? I be from Saskatchewan 🇨🇦 Thanks

@OregonOldTimer Год назад

The last walk-behind I bought said in the manual: Don't change oil. Just add more as necessary. That's the way I did it on a 1960 Chevy pickup I bought used in 1958, the one that created my rule: Never buy a vehicle that has an STP decal on it, but that's another story. Bought re-refined (stick and stones removed) oil for 10 cents a quart and kept a 5-gallon can of it in the truck. When the red light came on, I poured in more oil and kept on truckin'. But I digress...

@robertblacksmith4355 Год назад

I like my suction pump use it on alot of engines!

@paintnamer6403 Год назад

My Honda HR215 has the drain plug on the side. I do tilt it to get the last drops out. There is a small hole on the deck that the oil runs through to my repurposed bake pan.

@beachbums2008 Год назад

Steve you forgot to tell the people who have walk behind push mowers which side to flip the mower over. If flipped over on the filter side instead of the muffler side you'll soak the the air cleaner filter. Just my 2 cents worth. Keep the vids coming to Pittsburgh Pa. I always learn different things from them. God bless 🙏 you and yours. Have a cold beer on me,😆

@guitarhero9592 Год назад

I have an old Briggs and Stratton lawnmower engine. Changing oil myself for the first time. Do I put thread lock or anything on the drain plug before putting it back on?

@jimireland7299 Год назад

Rumour has it, Audi and BMW don’t have drain plugs, they use the siphon tower you referenced. I bought one and I use it for my push mower, my Quad, and my tractor, especially the hydraulics and axle fluid changes.

@stevelowndes5803 Год назад

Some countries including the Netherlands banned the sale of cars with sump plugs, to stop people dumping waste oil irresponsibly. Manufacturers try to make their products to suit all countries as much as they can. So what is banned in say California, can become the norm.

@johnmccormick175 Год назад

Great video 😀

@StevesSmallEngineSaloon Год назад

Thank You...

@IPullingTractor Год назад

Anything can be a piece of junk if it's not maintained or if it can't be maintained. But if there's a boss (thicker & flat area of metal) on the bottom of the oil sump, what I would is, remove the sump, and drill & tap 3/8 NPT threads in the boss & install a magnetic oil drain plug.

@wg4405 Год назад

I just restored a Toro AWD push mower with a Briggs OHV and it doesn't have a drain plug but has on the cover no need to change oil just add , yeah right so on its side it went and now it has new oil in it . I do use the drain plug if it has one . It's time for April to drink a glass of wine 🍷🍷🍷

@MKrebs-kl7ud 5 дней назад

Need to change the oil in an inherited Honda generator that was originally purchased in 2021. The oil I have on my shelf is Pennzoil with a date of 16feb21. Is this oil too old to bother using it for a change? Thanks Steve!

@Robalo-2660 Год назад

" Am I allowed?" Hell yeah brother, that's your trademark! It's called the pellet system , you get a reward when you complete your task. I try to stay a busy as possible. ;)

@beerdrinker6452 Год назад

Nice video.

@Leonardokite Год назад

The first time I ran across that it really ticked me off. But like you said, it's really not that hard and in the meantime one can take the blade off to sharpen it.

@jeffpiatt3879 Год назад

It's amazing , to me, that there are apparently so many people who think that chaning lawn mower oil is an inconvenience. I usually accomplish the task in less thamn 15 min. including cleanup. P.S. Love my Ferris mower with Vanguard motor that has "Oil Guard" system. Super easy to drain and fill, with the cartridge filter.

@ernestkooistra1559 Год назад

This is grreat!

@gharv1313 Год назад

Great info once again SteveO! Tip it over is the way I go😂. Cheers🍻 Steve and April Out

@OldJoe212 Год назад

Everything I own has drainplugs except my power washer. I have a $7 transfer pump from Harbor Freight. Works fast and I can pump the old oil right into a gallon jug. Just another option. Thanks for sharing your knowledge.

@bobbelsekwol Год назад

Same here. I've got 8 engines that need draining and the pump is a great addition.

@WJCTechyman Год назад

I used to drain the oil out of my Honda HR214 through the side drain plug but it made a mess of the deck. I just tip the machines I have now as the dip stick "funnel" is nice and long on them to make little mess.

@StevesSmallEngineSaloon Год назад

Right on

@woodrowwilliams1812 Год назад

When you flip it think about where the gas cap is.

@MJF40 Год назад

My Honda Eu2200’s are like this. Anything else would be difficult. Bigger ones do though.

@GuysPlayingWithTools Год назад

The new Briggs... never change the oil.... just kill me. I had one brought to me over-filled a couple days ago and he said "really?" when I rolled it over. I told him it had new oil already and this is faster. 🙂

@Holden-McGroin Год назад

Idk. I have a pressure washer that has no drain, and the manufacturer says it never needs to be changed, just topped off. What they don’t tell you is that the engine is probably only supposed to last 100 hours and fail so you have to buy a new one. I only bought this thing because it was 80% off at a box store.

@fixitfrank412 Год назад

I think it's because most people don't change the oil....let alone check it....on their push lawn mowers. Most of the new ones are sold with "Never Change the Oil, Check Only" as a gimmick anyways.

@jakeschisler7525 Год назад

My tiller i put a longer pipe on otherwise oil runs everywhere. Even my upright air compressor I put a longer pipe and elbow with a screw in plug. Since there is no way of catching the oil.

@greybeard5774 Год назад

That was a good one .. 😁👍

@silasaqui8833 10 месяцев назад

No beer today? I mainly watch your videos just to see that😂

@billyjackson5799 Год назад

Actually most of the push mowers I deal with do actually have the drain plugs on the bottom and it is actually a lot smarter to use the drain plug to drain the oil because you actually get all the old oil out as well as any dirt or debris that be in the engine because on most push mower engines where the dipstick goes in the engine there is usually a like a extra lip or something like a baffle and it doesn't let everything come out of the engine

@campbellpaul Год назад

I agree! I find draining from the bottom can sometimes more convenient, as well. If you find an old mower with sludge or particles (or both) in the sump, it is a breeze to simply remove the dip stick tube and shoot WD40 through it, with the plug off, getting all that bad stuff out.

@billyjackson5799 Год назад

@@campbellpaul yep that's why stick using the drain plug because someone had gave really nice push mower one time and I decided to change the oil in it because it had been setting for while and tried the method of draining oil out the dipstick and filled it fresh oil fired it up let it run for few minutes then it made rattling noise then locked up I took apart and found that there was like a mixture of dirt some really fine sand like substance that built up in from where it had been setting and none of had came out with the old oil where I had drained it out the dipstick

@Barbarra63297 Год назад

We bought an MTD rider, never once did I think 'oh, I should check to see where the oil plug is'. Well, I should have because it doesn't have one. So I bought a battery operator extractor only to find that the head where the impeller is on the extractor doesn't fit into the oil neck. I can see it on walk behind mowers but riders? No, that is crap lol. I do have a question though, when you extract opposed to draining, can you get all the old oil out?

@ronaldbrown5745 Год назад

On some self propelled walk behinds the running gear made it so you couldn’t get to the drain plug.

@leosweeney7955 Год назад

I always believed, the manufactures figured out most people, didn't change the oil anyways, so lets eliminate that (example) .03 cent part. If they make (example) 1 million engines a yr, they pocket $30,000, on that one part.

@corey6393 Год назад

Over several decades of lawn mower maintenance, I don't recall ever having used the drain plug on a walk behind mower. Flip it. drain it, fill it, done.

@robertchall8576 Год назад

I got a used honda push mower I took a few bolts out of the crank case before I realised it didn't have a plug.

@user-yg8ks5ux1n 14 дней назад

What... thought I knew more about a old Briggs engine

@alexflores7816 Год назад

What brands does MTD manufacture? I know they manufacture Cub Cadet, Craftsman and perhaps Troy Bilt.

@Oklahoman-in6ph Год назад

What about any metal sludge that settles at the bottom? What do we do about that?

@leechan9678 Год назад

Hello Steve, I have Toro lawnmower that oil is leaking out from crank case breather into air filter and I'm losing power when I take the crack case breather tube off run good but oil is coming out how would you fix this problem

@MrToddles12 Год назад

Just a suggestion.....you should both be cracking a beer before or after your program. Maybe she doesn't like beer but always thought that was a highlight to your programs lol.